Features
Core to core alignment by pas technology ( pas:profile alignment system)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display 
Usb & vga interface
Software upgrade via usb interface
Specifications
Model Kl-300t
Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655)
Fiber cleaved length8~16mm(coating diameter: 250µm)   
16mm(coating diameter: 250 ~ 1000µm)
Fiber diameterCladding diameter:80 ~150µm  coating diameter:100~ 1000¦ìm
Fiber countSingle
Fiber aligning methodCore or clad aligning
Image processing methodDigital
Actual average splice loss0.02db(sm),  0.01db(mm), 0.04db(ds),  0.04db(nzds)
Splicing timeTypical 9 sec, with standard sm fiber
Splicing mode53(templet), 40(user)
Splice loss estimateMore accurate
Return loss>60db
Storage of splice result4000 results, 20 parameter per result
Fiber display and magnification300x(x or y view), 150x(x and y view)
Tube heating timeTypical 30 sec
Tube heating mode9(templet), 24(user)
Tube heating temperatureCan be adjusted
Applicable protection sleeve length60mm, 40mm and a series of micro sleeves
Tension test2n
Electrode life2500
No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery
Display screen5.6 tft inch color lcd monitor
Image change overThe fiber image is turned upside down
TerminalsUsb 1.1 and vga
Operating condition0 ~ 5000m above sea level,  0 ~ 95%rh and -10¡«50¡æ,  respectively,  max. Wind velocity of 15m/s
Power supplyAc 100-240v with ac adapter inner li-battery(6600mah)
Dimensions150mm(l) x150mm (w) x150mm (h)
Weight2.7 kg excluding battery, 3.2 kg including battery.
Features Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto check quality of , cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Specifications ModelKl-280 Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µ,m) 16mm(coating diameter: 250 ~ 1000µ,m) Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm Fiber countSingle Fiber aligning method Core , aligning Return loss>60db Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Splicing modeAuto Splicing mode12(templet), 188(user) Typical splicing timeTypical 9 sec, with standard sm fiber Protection sleeve length60mm, 40mm and a series of micro sleeves Storage of splice result5000 results, 3 parameter per result Tension test2n Fiber display and magnification400x(x or y view), 200x(x and y view) Tube heating timeTypical 30 sec Electrode life2500 No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery Display screen5 inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsRs 232 Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x160mm (h) Weight3.52 kg including battery.
Both X and Y axis display Large multiple & visible fiber core Turn-over display screen to use conveniently Inner light to set fiber at night Auto check end-face of fiber Auto calculate splicing loss Auto select suitable fusion program Small bulk and light weight & alternating /Direct Current available Screen menu for simple operation Concave weatherproof cover & Max. wind velocity of 15m/s
Features Rugged construction providing shock, dust and moisture resistance Dual monitor position with automatic image orientation Automatic arc calibration and iber identiication User-selectable iber clamping method sheath clamp or fiber holders Auto-start tube heater feature Color LCD display with anti-relective coating for excellent visibility in bright sunlight Simultaneous battery charge and splicer operation Long life battery (up to 160 splice/heat cycles per charge) Detachable work table incorporated into the transit case Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet Green friendly RoHS & WEEE compliant Specifications Model FSM-60S Applicable Fibers SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655) Cladding Diameter 80 um to150 um Coating Diameter 100 um to 1000 um Fiber Cleave Length 8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS Splicing Time Typical 9 seconds with standard single-mode fiber Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera core alignment data Storage of Splice Result Last 2000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation Magnification 300X for single X or Y view, or 187X for X and Y view Viewing method Dual cameras with 4.1 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively mechanical Proof Test 1.96 to 2.25N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves Protection Sleeve Length 60mm, 40mm, micro Splice Cycles with Battery Typical 160 cycles with power save functions activated Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater Wind Protection Max. wind velocity of 15m/s. (34 mph) Dimensions (W × D × H ) 136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches Weight 2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery.
Features Color LCD monitor & 256 magnification Compact & light weight Reversible monitor with control panel on each side Max. Wind velocity of 15m/s. 8 sec. Splice time, 40 sec. Tube-heat time Simultaneous x and y views Large capacity internal battery System test ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8000 groups of splice results Multiple language options Specifications ModelDvp-730 Applicable fibersSm, mm, ds, nz-ds, edf Cladding diameter100 to 150um Coating diameter100 to 1000um Fiber cleaved length8-22mm (standard) Splicing modeAuto & manual Average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Return loss 60db Environment conditions-25-+50(operation temperature), 0-95%rh(humidity), 0-5000m (altitude) Storage environment-40-+80(temperature), 0-95rh (humidity) Protection sleeve length20mm, 40mm, 60mm Tension test2.0n (standard) LanguageEnglish, chinese, korea, russian, spanish etc. InterfaceRs232 interface & video output Power supplyAc adaptor: 85-260v input voltage Internal battery: 12v voltage, 10ah, up to 200 times of continuous splices and heatsdc adaptor: 12v voltage, optional multipurpose external battery Dimensions170(w)140(h)170(d)mm Weight3.3kg.
Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Support Chinese, Japanese, Germany, Spanish, Russian, Korea, Portuguese, French, Italian, Turkish Splicing machine Tcw-605c with THREE advantages: --Suitable for 0.25mm bare fiber, 0.9mm buffered fiber, Splice on Connector, Flat FTTH ---Fiber Cable(Drop Cable), clamp Change free(The First, Unique in the world) --Button and Menu is same as FSM-60S, in accord with the habit of usage --One Step Fiber Cleaver with Automatic Blade Rotation (The First, Unique in China) Features Techwin Fibre Optic Splicing Machine TCW-605C ( One Year Warranty ) --PAS image digital processing system,core or clad alignment is optional; --The arc is calibrated by the environmental parameters as temperature and pressure; --Variety display group,the Maximum image magnification is 300; --Typical splicing time is 8 seconds,30 seconds heating; --Intelligence operate,auto heat or work when open the shield; --High definition 5.7' colorful LCD; --Hight to 4000 groups fusion records can be stored; --High capacity,plug battery,long work time; --Multilingual machine Product Details Techwin Fibre Optic Splicing Machine TCW-605C ( One Year Warranty ) 5.6 inch TFT color LCD monitor display The fiber magnify up to 3000 times,all steps of fiber fusion clear at a glance. Auto caculate splicing loss,low splicing loss. Techwin Fusion Optical Fiber Splicer TCW-605C( One Year Warranty ) ARC Fusion Splicer, Carrying Case, High Precision Fiber Cleaver, Tri-hole Fiber Coat Stripper, AC Adapter/Battery Charger, Battery Charger Cord, Battery Pack, Spare Electrodes(one pair), Blower Brush, V-groove Cleaning, Quick Reference Guide, Video Instruction Manual, Cooling Tray, Alcohol Dispenser, Monitor Coating, Monitor Cover, USB Cable.
Signal Fire AI-7C Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty.
Signal Fire ai9 Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty. (OEM service are accpetable)
Signal Fire AI-8C Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty. (OEM service are accpetable)
Signal Fire AI-7C Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty.