Guangzhou Landtek Instruments Co. Ltd. is one of leading professional manufacturers of meters and instruments in China. Manufacturer & OEM We can supply the following products: *Ultrasonic Thickness Meter *Coating Thickness Gauge *Moisture Meter *Vibration Meter *Gloss Meter *Surface Roughness Tester *Surface Profile Gauge *Leeb Hardness Tester *Shore Hardness Tester *Barcol Impressor *Window Tint Meter *Tachometer *Engine Tachometer *Stroboscope *Anemometer *Sound Level Meter *Sound Level Calibrator *Lux Meter *Dew Point Meter *Humidity Meter *Tempereture Meter *Belt Tension Tester *Screen Tension Tester *Force Gauge *PH/ORP Controller *Throttle Potentiometer Tester *Fuel Pressure Meter, etc.. For more details,please do not hesitate to contact us.Thank you!
Product name: 2D measuring instrument Detailed product parameter description: Product model: SRN1515 Instrument features The Z axis adopts a new design of cross rails and counterweights. The lens is lifted and lowered with balanced force to ensure accuracy. The continuous zoom lens can be continuously zoomed from 20X to 120X. The LED cold light source (upper and lower light sources) avoids secondary deformation of the workpiece. Easy-to-use image measurement software. Gapless friction transmission, small-range fine-tuning and fast movement are possible. The optical image measuring instrument not only uses high-definition CCD imaging, combined with multi-pole zoom objective lenses, but also comes with easy-to-use image measurement software. It has point, line, circle, two-point distance, angle measurement functions and coordinate translation functions. The measurement data can be exported to EXCEL, WORD or the geometric figures of the measured elements can be exported to DXF. The automatic edge-finding function of the software further enhances the measurement accuracy and reduces human errors.
Product synopsis Application:used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Model: CM8829S With separate probe(s) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution: 0.1/1 Accuracy: í+1-3%n or í+2.5um Min. measuring area:6mm Min. sample thickness:0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating conditions:0-+45íµ(32¿H-104¿H),í_90%RH Dimensions: 126x65x27mm Weight: 81g(not including battery)
Measurement Range Aú¦50~12000FPM Bú¦50~40000 FPM Cú¦50~20000 FPM Dú¦50~30000 FPM Eú¦50~2000 FPMú¿fit for print and textileú¬ Displayú¦5 10mmLCD Accuracyú¦í+ú¿0.05%n+1dú¬ Resolutionú¦0.1 FPMú¿ Less 1000 FPMú¬ 1 FPMú¿Over 1000 FPMú¬ Sampling timeú¦0.3second 2 rangesú¦HíóL ú¿High, Low ú¬ Flash adjustú¦Coarse adjustmentíófine adjustment , í-2 and í-2 for fast check Triggering Modeú¦Interior/Exterior Temperatureú¦0~40íµ Humidityú¦Less than 85%RH
Product synopsis Model: HM-6561 Typical Applications Die cavity of molds Inspection of bearing and other mass produced parts on a production line Failure analysis of pressure vessel, steam generator and other equipment Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces. Testing surface of a small hollow space Material identification in the warehouse of metallic materials Rapid testing in large range and multi-measuring areas for large-scale work piece Testing Features Palm size for narrow space. Test at any angle, even upside down. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL. Large memory could store 250 groups including single measured value, impact direction, material and hardness scale etc. User recalibration function allowed. Can communicate with PC computer for statistics and printing by the optional cable. Manual or automatic shut down. Low battery indication. Technical Specifications Display: 12.5mm LCD with back light Accuracy: Display error í+0.8% at LD=900 Measuring range: 200-900L Conversion: HL-HRC-HRB-HB-HV-HSD Materials: 9 different common materials With RS232C interface Memory: 250 data can be stored and re-readable Impact device: D Will handle the majority of hardness testing applications. Weight: 75g Power supply: 2x1.5V AAA size battery Working temperatureú¦ - 10íµí½ú½50íµ Storage temperatureú¦- 30íµí½ú½60íµ; Relative humidity: í_90úÑ Dimension: 146í-65í-36mm Weight: 130g (not including batteries)
Product Introduction The wet gas flowmeter is a volumetric gas flowmeter. Its measurement range ranges from 0.016L/min for small flow to 200L/min for large flow. It has high accuracy, no leakage, and good stability. It is suitable for gas volume or flow measurement in laboratories, research institutions, environmental measurement, production sites, etc. It can also be used as a transmission standard and working standard, and is widely used in gas appliances, energy, chemical industry, environment, medicine, calibration and other industries. The products have been exported to Europe, America, Asia and other countries and regions. � Product Features 1. Extra-wide flow range 1:300 2. Repeatability better than 0.1% 3. Intelligent correction (Volume and flow rate automatic correction) 4. Various automatic measurement methods (constant volume output, timing output, and fixed whole revolution output) 5. Full digital flow meters (Temperature, Pressure, Volume, High-precision measurement of flow, RS485 Bus Communication) 6. Intelligent wire control start and stop 7. Each is strictly calibrated with � 0.05-stage active piston prover to ensure accuracy 8.� No leakage (using advanced magnetically coupled transmission technology, non-oil seal) � Precision (Repeatability) Standard Flow Range: �± 0.1% (Standard deviation) Entire Flow Range: �± 0.15% (Standard deviation) � Material (Anti-corrosion) 304 stainless steel 316 stainless steel (customized) Temperature measurement: 0-50 Pressure measurement: 0-10kPa
Supplier: Electrical measuring instruments and meters
SM 500 - Portable metallurgical microscope with on-off megnetic stand which can easily inspect metallography of large workspace on spot
Product synopsis Model:SRT-6210 1.Features: This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD. * Multiple parameter measurement: Ra, Rz, Rq, Rt * Highly sophisticated inductance sensor * Four wave filtering methods : RC, PC-RC, GAUSS and D-P * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation. *The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC. *Metric /Imperial Conversion 2.Specifications Display 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra, Rq: 0.005-16.00um/0.020-629.9uinch Rz,Rt: 0.020-160.0um/0.078-6299uinch Accuracy: +10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 5um Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN(0.4gf) Probe Angle: 90p Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 5l Driving speed: Sampling length = 0.25mm Vt=0.135mm/s Sampling length = 0.8mm Vt=0.5mm/s Sampling length = 2.5mm Vt=1mm/s Returning Vt=1mm/s Profile digital filter Filtered Profile: RC Filtered Profile: PC-RC Filtered Profile: Gauss Non-Filtered Profile: D-P Resolution : .001m if reading ú+10m 0.01m if 10m_readingú+100m 0.1m if reading 100m Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50µ Humidity
Supplier: Laboratory instrument / laboratory apparatus / measuring instrument / water quality measuring instrument / ph meter/ do meter / conductivity meter
