Water Based Anti Corrosive Metal Primer

Product Data Sheet
GENERAL DESCRIPTION

An easy-to-use, water-based primer specifically formulated to �¢??lock-out�¢?? corrosion on a wide range of metals. Applied correctly, is guaranteed for years.

USES

Suitable on sheet metal, castings, wrought iron, TNT Bar, steel Bar and steelwork. This product is not recommended for automotive use.

COLOURS

Available in natural green.

SIZES

Available in 4 litre,10 litre and 20 litre

COVERAGE

Up to 14 square metres per litre depending upon surface porosity and application method.

APPLICATION

Roller, brush, dip or airless spray. Provide adequate ventilation during use.

DRYING TIMES

Touch Dry Time - 20 minutes. Recoat Dry Time - 2 hours. Drying times refer to normal conditions (30�?�°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary. DO NOT USE IN TEMPERATURES BELOW 10'c OR ABOVE 45C.

DANGEROUS GOODS CLASSIFICATION

Not classified as Dangerous Goods.

SURFACE PREPERATION

Previously Painted Surfaces :

Scrape off loose and flaking paint and make sure the remainder is firmly attached. Sand glossy surfaces and enamels thoroughly and wipe clean. Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer.

TNT BAR,STEEL BAR AND IRON:

Remove all grease, dirt and other surface contaminants.Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust with. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer