Pineapple is one of main exported fruit of nghi son. It is suited with alkaline soil but the taste and aroma, pineapple is often used as fresh, a beverage and food processing industry. Currently, the market is growing pineapples in the world. There are 3 varieties of pineapple to be grown in vietnam including: queen, cayen, md2, but queen pineapple is exported with largest quantity. It is suited in the market needs and nicest taste. Now pineapple farms have area of 100 ha, and we also league with farmers, buy their final products. Every month we have exported 20 containers over the world. There are iran, korea, russia, uae, singapore, japan, Fresh pineapple Code: pf1-ns Color: yellow& green Taste sweet: special taste and nice smell Style: queen, cayen, md2 Packing packing : 10 kg/carton, 9 tons/ cont 20, � or 18 tons/cont 40 rf Selected: carefully, cleaned, no scratched Temperature : 10oc 12oc, ventilation: 85 % - 90 % Certificate: healthy, phyto, haccp, iso, gap
Dried wood-ears Dried Wood Ear mushrooms have the appearance of black trumpet mushrooms, the often large mushroom appearing thin and frail, curled tightly into itself exposing its snowy underside against its black cap. When reconstituted, its colors blend together, turning it into a large wavy silvery black mushroom paddle nearly seven times the size of its dried form. CROP From September to March. SPECIFICATION Appearance wavy Color one side is black and the other side is white Flavor typical flavor of wood ear Foreign matter Non contaminated Moisture Below 13% SHAPE AND SIZE Shape Size Wood ear whole Diameter : 5cm up Wood ear slice Width : 2mm, 5mm Length : 2-4cm, 3-6cm Wood ear dice Cut-size : 1.0x1.0 (cm), 1.0x1.5 (cm), 1.5x1.5cm ORIGIN : Vietnam PACKING 5kgs/PE bag x 1 bag/carton or as customer's request STORAGE AND SHELF LIFE Storage: Keep in a cool, dry and clean place Protect from moisture and direct light Shelf Life: 1 year in normal temperature 2 years under 20oC
Star Anise The Latin name for the Star anise plant is Illicium verum.The fruit of the Star anise tree looks an eight to twelve pointed star. Star anise can either be used whole, and removed prior to serving the dish, or finely ground, and added with any other herbs and spices called for in a recipe. Purchase Star anise, either finely ground, or in its whole form from the grocery store. Whole Star anise seed pods, which are up to 1 1/4 inches across, can be ground in a coffee grinder, or by using a mortar and pestle. Our star anise is the best anise in the world which is grown in the northern provinces of Vietnam and Lang Son is the most famous one. Specification: Moisture 13,5% max Admixture 1% max No fungus, natural colour Flower size 2 cm up (80% min) Broken 10 % max Packing cartons (net10kg) Container capacity: 6.5MT/20FT; 16MT/40HQ Origin : Viet Nam Port of loading Hai Phong Port, Viet Nam
SALTED CHILI Information Salted chili is produced from fresh chili at the same day of harvesting. After harvesting, fresh chili is delivered immediately to the factory for salting in order to keep typical color and taste of chili. Chili is kept in tanks at least one month for salting before packing into wooden cases to export. CROP In Vietnam, we harvest chili from January to June PACKING Packing : 500kgs/big bag/wooden case Loading : 36 wooden cases/container 20DC VARIETY/ SPECIFICATION Our factory can supply wide range of chili varieties. SALTED SMALL HOT CHILI Length : 3.0-8.0cm Diameter : 0.5-1.5cm Salt ratio : 23% min SALTED GREEN LONG CHILI Length : 7.0-12.5cm Diameter : 1.5-3.0cm Salt ratio : 23% min SALTED RED LONG CHILI Length : 7.0-12.5cm Diameter : 1.5-3.0cm Salted ratio : 23% min SATED EXTRA-LONG CHILI Length : 15-20cm Diameter : 2.0-3.5cm Salt ratio : 23% min
