These reliable pasta cookers are used by chefs to cook fresh or dry pasta, as well rice, vegetables, potatoes, and seafoods or just to rethermalize. This self-contained cooking system eliminates the dangerous handling of heavy pots containing boiling water. As an option, solid pans can be inserted into the cooking chamber to hold sauces. Standard features: All heavy-duty stainless steel construction meeting nsf requirements One piece deep drawn inner tank #316 stainless for ease of maintenance Inner tank is corrosion-proof from the effects of salt water Piezo-electric ignition Safety thermostat Overflow area safeguards against accident overfill High efficiency burner technology concentrates greater heat at the rear creating a convective flow of water eliminating the need for stirring which shortens cook times Energy and time saving mechanism Cooking time: 5-10 min. Standard accessories: Gas injector nozzles provided to switch from natural gas to lp gas Batter plate 6 adjustable stainless steel legs Rear gas connection Manual gas shut-off valve High capacity overflow drain 1 full port drain valve Water inlet Df-rm-9 Dimension: 700 x 750 x 760 + 120 mm power: 16 kw n/w: 82 kg Js-rm-12 Dimension: 800 x 900 x 850 + 120 mm power: 16 kw n/w: 100 kg Js-tm-12 Dimension: 800 x 900 x 850 + 120 mm power: 12 kw n/w: 75 kg voltage: 380 v
Product Name: JWS-Hot Water Thermometers Model Number: JWS-11 / JWS-12 Supply Ability: 5,000 pcs/month Plastic shell submarine thermometer, straight form (JWS-11). Plastic shell submarine thermometer, 90íp angle form (JWS-12). White V-shaped aluminum scale panel. Gray thermoplastic resin shuck. Glass face (window) to exclude dirt and dust. Triangular red reading liquid filled tube. Lower part: Fixed connected with thread, made in copper, length: 43mm - 100 mm. Connect pipe thread: 3/4", 1/2". Dual scale extent of survey: -40C - 200C / -40ípF - 400ípF. Packing: 1 pc/paper box(depending on practical size) Conveyance: Packed in corrugated carton Size: 51 x 40 x 28cm
Applicable fibers SM MM DS NZDS Fiber cleaved length 8-16mm (Coating diameter: 250¦Ìm) Fiber diameter Cladding diameter: 80-150¦Ìm Coating diameter: 100-1000¦Ìm Fiber Count Single Splicing mode Auto Calibrate Normal Special Fiber aligning method Core aligning¡¢clad aligning¡¢manual aligning Image processing method Digital Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Typical splicing time 9 sec (standard SM fiber) Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss £¾60dB Storage of splice result 4000 results, 20 parameter per result Fiber magnification 300X (X or Y view) 150X (X and Y view) Tube typical heating time 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Adjustable Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2N Electrode life 2500 No. of splice/heating with battery Typical 160 cycles (splice/tube heat with inner Li-battery) Display screen 5.6 inch TFT color LCD monitor Image change over The fiber image can be turned upside down Terminal USB 1.1 and VGA Operating condition 0-5000m above sea level,0-95%RH and -10-50¡ãrespectively, Max wind velocity of 15m/s Power supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Dimension 150mm(L)¡Á150mm(W)¡Á150mm(H) Weight 2.7Kg excluding battery, 3.2Kg including battery. Plastic bag outside,strong foams inside.
