1.General
PZ96 Series power analyzer specializes in measuring the data of all kinds of AC networks, such as the currents, the voltages, the powers, the energies etc... It may be used for local display, or it is connected with the control equipment in measuring and controlling system.
They are a kind of programmable analyzer. With the 4 key on the front, we can set their parameters according to the network which we measure. They have many option functions. They can be equipped RS-485 communication with Modbus-RTU protocol; or they can output analog signal. With logic input or logic output, we can realize controlling other equipment remotely
They are a kind of analyzer with excellent cost performance, since they regroup the functions of traditional electric transmitter and digital meters. Therefore they are widely being used in kinds of control system, SCADA system and power management system.
3.Options
- Display (L): LED or LCD display, the brightness can be set
- Communication (/C): RS485 (Modbus-RTU); 1 start bit, 8 data bit, 1 stop bit, no parity, speed
(1200/2400/4800/9600/19200)
- Alarm output(/J): 1 passive relay (1A/30VDC, 1A/250VAC); alarms of over voltage, low voltage and over current;
The hysteresis and the delay can be set
- Analog output(/M): DC4~20mA, DC0~20mA( load < 600ª+), DC0~5V,DC1~5V( load > 1kª+); Number: /M, /M3 (1 or 3
analog outputs)
- Logic options(/K)
4 logic inputs and 2 logic outputs
Logic Input: dry contact Input, supplied inside, optoisolator
Logic output: NO-NC contact; 1A/30VDC,5A/250VAC ( to control other equipments)
- Accuracy: 0.2
Note: /M and /K can not be chosen simultanously.
4. Specification
96 * 96 mm
PZ96-E3 3 Phase LED
PZ96L-E3 3 Phase LCD
72 * 72 mm
PZ72-E Single Phase LED
PZ72L-E Single Phase LCD
80 * 80 mm
PZ80-E Single Phase LED
PZ80-E3 3 Phase LED
PZ80L-E Single Phase LED
PZ80L-E3 3 Phase LCD
120 * 120 mm
PZ42-E3 3 Phase LED
PZ42L-E3 3 Phase LCD
1800M3/H Electric fire monitor / water,foam monitor
Water/ foam monitor for FIFI 2 system
Specification
Medium : Water/ Foam
Certificate : LR
Type : electric remote control double pipe fire monitor , with JET & SPRAY TYPE
Model : SS250EL
Capacity : 1800m3/h( water)
Foam : 300m3/h (adjustable)
Foam type : AFFF
Throw of range : >150m(water) / >85m(Foam )
Height of range :
Water : from the water level >80m (it's 20m from the nozzel of fire monitor to the level of water )
Foam: from the water level>50m (it's 20m from the nozzel of fire monitor to the level of water)
Inlet pressure : 1.3 Mpa
Operational type : motor driven fire monitor( 380VAC 3ph 50Hz) , with
Local hand operation
The electricity can be changed according to your requirement
Horizontal : +175°to -175°(with limited switch , it's adjustable )
Vertical : -45° to +75°
protection standard :IP56
The motor insulation class : F
Material :
Body : stainless steel 304
Pipe : stainless steel 304
Recoil: 27.0KN (Water) , 9.2KN (Foam)
Supplier: Electrical measurement and control, energy meter power, meter voltmeter, ampere meter Services: Looking for professional cooperators or distributors in energy management system and OEM
G7-H2 Wireless Temperature Sensor System
With G7 temperature wireless sensor and Base Station, you can start monitoring your premises environmental condition online.
Wireless sensor G7 transmits measurement to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus TCP protocol.
G7-Centre App receives data from Base Station over Internet or LAN.
G7 Client App for Windows10, iOS, Android displays and stores all the incoming data in computer/tablet/smartphone for data analysis. By monitoring and understanding how environmental changes, you can adjust your air conditioner or heater to save energy and money.
Applications
water pipes network real time monitoring - water in and out temperature
oil/gas pipes network, pump stations
underground water level real time monitoring
environmental monitoring system - wind/temperature//CO2/pressure
remote Industrial equipment monitoring
rural equipment monitoring e.g. power plant, antenna tower
measuring equipment data capture and report via Wi-Fi
food chain, storage, transport industry, building management
agricultural, farming, laboratory, medical industry
G7-T2 Wireless Temperature Sensor System
With G7 temperature wireless sensor and Base Station, you can start monitoring your premises environmental condition online.
Wireless sensor G7 transmits measurement to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus TCP protocol.
G7-Centre App receives data from Base Station over Internet or LAN.
G7 Client App for Windows10, iOS, Android displays and stores all the incoming data in computer/tablet/smartphone for data analysis. By monitoring and understanding how environmental changes, you can adjust your air conditioner or heater to save energy and money.
In the Package
1 x Base Station & RF Antenna
1 x AC/DC Adaptor
1 x Ethernet Cable
Up to 64 x Wireless Sensors in one single system
Applications
water pipes network real time monitoring - water in and out temperature
oil/gas pipes network, pump stations
underground water level real time monitoring
environmental monitoring system - wind/temperature//CO2/pressure
remote Industrial equipment monitoring
rural equipment monitoring e.g. power plant, antenna tower
measuring equipment data capture and report via Wi-Fi
food chain, storage, transport industry, building management
agricultural, farming, laboratory, medical industry
Details:
Model Number: ZW924
Max. Current:908.42MHz
Max. Voltage:120V
Mechanical Life:10 year
Product name: Smart Z-wave Switch
standard: Z-wave
Certificate: CE FCC
material: PC
Battery: CR2032 1
Logo:OEM available
Warranty:1 year
Features:S2 Remote Control Switch
S2 Remote Control Switch 700 Series Z-WAVE Plus Scene Controller Switch features:
1.Connect a 120 V light fixture to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available
2. Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter Away mode on your way out or to turn off all of the lights before you go to bed with a single click.
3. Works with regular 3-way switches or single pole switch as long as NEUTRAL is present.
4. This Z-Wave switch is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.
5.Z-Wave Range up to 200 feet line of sight (signal will be affected by obstacles and walls)
S281 LoRa gateway is data acquisition device based on Lora, 4G and Ethernet communication technologies. One LoRa gateway can collect data from 50 wireless Lora nodes, and the communication distance can reach 2000 meters. It is an optimal solution for data collection within the area. Lora nodes powered by low power three batteries, there are temperature, temperature and humidity sensors , RS485 nodes, DI nodes, DO nodes, various agricultural sensor nodes, etc. It is widely used in workshop temperature and humidity, equipment utilization rate, agriculture, breeding and other fields.
Supplier: Industrial process & control products like multi-function meter, lt current transformers, power quality analyzers, temperature controllers, electrical transducers, power supplies, energy meters, analog & digital panel meters, dc converters, temperature sensors, recorders, temperature and humidity monitor, ultrasonic level transducer, testing & measuring instruments, digital multimeters, ac/dc clamp meters, insulation testers, earth testers, power clamp meters Services: Export