CANNED LYNCHEE Produced from the best lychee areas of Vietnam as Thanh Ha, Luc Ngan, a speciality with geographical indications well-known worldwide. The lychee is grown and protected under VietGAP standard. The crop of lychee is very short: from June to July with its peak season in middle of June. The product is convenient for ready-to-eat. Sensory characteristic: + Appearance: White meat of lychee + Smell: Typical smell of natural lychee + Taste: Typical like lychee, slightly sweet, not mealy + Consistency: Tender to slightly firm Physical characteristic: + Calibre (pieces per can): + Discoloration: Max 1% + Damaged Max 5% + Foreign matter: None Chemical characteristic + pH value: 3.2-4.0 + Brix: 14-16% + Acidity: 0.2-0.6% Microbiological values: virtually sterilized, preserved by heat Other characteristic: + Shelf life: 2 years from production date + Storage: At room temperature for unopened, in the refrigerator for opened. + Packing: 24 cans/carton + Weight: NW: 565g, DW: 290g + Carton size: 260x345x238mm + Loading: 1300 cartons/container
PINEAPPLE PIECES Produced from fresh pineapples in Vietnam with 2 main varieties: Queen & Cayenne. The season of Queen from December until April with peak crop within March to April. The season of Cayenne from May to July with peak crop in June. The product is convenient for ready-to-eat. Health Benefits "Though Fresh Pineapple is best consumed for its nutritional benefits but canned ones are also relished equallyâ?� Sensory characteristic: + Appearance: Golden-yellow pineapples + Smell: Typical smell of natural pineapples + Taste: Typical like pineapples, slightly sweet, not mealy + Consistency: Slightly firm, virtually free of hard pieces (core) Physical characteristic: + Calibre (pieces per can): + Discoloration: Max 1% + Damaged Max 5% + Foreign matter: None Chemical characteristic + pH value: 3.2-4.0 + Brix: 14-16% + Acidity: 0.2-0.6% Microbiological values: virtually sterilized, preserved by heat Other characteristic: + Shelf life: 2 years from production date + Storage: At room temperature for unopened, in the refrigerator for opened. Packaging available: Tin can 20oz, 30oz, 108oz (A10) Logistics information: + Tin 20oz: 24 cans/carton, 1350 cartons/container + Tin 30oz: 24 cans/carton, 900 cartons/container + Tin 108oz: 6 cans/carton, 1080 cartons/container
An air preheater (APH) is a general term used to describe any device designed to heat air before another process (for example, combustion in a boiler) with the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil. Normal air preheater exist the problem of collection of ash,worn down,low temperature corrosion to effect the safe and economical operation for the boiler unit. So HTEG established the exclusive enamel research and development center to supply the complete solution and organize the scientific reserach personnel to tacle key problems and develop the new heat transfer parts-enameld tubes air preheater We have achieved ISO standard certificates as below: 1) Certificate of conformity of quality management system certification . 2) Environmental management system certificate 3) Occupational health and safety management system certificate 4)Installation, Alteration, Repair & Maintenance License of Special Equipment People's Republic of China Clients Visiting We have been reliable and steady supplier many domestic and overseas clients. We have exported products of economizer, membrane water wall, gas fired boiler etc to vietnam, mongolia, parkistan, indonesia these years and won great appraisal from clients for good price and finest quality.
