I.Measurement principle: Transmit very low energy and very short microwave pulse then transmitting and receiving by the antenna system.Radar wave are running at the speed of light.Running time can be transformed into material level signal by electronic parts.A special type of time extension method can guarantee the stability and accurate measurement in a very short time. Even if the condition is complex , has false echo, can accurately analyze the level of the echo with the latest micro-processing technology and debugging software. Paper ctn.
5(60)a with 1-4 pairs of accessorial terminals 10(100)a with 1-4 pairs of accessorial terminals Overall dimensions:160*112*71
Features: The meter is a positive displacement water meter with bottom load facility Non-lead bronze meter body Technical data conforms to awwa c708 standard Magnetic drive with lower transmission resistance Easy to read and installation. Email us
Profile A certain amount of water as defined by meter body passing through makes piston move. The measuring structure records its movements. Movements times defined amount making total amount of water passed registered. Features 1. Rotary piston structure. It registers total amount of water passed in the tube by calculating how many times the piston rotates. 2. Dry and wet type are both separated from water so as to keep the registering clear. 3. Registering is stable and high-graded measurement. Easy to install. 4. Long endurance with no rotating inclination and long work life. 5. Various types available to register pure water or to be installed in any position. 6. Remote transmission device can be added upon request. 7. Different structures and specifications with beautiful appearances are available. 8. Meter bodies can be of copper, SS or plastic. 9. All technical figures are conformed with GB/T778.1~3-1996 which is equivalent to IS04064 Standard Class C. Working condition L Water temperature≤ 45º C L Water pressure≤ 1Mpa (≤ 0.6Mpa for LXH-8S). Maximum permissible error L From the minimum flow-rate (qmin ) inclusive to the lower zone of the transitional flow-rate (qt ) exclusive: ± 5%.
The water enters the meter from the inlet of the meter body and impacts the vane wheel at the tip of the vane blades to make it rotate. The water flows out from the outlet of the body. The rotation of the vane wheel (proportional to the velocity of water flow) is transmitted directly to the central gear in the vacuum-sealed register by the magnetic coupling. The sealed register totalizes and indicates the water volume passing through the meter. Working condition -Water temperature≤ 50º C (Hot water meter≤ 90º C) -Water pressure≤ 1MPa (PN: 1.6MPa/16bar) -Δ P≤ 0.1MPa Accuracy -From minimum flow-rate (qmin) inclusive, to transitional flow-rate (qt), exclusive: ± 5% -From transitional flow-rate (qt) inclusive, to overload flow-rate (QS), exclusive: ± 2% (Hot water meter: ± 3%. Features 1. Wet, dry, liquid sealed 2. For hot or cold water 3. Small, light 4. Brass body or plastic body, optional 5. Brass body can be painted or nickel coated 6. High accuracy 7. The meters conform to ISO4064 Standard Class B or Class C.
Product synopsis Application:used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Model: CM8829S With separate probe(s) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution: 0.1/1 Accuracy: í+1-3%n or í+2.5um Min. measuring area:6mm Min. sample thickness:0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating conditions:0-+45íµ(32¿H-104¿H),í_90%RH Dimensions: 126x65x27mm Weight: 81g(not including battery)
Specifications Display: 4 digits LCD, backlit Range: 0~1250 ¬ªm/0~50mil (other ranges can be specified ) Min.radius workpiece: F: Convex 1.5mm/Concave 25mm N: Convex 3mm/ Concave 50mm Min. measuring area: 6mm Min.Sample thickness : 0.3mm Resolution: 0.1 ¬ªm (0~99.9¬ªm); 1 ¬ªm (over 100¬ªm) Accuracy: f+1~3%n or 2.5 ¬ªm or 0.1mil (Whichever is the greater) Bttery Indicator: Low batter indicator. PC interface: with RS-232C interface Power supply: 2x1.5 AAA(UM-4) battery Operating condition: Temp. 0~50f¦ . Humidity
Acceleration 10Hz-1KHz 0.1-400m/ms+ 0.3-1312ft/ms+ 10Hz-10KHz 0.1-400m/ms+ 0.3-1312ft/ms+ Velocity 10Hz-1K 0.1-400mm/s 0.004-16.0inch Displacement 10Hz-1KHz 0.001-4.0mm 0.04-160 mil Accuracy:++5% Auto power off RPM(revolution):5-100000r/min Frequency:0.1 to 10KHz Metric/imperial conversion With RS232C interface Max hold Operating conditions:0-+45f+(32=¬-104=¬),f-90%RH Power supply:4x1.5V AAA(UM-4)battery Battery indicator: low battery indicator Optional accessories: RS-232C cable & software: 1.USB adaptor for RS-232C 2.Bluetooth interface Dimensions : 124x62x30mm Weight: 120g(not including battery)
Application: Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.Is pecifically designed for present measuring various mechanical vibration. So as to prove the data for the quality control, run time and equipment upkeep. Iuse the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation. Specifications: Acceleration 0.1-200m2/s (10Hz to 1KHz 10Hz to 10KHz ) Velocity : 0.1-200mm/s0. (10Hz to 1KHz) Displacement: 0.001-2.0mm(10Hz to 1KHz) Accuracy:·+5¼t Auto power off Max hold Operating conditions:0-+40f¦(32+H-104+H),f_90%RH Power supply: 4x1.5V AA(UM-3)battery Battery indicator: low battery indicator Dimensions : 160x68x32mm Weight: 181g(not including battery)
Wholesale PH Meter
CI series counter features: 1) Two line 6 digital LED display, counting range up to 999999; 2) Counting speed is up to 10KCPS, suitable to high speed counting application; 3) NPN / PNP input selectable, selected by software menu; 4) Prescale coefficient value setting range 0.001 to 99.999, easy to transform input pulse to actual physical value, such as length, convenient to read directly; 5) Up to two alarm output (counting / length counting), and one batch counting output; 6) As timer, up to 9 timing mode for selection; 7) 5 different panel size for selection, biggest size up to 80Hx160Wmm, with large LED display; 8) Switching power supply 100-240V AC/DC, suitable to different power supply. 48*48mm, 48*96mm,72*72mm,can be choosed one product in one standard paper box.