4. Centrifugal tubes (each containing 180 ¦ìl of assay buffer) 5. Product manual Test procedure 1. Do centrifugation to cattle¡¯s whole blood sample to collect serum or plasma for use. 2. Use small pipette with reticle to transfer 20 ¦ìl (upper reticle) of serum or plasma into the centrifugal tube with assay buffer. Mix them well by the pipette attached in the pouch. 3. Take out the cassette from the foil pouch and place it horizontally. 4. Drip 3 drops (about 100 ¦ìl) of sample mixture into the sample hole. 5. Interpret the result in 5-10 minutes. Result after 10 minutes is considered as invalid. Interpretation of results Positive: the presence of both c band and t band, no matter t band is clear or vague. Negative: only clear c band appears. Invalid: no colored band appears in c zone, no matter whether t band appears. Storage The kit can be stored at room temperature (2-30¡ãc). The test kit is stable through the expiration date (18 months) marked on the foil pouch. Do not freeze. Do not store the test kit in direct sunlight. Precaution 1. For best results, please strictly adhere to these instructions. 2. All reagents must be at room temperature before running the assay. 3. Do not remove test cassette from its pouch until immediately before use. 4. Do not reuse the test kit. 5. Do not use the test beyond its expiration date marked on the foil pouch. 6. The components in this kit have been quality control tested as standard batch unit. Do not mix components from different lot numbers. Limitation Bovine tuberculosis ab rapid test is for in vitro veterinary diagnosis use only. All results should be considered with other clinical information available from veterinarian. For an accurate result, it is suggested to apply other method such as elisa for final determination in practice. In house standard
Fusion splicer pt-650 Features Equel to fujikura fsm-50s, sumitomo type-37 etc Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interfac Specefication Model Pt-650 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500
PEBBLE4 Single Side Printing Detailed Description Print Method: Single side Printing Print Speed: Color (YMCKO): 150 cards/hour Monochrome: Up to 1000 cards/hour Resolution 300 dpi print head (11.8 dots/mm) Memory: 16 MB RAM Software driver: Windows XP, 2003 and Vista, 32 & 64 bits Mac OS X v10.2, 10.3 and 10.4 Linux Communication Interface: USB (Cable supplied) - Option for Ethernet TCP-IP4 Print Area: ISO CR-80 - ISO 7810 (53.98 mm x 85.60 mm - 3.375" x 2.125") ISO CR-79 (52, 10 mm x 83, 90 mm - 3.303" x 2.051") option Accepted card Specification: 0.25mm-1mm Input hopper card capacity: 100 cards(0.76mm/30mil thickness) Output hopper card capacity: 50 cards(0.76mm/30mil thickness) Ribbon Options: YMCKO(200 prints), Resin K(1000 prints) Supply Voltage: 110~240VAC Supply Frequency: 50Hz~60Hz Operating Temperature: 15to 30 degree Operating Humidity: 20~70% non-condensing Encoding Options: HICO, LOCO Mag card encoder ISO 7811 Contact IC encoder Contactless IC encoder. Dimensions & Weight: 237mm(W)/447mm(L)/192mm(H); 5.9kg
Detailed product description The advanced paper feeding mechanism ensures high-speed running as well as stable and reliable performance. The imported italian pneumatic clutch and brake provides fast reaction, stability and reliability. High-accuracy intermittent mechanism (made in taiwan) ensures positional accuracy and stability. The loading/unloading paper mechanism improves production efficiency as it can be used without shutting the machine down. The use of the advanced electrical system ensures stability and reliability. Automatic adjustment of the measurement, leveling and pressure systems is also provided. The double-piece detection device uses a unique intelligent non-adjustment system. Main technical parameters: Mw1100: 1) max paper size (mm): 1, 100 x 800 2) min paper size (mm): 550 x 400 3) min paper notch: 5mm 4) max pressure (mt): 300 5) max paper thickness (mm): 0.2-1.5 6) max speed (s/h): 7, 000 7) main motor (kw): 15 8) average power consumption (kw): 20 9) gross weight (t): 18 Mw1050: 1) max paper size (mm): 1, 050 x 750 2) min paper size (mm): 450 x 370 3) min paper notch: 8mm 4) max pressure (mt): 300 5) max paper thickness (mm): 0.2-1.5 6) max speed (s/h): 7, 000 7) main motor (kw): 15 8) average power consumption (kw): 20 9) gross weight (t): 16 Ditto
Dry Red onion flakes Botanical Name: Allium cepa Family: Allium Forms: Dehydrated --Flakes Variety: Red Description: Dehydrated red onion flakes Onion is one of the oldest vegetables that utilize in preparing a variety of food dishes as an ingredient. Due to the perishable nature, Onion is dehydrated to prolonge its life. India is one of the pioneers in offering Dehydrated onions. Currently, India holds a 90% supplies the world's dehydrated onion demand. India is offering basic three variants of the dehydrated onion based on the raw material used in the dehydration process Red Onion. Among the available raw material, dehydrated red onion and its products (such as Flakes, Chopped, Minced, Granules and powder) are widely demanded by the world's community due to its sweater and mild spices taste. Product name : Red Onion Flakes Size : 5 - 16 mm Quality : Premium Grade, A - Grade Aroma : Typical fresh Onion Self-Life : 2 Years Uses/Applications: Dehydrated Onions are used in various food preparations, salads, canned soups, sauces, gravies, blends, hamburgers, pizzas, Specialty fast food preparations, Meat products, seasonings, and healthcare related industries Uses Medical: 1. Helpful in low blood pressure problem 2. Powerful anti-cancer agent 3. Presence of chromium helps in regulating blood sugar 4. Carbohydrates may causes gas and bloating Chemical Analysis: Specifications : White Onion Chopped, Moisture content : 6 % (± 0.5 %) max Hot water insoluble : 20 % (± 1 %) max Ash content : 4 % (± 0.4 %) max Acid insoluble ash : 0.5% (± 0.05 %) max Major defects : 1% (± 0.05 %) max Microbiological analysis: Specifications : Red Onion Flakes Total Plate Count (TPC) : < 300,000 / GM Coliform Germs : 100 / GM E- Coli : NIL Yeast & Molds : 1000 / GM Salmonella : NIL / 25 GM Bacillus Cereus : 100 / GM Staphylococcus Aureus : 100 / GM
White Onion Flakes Botanical Name: Allium cepa Family: Allium Forms: Dehydrated --Flakes (Kibbled) Variety: Red Description: DEHYDRATED WHITE ONION FLAKES The dehydrated product is available as kibbled, sliced, rings, minced, chopped, granulated, and powder forms. Dehydrated products are used when the fresh ingredient is not available. It has a strong odor and a long shelf life. Product name : White Onion Size : 8 - 16 mm Quality : Premium Grade, A - Grade Aroma : Typical fresh Onion Self-Life : 2 Years in 10â??c Storage Uses/Applications: Dehydrated Onions are used in various food preparations, salads, canned soups, sauces, gravies, blends, hamburgers, pizzas, Specialty fast food preparations, Meat products, seasonings, and healthcare related industries Uses Medical: 1. Helpful in low blood pressure problem 2. Powerful anti-cancer agent 3. Presence of chromium helps in regulating blood sugar 4. Carbohydrates may causes gas and bloating Chemical Analysis: Specifications : White Onion Flakes Moisture content : 6 % (± 0.5 %) max Hot water insoluble : 20 % (± 1 %) max Ash content : 4 % (± 0.4 %) max Acid insoluble ash : 0.5% (± 0.05 %) max Major defects : 1% (± 0.05 %) max Microbiological analysis: Specifications : Onion White Flakes Total Plate Count (TPC) : 300,000 / GM Coliform Germs : 100 / GM E- Coli : NIL Yeast & Molds : 1000 / GM Salmonella : NIL / 25 GM Bacillus Cereus : 100 / GM Staphylococcus Aureus : 100 / GM
Dry Red onion flakes Botanical Name: Allium cepa Family: Allium Forms: Dehydrated --Flakes Variety: Red Description: DEHYDRATED RED ONION FLAKES Onion is one of the oldest vegetables that utilize in preparing a variety of food dishes as an ingredient. Due to the perishable nature, Onion is dehydrated to prolonge its life. India is one of the pioneers in offering Dehydrated onions. Currently, India holds a 90% supplies the worldâ??s dehydrated onion demand. India is offering basic three variants of the dehydrated onion based on the raw material used in the dehydration process Red Onion. Among the available raw material, dehydrated red onion and its products (such as Flakes, Chopped, Minced, Granules and powder) are widely demanded by the worldâ??s community due to its sweater and mild spices taste. Product name : Red Onion Flakes Size : 5 - 16 mm Quality : Premium Grade, A - Grade Aroma : Typical fresh Onion Self-Life : 2 Years Uses/Applications: Dehydrated Onions are used in various food preparations, salads, canned soups, sauces, gravies, blends, hamburgers, pizzas, Specialty fast food preparations, Meat products, seasonings, and healthcare related industries Uses Medical: 1. Helpful in low blood pressure problem 2. Powerful anti-cancer agent 3. Presence of chromium helps in regulating blood sugar 4. Carbohydrates may causes gas and bloating Chemical Analysis: Specifications : White Onion Chopped, Moisture content : 6 % (Ã?± 0.5 %) max Hot water insoluble : 20 % (Ã?± 1 %) max Ash content : 4 % (Ã?± 0.4 %) max Acid insoluble ash : 0.5% (Ã?± 0.05 %) max Major defects : 1% (Ã?± 0.05 %) max Microbiological analysis: Specifications : Red Onion Flakes Total Plate Count (TPC) : < 300,000 / GM Coliform Germs : 100 / GM E- Coli : NIL Yeast & Molds : 1000 / GM Salmonella : NIL / 25 GM Bacillus Cereus : 100 / GM Staphylococcus Aureus : 100 / GM
Fusion splicer pt-660 Features Color lcd monitor and 256x magnification Compact and lightweight Reversible monitor with control panel on each side Maximum wind velocity: 15m/s 8sec splice time, 40sec tube-heat time Simultaneous x and y views Large capacity internal battery System test: ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8, 000 groups of splice results Multiple language options Specification Model Pt-660 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 8 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 8(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Usb 1.1 and vga Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 170mm(l) x170mm (w) x140mm (h) Weight 2.7 kg excluding battery, 3.3 kg including battery
Features Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto check quality of , cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Specifications ModelKl-280 Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µ,m) 16mm(coating diameter: 250 ~ 1000µ,m) Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm Fiber countSingle Fiber aligning method Core , aligning Return loss>60db Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Splicing modeAuto Splicing mode12(templet), 188(user) Typical splicing timeTypical 9 sec, with standard sm fiber Protection sleeve length60mm, 40mm and a series of micro sleeves Storage of splice result5000 results, 3 parameter per result Tension test2n Fiber display and magnification400x(x or y view), 200x(x and y view) Tube heating timeTypical 30 sec Electrode life2500 No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery Display screen5 inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsRs 232 Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x160mm (h) Weight3.52 kg including battery.
TH-2004D-206AB Benchtop dispensing machine for 50ml dual cartridge packing ab glue Patent Numberï¼?ZL 2010 2 0120765.6 FEATURES 1.Feed system is 50ml dual cartridge packing two part glue 2.Dual cartridge valve good for Micro ab glue dispensing 3.High precision liquid controller system. Application good for Micro ab glue dispensing with 50ml dual cartridge packing. Liquid Material:AB GLUE,Epoxy resin,two part glue,2 part glue. Packing capacity: 50ml dual cartridge. Specificationï¼? ITEM TH-2004D-300 TH-2004D-400 TH-2004D-500 X/Y/Zworking range 300 x 300 x 100mm 400 x 400 x 100mm 500 x 500 x 100mm Dimensions (WxDxH) mm 500 x 580 x 610 600 x 680 x 610 700 x 780 x 610 Weight 34kg 39kg 46kg Standard CE Approved XY/ZMaximum Load 10 