Customer oriented state of the art technology industrial membrane water wall Producrt Description customer oriented state of the art technology industrial membrane water wall are membrane walls that are made of tubes welded together with or without a strip of metal in between. These walls form the enclosure of the coal combustion chamber. Water wall tubes are also referred to as the evaporator section; they contain water mostly in liquid form which gradually evaporates as it rises in the boiler. Application state of the art technology heat pressure boiler parts membrane water wall are membrane walls that are made of tubes welded together with or without a strip of metal in between. These walls form the enclosure of the coal combustion chamber. Water wall tubes are also referred to as the evaporator section; they contain water mostly in liquid form which gradually evaporates as it rises in the boiler. Client Visiting We have been reliable and steady supplier many domestic and overseas clients. We have exported products of economizer, membrane water wall, gas fired boiler etc to vietnam, mongolia, parkistan, indonesia these years and won great appraisal from clients for good price and finest quality. Feel free to contact me as below: mail: jmy@hengtao.cn whatsapp;86 13853692436
Run-resistant Panty hose We have dedicated our 30 years to Panty hose business in Japan. We supplied Panty hose made in Japan to Retailer, Whole Seller and Mail Order Seller etc. in Japan and also exported Panty hose made in Japan to Hong Kong, U.S.A., S. Korea and Vietnam. Meanwhile we supplied Panty hose made in China to Japanese customers after import from Chinese factory directly. We are able to respond to your any kinds of questions and demands from our experience. Please leave Japanese Panty hose to us. A new item of Panty hose, produced with Run-Resistant Nylon/Spandex yarn that newly developed by Japanese Yarn Maker, is characterized by Run-Proof effect. Knitting structure is a plain as usual Panty hose (not mesh type). If you puncture on this kind of Panty hose, you can see Hole but No Run. We are confident that this article is nice and new in your market. Please kindly contact to us if you are interested in!
An offshore steel IS 2062 Grade B paperboard we offer has been recognized by customerâ??s altogether walks of life, from key companies like sugar, paper, textiles, dairy products, engineering to a better level of personalization. Industries like oil, gas , petrochemical, chemical and fertilizer, electrical power and atomic energy are unstoppable. Sai Steel & Engineering Co. features a wide selection of requirements for offshore steel IS 2062 for the B-level printing plate. Lower costs and better partnerships. Therefore, our checking accounts are currently located in several countries/regions like Saudi Arabia , Kuwait, Qatar, Oman, Yemen then on. , United Arab Emirates, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa , South America, Brazil, India, Australia, Egypt. We are very happy together with your inquiry. We provide high-quality studio-grade IS 2062 records at reasonable prices. These IS 2062 Class B blades are made from the very best quality materials available to make sure overall quality. As listed by Sai Steel & Engineering Co., these IS 2062 Class B boards are suitable for the dimensions and thickness of the violin. because of experienced professionals and qualified personnel, and therefore the use of the newest modern equipment, IS 2062 high-quality blades and Profile B customers from everywhere the planet are provided, in order that they are unparalleled. Since all offshore steel IS 2062 grade B blades are available, they will be dig certain sizes and shapes to point out the inspiration of their creation and contours. All work is performed using our quality system, which is seamlessly verified and isn't prohibited. Your check is reliable. Like all our suppliers, the very best quality steel manufacturer on the earth has been tested and rated at our meetings. What is IS 2062 Grade B Plate ? Standard:EN 10025: 2004 Specification This standard was some time back known asIS 226. Eventually IS 2062 has supplanted this specification.This review is for"Steel for general assistant purposes". Assistant steel fabricated by Sai Steel & Engineering Co. all the quality parameters of this standard to Grade A. This level is also usually known as IS 2062 â?? GRE 250(Fe â?? 410 â?? W)A, altogether, particulars of this review Fe gllow An are as under. IS 2062 Grade B Plate Grade and Specification Thickness:1.5mm-200mm Width:900-2500mm or 1000,1050,1250,1500,1800,2000mm Length: 2-12m or as customersâ?? special requirements; Grade of hot rolled steel plate: SS400, ASTM A36,A572,ST37,ST52,Q195, Q215, Q235,Q345,S235JR,S355JR,S45C, S50C Standard:EN 10025-2:2004 Export To:Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt.
Coconut Cooking Oil, Virgin Coconut Oil (Vco), Coconut Dc, Coconut Sugar, Nata De Coco, Coconut Bristle, Coconut Fiber, Coco Peat, Coconut Briquette..
Lobster, salmon, vannamei, tiger prawn, all kinds of rice, broken rice, fresh coconut, almond nut, beech nut, cashew nut, hazelnut, walnut, fresh organic honey, corn oil, coconut oil, sunflower oil, canola oil, eseential oils black and white pepper, turmeric, wheat, millet, sorghum, cumin seeds, cardamom, green chilli powder, red chilli, cloves, red chilli powder, back pepper powder, garlic, paste, powder, bay leaf, black cumin black cardamom, saffron, fenugreek, crushed maize, chile, mustard seed, corn flakes, cereal, rice bran oil, pasta, peanut butter, rice, and vegetable, corn starch, beet sugar pulp, soya bean seed, white kidney beans, lentil, gluten free wheat flour, groundnut, cardamom, t-shirts, bath towels, towels, leather hand bags, wallets, belts, jackets, antique items, coir, granite.
Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data :- COLOUR :- Yellow FINISH :- Matt SOLIDS BY VOLUME :- 40 �± 3% THEORETICAL SPREADING RATE :- 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT :- Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) :- SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE :- BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data MIXING RATIO :- Base : Hardener (As per our recommendation) APPLICATION :- By Brush / By Conventional Spray THINNER :- Type 290 POT LIFE :- 3 hours min at 30�° C RECOMMENDED DFT :- 30-40 �µ. OVERCOATING INTERVAL :- MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY :- Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Add Thinner Type 290 into the mix, if required, depending on application method, and stir gently for few minutes. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Strain the paint through Nylon filter cloth of 200 mesh size and apply uniformly over the surface. All equipments used for above should be properly clean. Application :- By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner and ensuring the uniform application. Use quality brushes for paint application. For Conventional Spray application :- Thinner : Type 290 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 p.s.i. For Airless Spray application :- Thinner : Type 290 Addition : Max 5% Nozzle Orifice : 0.28- 0.37 mm Nozzle Pressure : 1400-1800 p.s.i.
Description Two component Epoxy based anticorrosive primer containing red oxide and zinc phosphate as corrosion inhibiting pigments Recommended Use :- This product is recommended as a primer on suitably cleaned mild steel surface in various fertilizer units, refineries, chemical and other plants, transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc. The product is recommended as a primer for mild to moderate corrosion conditions. Not to be recommended for immersed water condition. Physical Data :- COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 ± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at DFT of 30 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy Thinner 190 POT LIFE : 4 hours min at 30C RECOMMENDED DFT : 30 - 40 OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated Rubber and Synthetic Enamel Finish Paints. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix, gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. Add Epoxy Thinner Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth and apply uniformly over the surface. All equipments used for above should be properly clean. For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 p.s.i. For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : Max 5% if required Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 p.s.i.
ABB 64750097 IP54 RH35M-4EK Oiler 45 M10x1 KG80-20 MCS7 Ex d fixed camera station MD TOTCO INTRINCALLY SAFE MODEM 219916 https://www.amlppmfg.com/circlip-for-shaft-70-w05293070-sand-pump-sb6x8fj.html PLDP-A DEG engine model NTA-855-G4 ESN 25325738 GH3101-27.03.00Air bag 4801010140 Chain 24SAX122 122section Sealing ring for hydraulic wrench TQ340/35YA TQ340-165 Solenoid valve DSG-0-3C4-A200-70 YUKEN Screw M12x25 KG80-19 Guide ring KG80-15 Bearing NB800G.04.17 Guide LGF3101-05.12G Loadmaster Spring 7'' 9360007 Voltage sensor NPGL-CX5D 275-2604 Engine oil filter XB8 0.5 Joule Xenon - Exia (Intrinsically Safe), Weatherproof ZPEC ZM107.03.62.00 LINER 6-1/2" WITH LINER SEAL POLYPAK S03-1019-010 Packing 60BG26 GH3161-05.27 G on ZJ-50/315 DB19 valve guide GUIDE 125128 Block booster station QWS-2500 pump standard : according to technical task harting connector 9330102616 LEVER FOR VALVE 10" 24230001 Crown block roller P1000529AA for XJ-450S THE FLOW TIME DELAY RELAY FPTB180 Transfer cylinder 02-00M Adjusting nut BG75B-16 SEAT 1786031 Current sensor JA866-3I XP40-Ti Explosion Protected Thermal Imaging PTZ Camera Stations Intermediate relay DRM570730LT 51403014007 Control valve for gear shiftHNR-R431003806 Valve four X X single hydraulic Z07060400005AA Cover 1468.032.000-07 Oil scraper ring for reciprocating engine QB7400.9.00-2005 Central gear 56.321.02/56.321.00 STUDNUT, PN.H13-1035-01A Clamp RS11309.05.04.00 SPTA pump F1300 Piston Application: safety valve SIN25.100 according to tech task Material: rubber Rubber ram core 5" DFZ1310-01A-01-00 GH3101-05.03Stick, liner cover Weatherproof Signalling Hooter HPW12 Draw-work control handle BVV81B3KM-03ZP-X O-ring kit 143 03734279 harting HAN15D09200100321 Lock spring washer 29540988 Valve spring RGF1000-05.16 3906 BLOCK,TERMINAL,WK 4/U,600V,40A 77992-1080 Potting Compound Metal Seal 6-5/8". THERMOMETER, PN.N14-1000-020 Sealing ring AN33001-04.06A M/D TOTCO connector J10900A-20\308240 GFD(S)D760/90-1000 Top Blowing Fan RGS4/100A FUSE FSYT-2 fully sealed integrated camera Gear small 21 teeth ZP275-20.01 Cotter pin 2x14 for hydraulic key ZQ 203/100 ZQ203-105 Support bearing pad 533X9TC33B BZ000005-V-belt 4ZV25J-7620 CHECK VALVE 90251000 08MK650 346-8340 Hydraulic tank breather Seal 0766945 Weatherfor MOTOT YS-550W-4P Fan YDK600-8AA 600W 380V 2.1A Fuel water separator Filter 20998367 Cooling Fan X45.25 No for Kiln Shell LOWER RING ASSY 350 E028650 "Panel View Plus Logic Module 24VDC, CAT:2711P-RP9DK, Make: Allen Bradley, USA" Weatherproof Signalling Bell UWE 321-4686 breather
GCL Drum Gear Coupling Suitable for connecting two horizontal coaxial axis drive shaft system, with a certain Angle to compensate the relative offset performance of two shafts drum tooth coupling, working environment temperature -20 ~ +80C, transmission nominal torque is 0. 4-4500KN-m  WGP  Brake Wheel Drum Gear  Coupling Type Nominal Torque� TnKNã?»m Allowable Speed  [n] r/mi n Shaft Hole Diameter d dz mm Shaft Hole Length L % D D, d2 B N C C, c2 Inertia Moment kg m~ Weight� kg Y J, Z, WGP1 0. 71 4000 12 -42 32 -112 315 122 98 60 58 38 3/30 19/29 12/18 0. 008 5.7 WGP2 1.25 4000 22 -56 52 -112 315 150 118 77 68 38 3/20 23/29 16 0. 02 10 WGP3 2.5 3550 22 -63 52 -142 355 170 140 90 80 49 3/33 23/36 16/25 0. 05 17 WGP4 4.5 2500 30 -80 82 -172 400450500 200 160 112 90 45 3/13 29/41 17 0. 1 26 WGP5 7. 1 2500 30 -90 82 -172 225 180 128 100 45 3/23 29/41 19 0. 17 35 WGP6 10 2000 32 -100 82 -212 560630710 245 200 145 112 44 5/35 28/48 20 0.3 52 WGP7 14 1700 32 -110 82 -212 560630710 272 230 160 122 44 5/45 38/48 20 0.5 68 WGP8 20 1700 55 -125 107-212 560630710 290 245 176 136 44 5/29 38/48 20/34 0.7 80 WGP9 25 1600 65 -140 107-252 630710800 315 265 190 140 58 5 38/53 28/38 1 107 WGP10 40 1600 75 -160 132-302 630710800 355 300 225 165 58 5/28 43/63 20/38 1.8 160 WGP11 56 1400 80 -180 167-302 710� 800� 900 412 345 256 180 58 8/15 51/66 32 3.7 215 WGP12 80 1400 120-200 167-352 710� 800� 900 440 375 288 207 58 8 51/76 32/45 6.4 305 WGP13 112 1400 140-220 202-352 800900 490 425 320 235 58 8 56/76 32/38 11 395 WGP14 160 1200 160-260 242-410 9001000 545 462 362 265 65 10 68/78 10/32 18 530 Note: 1. The weight and moment of inertia in the table are not calculated for the brake disc, and their values are shown in Table 2. 2. how to make green sand for aluminum casting , aluminum casting ideas , aluminum casting ingots , aluminum casting impregnation , aluminum casting in plaster , aluminum cast iron , aluminum cast iron pot , aluminum cast iron patio furniture , aluminum cast iron molds , aluminum cast in sand
300w led grow light300w Led grow light belongs to the EJ-SZD series.It is warm populared as same series EJ-SZD 600,EJ-SZD 1000. This item is designed according to plant growing principle of requirement for colorful sunshine.300W Led grow light suite for any growing period,especially have a good influence for water solution culture and soil culture.This 300w led grow light is widly used in indoor garden,potted flowers,gardening,seeding,plant breeding,spray farm planted,greenhouse cultivation,flower breeding etc. Led grow light specificationItemEJ-SZD 300EJ-SZD 600EJ-SZD 1000Power300W (60*5W)600W (120*5W)1000W (200*5W)Size310*210*65mm412*268*65mm510*280*65mmHPS/HID Replace500 W1000 W1500 WLED Brand5 W Epiled and EpistarPower Consume130 W+-5W260 W+-5W400 W +-5WMax coverage at 18"height45"*35"60"*54"100"*90"Core coverage at 18" height36"*24"45"*36"90"*85"PPFD@8"925.3 Umol1746.5 Umol2230.5 UmolInput VoltageAC85-265 VAC85-265 VAC85-265 VG.W.3.5KGS5.6KGS7.6KGSLifespan50,000 Hours50,000 Hours50,000 HoursWork frequency50/60Hz50/60Hz50/60HzColor spectrumFull spectrumFull spectrumFull spectrumLumen6000lm12000lm18000lmHeight above plants0.5-1m0.9-1.5m0.9-3.0mBest lighting time per day10-16 Hours10-16 Hours10-16 HoursPlugUS/EU/AU/UK/CL/BRWide bram angle90 degreeCertificationCE ROHS FCC LED grow light features* Excellent quality LED chips,lifespan over 50000 hours.* Replace HPS lamp of 3-5 times power,it can save more than 80% electricity than traditional HPS & HID lamps.* High luminous efficiency,more than 90% will be absorbed by hydrophyte,but traditional HPS and HID lamps only 8%-10%* The inside air circulation system is well designed to solve the problem of radiator.* Unique self-checking system,a led chip only matching one stable voltage diode,so once there is one led chip doesnâ??t work,no infulence for others,which remind the user to change the bad chip.* Input voltage AC85-265V which is suitable for the votalge all the world.Inner driver,no other equipments allocation so the led grow light can work once connect the plug.* The lighting area is changing base on the different plants and environments,also the technical parameters will be changed.* All the materials used in led grow lights are qualified the environmental requirements,none mercury,lead and other harmful heavy metal materials.* LED wavelength can be customed.The regular red wavelength is 630-660nm,blue wavelength is 440-470nm.The red promotes plants sprouting,blooming,fruiting;The blue is promoting the growing,rooting,and frondesce.
