3105 aluminum alloy is a typical deep-drawn material. The aluminum content is up to 98%, which can belong to the category of pure aluminum alloy, which is slightly stronger than the 1 series alloy with aluminum content of about 99%. Similarly, 3105 aluminum alloy cannot be strengthened by heat treatment, but its corrosion resistance, formability and welding properties are also excellent. Therefore, 3105 aluminum alloy is commonly used in the manufacture of residential wall panels, mobile homes and rain gear, bottle caps, lamp headstocks, shutters, etc. In addition, it is also used for sheet metal work. However, 3105 aluminum alloy has medium machinability, so lubricating oil treatment is required in all machining operations. And most importantly, 3105 aluminum alloy temper also affects the machinability required for our different applications. For example, the (H) harder temper is better than the 3105 aluminum alloy in the (O) annealed temper. But no matter how tempered the 3105 aluminum alloy is, the forming characteristics of the 3105 aluminum in all conventional processes are very good.
8011 aluminum coil adds Fe-Si elements on the basis of 1 series pure aluminum. If the total alloy elements exceed 1%, its alloy properties will have higher advantages. It is commonly used to make aluminum foil below 0.2 and aluminum coils of 0.2-0.5. Its performance is better than that of pure aluminum foil, and it is widely used in aluminum foil and aluminum coil thin materials. Status: O, H12, H14, H16, H18, H22, H24, H26 Supply method: aluminum coil, lamination, strips Surface treatment: smooth aluminum, mirror surface, patterned aluminum coil Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional)
1050 pure aluminum coil has low density, good electrical and thermal conductivity, good corrosion resistance, and good plastic processing performance. It cannot be strengthened by heat treatment. The strength can be improved through cold deformation. The only form of heat treatment is annealing. 1060 aluminum coil is industrial pure aluminum with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity. It has good elongation and tensile strength, but its strength is low and heat treatment cannot enhance the machinability. 1100 aluminum coil belongs to the aluminum series, its strength is relatively low, and it has excellent ductility, formability, weldability and corrosion resistance; the corrosion resistance can be further improved after anodizing, but it cannot be strengthened by heat treatment. Status: O, H12, H14, H16, H18, H22, H24, H26 Supply method: aluminum coil, lamination, strips Surface treatment: smooth aluminum, mirror surface, patterned aluminum coil
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. Itâ??s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1 - surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2 - The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3 - Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4 - Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
3003 aluminum coil is a common aluminum alloy coil, mainly composed of aluminum and manganese, with good corrosion resistance, workability, and welding properties. Its main uses include manufacturing various types of oil tanks, pipelines, pressure vessels, food and chemical processing equipment, etc. The product characteristics and application scope of 3003 aluminum coil are as follows: Good corrosion resistance, suitable for equipment and structures working in harsh environments. Good deep-drawing and welding properties, easy to process into various shapes and sizes of products. Smooth surface, easy to perform surface treatment and painting. Widely used, including manufacturing automobile parts, building materials, power equipment, electronic components, food packaging, etc. Overall, 3003 aluminum coil is a high-quality aluminum alloy material with good physical and chemical properties, suitable for production and manufacturing in various industrial and civil fields. 3003 aluminum coil is an aluminum-manganese alloy coil, whose main components include: Aluminum (Al): accounting for about 98% of the aluminum coil, it is the main component, with lightweight, high strength, good conductivity, and thermal conductivity. Manganese (Mn): accounting for about 1%~1.5% of the aluminum coil, it can increase the strength and hardness of the aluminum coil, improve its corrosion resistance and weldability. Other elements: 3003 aluminum coil may also contain small amounts of copper (Cu), iron (Fe), silicon (Si), and other elements, as well as trace impurities. The content and proportion of these components will have a certain impact on the performance of 3003 aluminum coil. For example, the content of aluminum and manganese has an important influence on its hardness and strength, and the addition of copper, iron and other elements can improve the heat treatment and processing properties of aluminum coil. Therefore, precise control of its chemical composition is needed during the production of 3003 aluminum coil to ensure its stable performance and excellent quality.
3003 aluminum disc is an aluminum product processed by aluminum coil through stamping equipment, usually in a round shape. 3003 aluminum circles are divided into tableware aluminum circles, cosmetic aluminum circles, stamping aluminum circles, signage aluminum circles, etc. Commonly used in tableware, kitchen utensils, cooking utensils, cosmetic bottle caps, medicine bottle caps, lamps and utensils, hardware and electrical shells, billboards, traffic sign processing, etc. Joda Aluminum has an advanced stamping production line, which can produce aluminum sheet products with a thickness of 0.2-10 mm and a diameter of 50-1500 mm. Special shapes can be customized by making molds. Joda3003 aluminum disc has good tensile properties, no scratches, no oil stains on the surface, good ductility, and is suitable for users to carry out subsequent processing such as anodizing, spraying and coloring.
Hot-rolled 1100 aluminum plate uses: deep drawing material, bottle cap, wide building curtain wall, bus interior, bus door/engine plate, decoration, aluminum busbar, transformer aluminum, heat sink, etc.; Application of 1100 aluminum foil coil: aluminum-plastic panel, electronic foil, battery foil, etc. The role of aluminum plate 1. It has high corrosion resistance, electrical conductivity and thermal conductivity, low density and good plasticity, and can produce various aluminum materials through pressure processing; 2. The strength of 1100 alloy aluminum plate is low, but it has good ductility, formability and weldability; 3. After anodizing, the corrosion resistance can be further improved, and a beautiful surface can be obtained at the same time;
1050 aluminium discs circles possess high aluminum content. They are the most applied alloy on the market and relatively cheaper. 1050 aluminium discs for sale are of high flexibility, corrosion-resistant, and good conductivity to the electricity and heat. The anodised aluminium discs are alomost immune to the discoloration. 1050 Aluminum Circle CC / DC Application: 1050 aluminum circle discs are of good cold-work-molding characteristic, the elongation is between 35%-38%, it's stable and better-valued. 1050 aluminum discs are the softest aluminum disc. As aluminum discs suppliers, Joda Tech usually process the 1050 aluminum circle into cookware set and containers. But 1050 round aluminum discs also have the advantages of aluminum. So 1050 large aluminum discs can be applied in many other industries.
5052 aluminum plate is an AL-Mg alloy aluminum plate, which combines the advantages of 3 series anti-rust aluminum and the excellent formability of 5 series. It has moderate strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, and is durable. Good corrosion, good weldability, poor machinability, can be polished. Application areas: transportation vehicles, ship sheet metal parts, aircraft fuel tanks, etc. 5083 aluminum plate belongs to the Al-Mg series alloy and is widely used. Especially in the construction industry, this alloy is inseparable and it is a promising alloy. It has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application fields: ships, automobiles, aircraft welding parts, subway and light rail, etc. 5754 aluminum coil is a typical aluminum plate among Al-Mg alloys. It has the characteristics of medium strength, good corrosion resistance, weldability and easy processing and forming. Application areas: automobile manufacturing industry, doors, bodies, seals, etc. 5182 aluminum plate has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application areas: automobile body panels, control panels, reinforcements, automobile fuel tanks, electrical appliance casings, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.