kg / 3 kg XY/Z Speed 800/350 mm/Axis Data memory capacity 9999programs Display way LCD display Drive System Precision micro-stepper motor Transmission Timing Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals 4 Inputs / 4 Outputs Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power Supply AC110V/220V Internal conversion Working Temperature 0 ï½?40 Relative Humidity 20ï½?90% (no condensation) Help you more : · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste Complete with an accessory dispensing kit: No Name ITEM QTY Part# 1 TH-2004D Robotic TH-2004D 1pcs TH-2004D 2 Liquid dispenser TH-206AB 1pcs TH-206AB 3 Dispenser fix frame TH 1pcs TH-DXF03 4 Dispensing signal line 3core-4core 1pcs TH-DSL02 5 Teach pendant/fix frame TH 1pcs TH-DT001 6 Teach pendant Cable line TH 1pcs TH-DTC01 7 Fix broad for valve TH-1000J 1pcs THDXF04 8 Valve TH-1000J 1pcs TH-1000J 9 Mixer tube 1pcs THA 10 Needle TH 10pcs TH 11 Power Cord 220V 2pcs THP06 12 Air tube 6X4mm 1pcs THA 13 Tool TH 1set TH-T04 14 Jig As sample 1set THC 15 Screw TH 1set TH-DS05 16 Connect Drawing TH 1set 17 Manual operation TH 1pcs 18 U disk(video.manual) TH 1pcs 19 Ex-work Report TH 1pcs 20 Machinery certificate TH 1pcs 21 Warranty card TH 1pcs 22 CE certificate TH 1pcs 23 Catalogue TH 1pcs
TH-2004D-206AB Benchtop dispensing machine for 50ml dual cartridge packing ab glue Patent Numberï¼?ZL 2010 2 0120765.6 FEATURES 1.Feed system is 50ml dual cartridge packing two part glue 2.Dual cartridge valve good for Micro ab glue dispensing 3.High precision liquid controller system. Application good for Micro ab glue dispensing with 50ml dual cartridge packing. Liquid Material:AB GLUE,Epoxy resin,two part glue,2 part glue. Packing capacity: 50ml dual cartridge. Specificationï¼? ITEM TH-2004D-300 TH-2004D-400 TH-2004D-500 X/Y/Zworking range 300 x 300 x 100mm 400 x 400 x 100mm 500 x 500 x 100mm Dimensions (WxDxH) mm 500 x 580 x 610 600 x 680 x 610 700 x 780 x 610 Weight 34kg 39kg 46kg Standard CE Approved XY/ZMaximum Load 10 kg / 3 kg XY/Z Speed 800/350 mm/Axis Data memory capacity 9999programs Display way LCD display Drive System Precision micro-stepper motor Transmission Timing Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals 4 Inputs / 4 Outputs Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power Supply AC110V/220V Internal conversion Working Temperature 0 ï½?40 Relative Humidity 20ï½?90% (no condensation) Help you more : · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste Complete with an accessory dispensing kit: No Name ITEM QTY Part# 1 TH-2004D Robotic TH-2004D 1pcs TH-2004D 2 Liquid dispenser TH-206AB 1pcs TH-206AB 3 Dispenser fix frame TH 1pcs TH-DXF03 4 Dispensing signal line 3core-4core 1pcs TH-DSL02 5 Teach pendant/fix frame TH 1pcs TH-DT001 6 Teach pendant Cable line TH 1pcs TH-DTC01 7 Fix broad for valve TH-1000J 1pcs THDXF04 8 Valve TH-1000J 1pcs TH-1000J 9 Mixer tube 1pcs THA 10 Needle TH 10pcs TH 11 Power Cord 220V 2pcs THP06 12 Air tube 6X4mm 1pcs THA 13 Tool TH 1set TH-T04 14 Jig As sample 1set THC 15 Screw TH 1set TH-DS05 16 Connect Drawing TH 1set 17 Manual operation TH 1pcs 18 U disk(video.manual) TH 1pcs 19 Ex-work Report TH 1pcs 20 Machinery certificate TH 1pcs 21 Warranty card TH 1pcs 22 CE certificate TH 1pcs 23 Catalogue TH 1pcs
TH-2004D-206AB Benchtop dispensing machine for 50ml dual cartridge packing ab glue Patent Numberï¼?ZL 2010 2 0120765.6 FEATURES 1.Feed system is 50ml dual cartridge packing two part glue 2.Dual cartridge valve good for Micro ab glue dispensing 3.High precision liquid controller system. Application good for Micro ab glue dispensing with 50ml dual cartridge packing. Liquid Material:AB GLUE,Epoxy resin,two part glue,2 part glue. Packing capacity: 50ml dual cartridge. Specificationï¼? ITEM TH-2004D-300 TH-2004D-400 TH-2004D-500 X/Y/Zworking range 300 x 300 x 100mm 400 x 400 x 100mm 500 x 500 x 100mm Dimensions (WxDxH) mm 500 x 580 x 610 600 x 680 x 610 700 x 780 x 610 Weight 34kg 39kg 46kg Standard CE Approved XY/ZMaximum Load 10 kg / 3 kg XY/Z Speed 800/350 mm/Axis Data memory capacity 9999programs Display way LCD display Drive System Precision micro-stepper motor Transmission Timing Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals 4 Inputs / 4 Outputs Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power Supply AC110V/220V Internal conversion Working Temperature 0 ï½?40 Relative Humidity 20ï½?90% (no condensation) Help you more : · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste Complete with an accessory dispensing kit: No Name ITEM QTY Part# 1 TH-2004D Robotic TH-2004D 1pcs TH-2004D 2 Liquid dispenser TH-206AB 1pcs TH-206AB 3 Dispenser fix frame TH 1pcs TH-DXF03 4 Dispensing signal line 3core-4core 1pcs TH-DSL02 5 Teach pendant/fix frame TH 1pcs TH-DT001 6 Teach pendant Cable line TH 1pcs TH-DTC01 7 Fix broad for valve TH-1000J 1pcs THDXF04 8 Valve TH-1000J 1pcs TH-1000J 9 Mixer tube 1pcs THA 10 Needle TH 10pcs TH 11 Power Cord 220V 2pcs THP06 12 Air tube 6X4mm 1pcs THA 13 Tool TH 1set TH-T04 14 Jig As sample 1set THC 15 Screw TH 1set TH-DS05 16 Connect Drawing TH 1set 17 Manual operation TH 1pcs 18 U disk(video.manual) TH 1pcs 19 Ex-work Report TH 1pcs 20 Machinery certificate TH 1pcs 21 Warranty card TH 1pcs 22 CE certificate TH 1pcs 23 Catalogue TH 1pcs
It is machine to adjust the mixing of pu, polysulphite and silicone type materials. This operating system is especially designed for the insulating glass production and improved. This machine can also be used as filling the cartridges by only releasing the mixing system. The mixed material can also be taken out of the gun. System works hydraulically and b component may work pneumatically if required. How to introduce the materials: A and b components seperately handled by the hydraulic system pumps. When the material is reloaded, it is necessary to empty the air inside the machine. Besides, time heaters available on specific parts to avoid the improper working under cold weather conditions. Mixing ratio: A and b component can be controlled seperately by either hydraulic system or dosing pump. The adjustment can be made as desired by any ratio figures are between 1:6 and 1:16 Mixing system: The mixers by the end of the extension output hoses mixes the materials homogenously and completely. Cleaning: It is necessary to clean and maintenance the machine after long periods of idle being of production. When the mixed material is forgotten inside the machine for a period of time, machine itself warns by the use of alert lamp. B component key is switched to the opposite direction allowing the by-pass system to fill the mixers with a component and so unwanted freeze can be avoided. Technical specifications: Mixing ratio: 1:6 / 1:16 Material output: approx 2.7 kg./min. Which may deviate according to material used Operating system: hydraulics ( a ve b compenant. B component may be pneumatic.) Operating pressure: between 250 - 450 bar Air pressure: max. 6 bar Power supply: 3 kw (380 v 59 hz.Expect the heaters) Controlling system: plc controlled Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm In wooden case
Carbon Steel Pipes Feature:- Size : (Seamless): 8 NB-24 NB Size:(SAW,LSAW,HSAW,EFW): 16 NB-100 NBWall Thickness available: Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thicknessGrades: API 5L Gr. B / X42 / X46 / X52 / X56 / X60 / X65 / X70 / X80 IN PSL1 & PSL2 Properties :-PSL1Grade Chemical Composition Mechanical Properties C (Max)Mn (Max)P (Max)S (Max)TENSILE ( Min )YIELD ( Min )Psi X 1000'MpaPsi X 1000'MpaX520.261.40.030.036645552359PSL 2 Grade Chemical Composition Mechanical PropertiesC (Max)Mn (Max)P (Max)S (Max)TENSILE ( Min )YIELD ( Min )C. E. IMPACT ENERGYPsi X 1000'MpaPsi X 1000'MpaPCMIIWJFT/LBX520.221.40.0250.01566 110455 ,75852 ,77359 ,5310.250.43T/L 27/41T/L 20/30 Material In Stock :- Sumitomo JapanMSL IndiaNippon JapanTenaris Italy VM France, Mannesmann Brazil, Other Information Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer) Minimum Order Quantity: 1 Ton Port of Dispatch: Nhava Sheva, Mumbai Production Capacity: 100ton Delivery Time: Within2Weeks
50 foot roll fiberglass motorcycle exhaust pipe wrap tape thermo header engine Specifics and benefits: Made of high quality pulverized lava rock converted silicate fiber material for maximum heat and wearing resistance Withstands 2500 ¡ãf (fahrenheit) radiation heat and 1800 ¡ãf (fahrenheit) direct heat Serves as heat and air shield for enhancing energy transfer and air flow performance Tested to tolerate chemical, such as radiator fluid, and oil corrosion Dimensions: 2" (width) x 1/16" (thick) x 50ft (length) 100% brand new Professional installer is highly recommended (no instruction included) Application: Used to wrap multiple applications including: air intake, intercooler, supercharger, turbo pipes and tubing, starters, hoses, wiring, cold air induction systems, protects body parts and components by reflecting heat away. Keeping inner air and parts cooler and more efficient. Universal application on exhaust headers and any exhaust pipings.. Keeps heat where you want it and away from where you don't! Motorcycles Street rodshot rods Atvstractor and lawnmowers Muscle carsvintage carsgo carts Aviation & marinecommercial trucksfleet vehicles Farm equipment Mom's mini van Anything with an exhaust! Exhaust wrap packaged in standard export box
Applications Features FTTX application CATV network Wavelength division multiply Low insertion loss and high uniform Low polarization relevant Redundant reliability Low cost and small volume Performance Specifications: Type 1,4 1,8 1,16 1,32 Operating wavelength£¨nm£© 1260-1650 Insertion loss (dB)1,2 Typical 7.2 10.5 13.5 16.5 Maximum 7.5 11.0 14.0 17.5 Loss uniformity (dB)1,2 Maximum 0.6 0.8 1.2 1.7 Dimensions(mm) Long 40.0 40.0 40.0 50.0 Width 4.0 4.0 4.0 7.0 High 4.0 4.0 4.0 4.0 Polarization dependent loss (dB)1,2 Maximum 0.3 Wavelength dependent loss (dB) Maximum 1.0 Return loss (dB)1,3 Minimum ¡Ý50 Directivity (dB)1,3 Minimum ¡Ý55 Operating temperature (¡æ) -40 to 85 Storage temperature (¡æ) -40 to 85 Optical fiber type SMF-28 Or the customer require Optical fiber length (m) 1.2 1. All measurement at room temperature, 2. Specifications exclude connector loss 3. Exclude connector Ordering Information: Input channel number Input optical fiber type Output channel number Output optical fiber type Including attaches the type 1-1 channel 2-2 channel B-250um bare optical fiber L-900um loose tube T-900um tight buffer 04-4 channel 08-8 channel 16-16 channel 32¨C32 channel 0-offset pigtail does not Claude the connector L-900um loose tube T-900um tight buffer 0-no connector 1-FC/PC 2-FC/APC 3-SC/PC 4-SC/APC 5-LC X=customer require .
Features Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display  Usb & vga interface Software upgrade via usb interface Specifications Model Kl-300t Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µm)    16mm(coating diameter: 250 ~ 1000µm) Fiber diameterCladding diameter:80 ~150µm  coating diameter:100~ 1000¦ìm Fiber countSingle Fiber aligning methodCore or clad aligning Image processing methodDigital Actual average splice loss0.02db(sm),  0.01db(mm), 0.04db(ds),  0.04db(nzds) Splicing timeTypical 9 sec, with standard sm fiber Splicing mode53(templet), 40(user) Splice loss estimateMore accurate Return loss>60db Storage of splice result4000 results, 20 parameter per result Fiber display and magnification300x(x or y view), 150x(x and y view) Tube heating timeTypical 30 sec Tube heating mode9(templet), 24(user) Tube heating temperatureCan be adjusted Applicable protection sleeve length60mm, 40mm and a series of micro sleeves Tension test2n Electrode life2500 No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery Display screen5.6 tft inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsUsb 1.1 and vga Operating condition0 ~ 5000m above sea level,  0 ~ 95%rh and -10¡«50¡æ,  respectively,  max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x150mm (h) Weight2.7 kg excluding battery, 3.2 kg including battery.