300w led grow light300w Led grow light belongs to the EJ-SZD series.It is warm populared as same series EJ-SZD 600,EJ-SZD 1000. This item is designed according to plant growing principle of requirement for colorful sunshine.300W Led grow light suite for any growing period,especially have a good influence for water solution culture and soil culture.This 300w led grow light is widly used in indoor garden,potted flowers,gardening,seeding,plant breeding,spray farm planted,greenhouse cultivation,flower breeding etc. Led grow light specificationItemEJ-SZD 300EJ-SZD 600EJ-SZD 1000Power300W (60*5W)600W (120*5W)1000W (200*5W)Size310*210*65mm412*268*65mm510*280*65mmHPS/HID Replace500 W1000 W1500 WLED Brand5 W Epiled and EpistarPower Consume130 W+-5W260 W+-5W400 W +-5WMax coverage at 18"height45"*35"60"*54"100"*90"Core coverage at 18" height36"*24"45"*36"90"*85"PPFD@8"925.3 Umol1746.5 Umol2230.5 UmolInput VoltageAC85-265 VAC85-265 VAC85-265 VG.W.3.5KGS5.6KGS7.6KGSLifespan50,000 Hours50,000 Hours50,000 HoursWork frequency50/60Hz50/60Hz50/60HzColor spectrumFull spectrumFull spectrumFull spectrumLumen6000lm12000lm18000lmHeight above plants0.5-1m0.9-1.5m0.9-3.0mBest lighting time per day10-16 Hours10-16 Hours10-16 HoursPlugUS/EU/AU/UK/CL/BRWide bram angle90 degreeCertificationCE ROHS FCC LED grow light features* Excellent quality LED chips,lifespan over 50000 hours.* Replace HPS lamp of 3-5 times power,it can save more than 80% electricity than traditional HPS & HID lamps.* High luminous efficiency,more than 90% will be absorbed by hydrophyte,but traditional HPS and HID lamps only 8%-10%* The inside air circulation system is well designed to solve the problem of radiator.* Unique self-checking system,a led chip only matching one stable voltage diode,so once there is one led chip doesnâ??t work,no infulence for others,which remind the user to change the bad chip.* Input voltage AC85-265V which is suitable for the votalge all the world.Inner driver,no other equipments allocation so the led grow light can work once connect the plug.* The lighting area is changing base on the different plants and environments,also the technical parameters will be changed.* All the materials used in led grow lights are qualified the environmental requirements,none mercury,lead and other harmful heavy metal materials.* LED wavelength can be customed.The regular red wavelength is 630-660nm,blue wavelength is 440-470nm.The red promotes plants sprouting,blooming,fruiting;The blue is promoting the growing,rooting,and frondesce.
300w led grow light300w Led grow light belongs to the EJ-SZD series.It is warm populared as same series EJ-SZD 600,WebsiteEJ-SZD 1000. This item is designed according to plant growing principle of requirement for colorful sunshine.300W Led grow light suite for any growing period,especially have a good influence for water solution culture and soil culture.This 300w led grow light is widly used in indoor garden,potted flowers,gardening,seeding,plant breeding,spray farm planted,greenhouse cultivation,flower breeding etc. Led grow light specificationItemEJ-SZD 300EJ-SZD 600EJ-SZD 1000Power300W (60*5W)600W (120*5W)1000W (200*5W)Size310*210*65mm412*268*65mm510*280*65mmHPS/HID Replace500 W1000 W1500 WLED Brand5 W Epiled and EpistarPower Consume130 W+-5W260 W+-5W400 W +-5WMax coverage at 18"height45"*35"60"*54"100"*90"Core coverage at 18" height36"*24"45"*36"90"*85"PPFD@8"925.3 Umol1746.5 Umol2230.5 UmolInput VoltageAC85-265 VAC85-265 VAC85-265 VG.W.3.5KGS5.6KGS7.6KGSLifespan50,000 Hours50,000 Hours50,000 HoursWork frequency50/60Hz50/60Hz50/60HzColor spectrumFull spectrumFull spectrumFull spectrumLumen6000lm12000lm18000lmHeight above plants0.5-1m0.9-1.5m0.9-3.0mBest lighting time per day10-16 Hours10-16 Hours10-16 HoursPlugUS/EU/AU/UK/CL/BRWide bram angle90 degreeCertificationCE ROHS FCC LED grow light features* Excellent quality LED chips,lifespan over 50000 hours.