SV8 series presure sensor meter Features: a. mA, mV, Rt signal input,selected by software, full scale and zero point can be changed; b. 2 settable alarm output, capacity: AC250V/3A or DC 30V/3A; c. 4--20 mA output; Relay alarm output; d. with RS 485 communication function(order); e. power supply: 85-265VAC/D; with 24V DC power supply(order); f. accuracy: 0.5%FS dimension:48H*96W*100L. 48*96mm dimension one product in one standard paper box 400g/pcs.
Xl5135v-1 ac220v power supply--measuring dc voltage--voltmeter Technical index: Digit display: 1999 Operating temperature:0~40 Relative humidity:20%~80% Power supply:ac220v Installation method:inlay Tapping size:76 x 39 (mm) Dimension: (w) 79mm x (h) 42.5mm x (d) 25.5mm Resolution: 10mv Input impedance: 100mª+ Max. Input voltage:ía10v Full range:ía199.9mv.
DIN-Rail Single Phase Energy Meter with Counter(DDS-1Y-M) Executive Standard: IEC62052-11 2003; IEC62053-21 2003 DIN-rail standard: "SO"43864. Function and characteristic: Long terminal block; Nameplate inside; Measure power accurately; Anti-creep. Technical Data: Rated voltage: 110V, 220V, 230V, 240V; Rated current: 5(30)A, 5(60)A, 10(80)A, 5(80)A; Frequency: 50-60Hz Connection mode: Direct type Display: Counter 6+1=999999.9kWh Accuracy Class: 1.0 Power consumption: Un1W (when 220V 20A) Start current: 0.004Ib Standard work temperature: -20-45degree. Crelative humidity: 85%. Size: 115*78*65mm.
Single Phase kWh Meter Executive Standard: IEC62052-11 2003; IEC62053-21 2003 Function and characteristic: Infrared function; Measurement accurately. Technical data: Rated current: 1.5(6)A 5(30)A 10(40)A 5(60)A 20(80)A Rated voltage: 110V 220V 230V 240V Display mode: LCD 6+1=999999.9kWh Accuracy class: 1.0 Frequency: 50Hz (60Hz) Impulse constant: 800/1600imp/kWh Connetion mode: CT type; Direct type. Size: 153*118*50mm.
Introduction: Equipped with our companyí»s code controller, base meters are bought abroad to realize the prepaid and control functions, thus to achieve the automatic control of different functions of this new type of gas meter. Range of application: This product can be applied to the measurement of gas, natural gas, liquefied petroleum gas and other non-corrosive gases in the city. Main features: Automatic prepaid function: charging before using of it, water meter residual capacity= the original gas + newly purchased gas Auto-control function: switching the gas path automatically according to the payments and gas situation. Real time computation function: measuring on the real time and display the stock value, closing gas source automatically when the purchased gas is used up. Power-down memory function: solid state recorder is internally installed and the data will be permanently preserved. Status display function: displaying the amount of newly charged gas, the remaining stock and cumulative use, as well as low-voltage state etc. Prompting function: warning when the remaining gas is used to the set value or other functions are out of work. Overdrawing function: able to set a certain overdraft gas according to the user needs Automatic alarm function: when the voltage is lower than certain point, alarm system will be operated and the battery must be replaced within 72 hours, otherwise, it will automatically shut down the gas resources. Anti-gas-larceny function: shut down the gas supply automatically when there are theft of gas or illegal operations Technical parameter: 1ú¬base meter operation criteriaú¦gb/t6869 q/ofd.001-2007 jjg577-2005 2) current working voltageú¦3.00v 3ú¬cuiescent currentú¦=8 years 5ú¬life span of valveú¦switching frequency more than 5000 times 6ú¬accuracy degreeú¦level b 7ú¬four anti-functionú¦anti-attack, waterproof, anti-smoke, anti-knocking
Depth of Investigation v 400 meters a. Transmitter 1) Constant Current Selected automatically depending on ground conditions Max. Current 500mA Min. Current 1mA 2) Voltage (Max) 500 V (1000 Vpp) 3) Power 40W b. Amplifier Voltage Measurement Input Impedance 10 M Ohm Input Range 0-200V Precision + 0.05 mV Noise Rejection 95 dB at 50-60 Hz c. Resistance Measurement Apparent R Range m Ohm, Ohm, K Ohm Apparent R Precision 0.02 m Ohm at 500 mA d. System Data Cycle time 12 seconds Accuracy 2% Diagnostic display 9 codes Temp. Range 0 v 50 degree c e. Power Source 12 Volt, 12 Ah Rechargeable Battery Measuring capacity 2000 readings at 20 mA 200 readings at 500 mA f. Weight 12.5 Kg g. Dimensions L 400mm X W 225mm X H 330mm Weight 20 kg of instrument Additional Accessaries 60-80 Kg.
Wavelength Range: 190-1100nm Spectral Bandwidth: 2nm(5nm,1nm optional) Wavelength Accuracy: í+0.5nm Wavelength Reproducibility: 0.2nm Photometric Accuracy: í+0.5%T(0-100%T), í+0.002A(0-0.5A), í+0.004A(0.5A-1A) Photometric Reproducibility: 0.2%T Working Mode: T, A(-0.33A), C, E Stray Light: í_0.1%T(NaI,220nm;NaNO2, 340nm) Baseline Flatness: í+0.002A Stability: í_0.002A/h( At 500nm, After warming up) Noise: í+0.001A(at 500nm, After warming up) Detector: Silicon photo-diode Display: 6 inches high light blue LCD Power: AC:220V/50Hz,110V/60Hz,140W Dimensions: 530í-410í-210mm Weight: 18kg.
1.General PZ96 Series power analyzer specializes in measuring the data of all kinds of AC networks, such as the currents, the voltages, the powers, the energies etc... It may be used for local display, or it is connected with the control equipment in measuring and controlling system. They are a kind of programmable analyzer. With the 4 key on the front, we can set their parameters according to the network which we measure. They have many option functions. They can be equipped RS-485 communication with Modbus-RTU protocol; or they can output analog signal. With logic input or logic output, we can realize controlling other equipment remotely They are a kind of analyzer with excellent cost performance, since they regroup the functions of traditional electric transmitter and digital meters. Therefore they are widely being used in kinds of control system, SCADA system and power management system. 2.Technical feature - Input Network: Single-phase network; 3-phase balanced network, 3-phase unbalanced, 3 wires; 3-phase unbalanced, 4 wires Measurable: 26 parameters (3I, 6U, F, 4P, 4Q, 4cos, 4E) Frequency: 45í½65Hz Voltage: AC 100V, 400V (programmable); Overload: 480V (continuous), 800V/30s; Consumption: < 0.2VA Current: AC 1A, 5A (programmable); Overload: 6A (continuous), 50A/30s; Consumption: < 0.2VA Thermal drift: 100Mª+ - Environment Work T: -10Cí½+45C Storage T: -20Cí½+70C Relative humidity: 5%í½95% (no condensation) Altitude: í_2500m 3.Options - Display (L): LED or LCD display, the brightness can be set - Communication (/C): RS485 (Modbus-RTU); 1 start bit, 8 data bit, 1 stop bit, no parity, speed (1200/2400/4800/9600/19200) - Alarm output(/J): 1 passive relay (1A/30VDC, 1A/250VAC); alarms of over voltage, low voltage and over current; The hysteresis and the delay can be set - Analog output(/M): DC4~20mA, DC0~20mA( load < 600ª+), DC0~5V,DC1~5V( load > 1kª+); Number: /M, /M3 (1 or 3 analog outputs) - Logic options(/K) 4 logic inputs and 2 logic outputs Logic Input: dry contact Input, supplied inside, optoisolator Logic output: NO-NC contact; 1A/30VDC,5A/250VAC ( to control other equipments) - Accuracy: 0.2 Note: /M and /K can not be chosen simultanously. 4. Specification 96 * 96 mm PZ96-E3 3 Phase LED PZ96L-E3 3 Phase LCD 72 * 72 mm PZ72-E Single Phase LED PZ72L-E Single Phase LCD 80 * 80 mm PZ80-E Single Phase LED PZ80-E3 3 Phase LED PZ80L-E Single Phase LED PZ80L-E3 3 Phase LCD 120 * 120 mm PZ42-E3 3 Phase LED PZ42L-E3 3 Phase LCD 144 * 144 mm PZ144-E3 3 Phase LED
The product is used to measure the pH of given aqueous sample.The Range is from 0pH to 14pH.It is given with automatic temperature sensor.