* Replace HPS lamp of 3-5 times power,it can save more than 80% electricity than traditional HPS & HID lamps.* High luminous efficiency,more than 90% will be absorbed by hydrophyte,but traditional HPS and HID lamps only 8%-10%* The inside air circulation system is well designed to solve the problem of radiator.* Unique self-checking system,a led chip only matching one stable voltage diode,so once there is one led chip doesnâ??t work,no infulence for others,which remind the user to change the bad chip.* Input voltage AC85-265V which is suitable for the votalge all the world.Inner driver,no other equipments allocation so the led grow light can work once connect the plug.* The lighting area is changing base on the different plants and environments,also the technical parameters will be changed.* All the materials used in led grow lights are qualified the environmental requirements,none mercury,lead and other harmful heavy metal materials.* LED wavelength can be customed.The regular red wavelength is 630-660nm,blue wavelength is 440-470nm.The red promotes plants sprouting,blooming,fruiting;The blue is promoting the growing,rooting,and frondesce.
300w led grow light300w Led grow light belongs to the EJ-SZD series.It is warm populared as same series EJ-SZD 600,EJ-SZD 1000. This item is designed according to plant growing principle of requirement for colorful sunshine.300W Led grow light suite for any growing period,especially have a good influence for water solution culture and soil culture.This 300w led grow light is widly used in indoor garden,potted flowers,gardening,seeding,plant breeding,spray farm planted,greenhouse cultivation,flower breeding etc. Led grow light specificationItemEJ-SZD 300EJ-SZD 600EJ-SZD 1000Power300W (60*5W)600W (120*5W)1000W (200*5W)Size310*210*65mm412*268*65mm510*280*65mmHPS/HID Replace500 W1000 W1500 WLED Brand5 W Epiled and EpistarPower Consume130 W+-5W260 W+-5W400 W +-5WMax coverage at 18"height45"*35"60"*54"100"*90"Core coverage at 18" height36"*24"45"*36"90"*85"PPFD@8"925.3 Umol1746.5 Umol2230.5 UmolInput VoltageAC85-265 VAC85-265 VAC85-265 VG.W.3.5KGS5.6KGS7.6KGSLifespan50,000 Hours50,000 Hours50,000 HoursWork frequency50/60Hz50/60Hz50/60HzColor spectrumFull spectrumFull spectrumFull spectrumLumen6000lm12000lm18000lmHeight above plants0.5-1m0.9-1.5m0.9-3.0mBest lighting time per day10-16 Hours10-16 Hours10-16 HoursPlugUS/EU/AU/UK/CL/BRWide bram angle90 degreeCertificationCE ROHS FCC LED grow light features* Excellent quality LED chips,lifespan over 50000 hours.* Replace HPS lamp of 3-5 times power,it can save more than 80% electricity than traditional HPS & HID lamps.* High luminous efficiency,more than 90% will be absorbed by hydrophyte,but traditional HPS and HID lamps only 8%-10%* The inside air circulation system is well designed to solve the problem of radiator.* Unique self-checking system,a led chip only matching one stable voltage diode,so once there is one led chip doesnâ??t work,no infulence for others,which remind the user to change the bad chip.* Input voltage AC85-265V which is suitable for the votalge all the world.Inner driver,no other equipments allocation so the led grow light can work once connect the plug.* The lighting area is changing base on the different plants and environments,also the technical parameters will be changed.* All the materials used in led grow lights are qualified the environmental requirements,none mercury,lead and other harmful heavy metal materials.* LED wavelength can be customed.The regular red wavelength is 630-660nm,blue wavelength is 440-470nm.The red promotes plants sprouting,blooming,fruiting;The blue is promoting the growing,rooting,and frondesce.
