We are leadding manufactrer and exporter of Brass and Metal swival ball joint.
Available in sizes 3/4" through 3 " up to 15,000 PSI non-stock cold working pressure, our Swivel Joints offer the following features. Minimum flow restriction Heavy duty hex head style ball loading plug Grease retainer ring (ensures clean ball race) Standard packing units Superior hardened ball races ensure uniform surface hardness and depth for longer life under severe thrust and radial loading Standard Swivel Joints are provided with API line pipe threads. Other end connections are available on request Available for standard and sour service All sizes are available in 8 styles, for 360 rotation in 1, 2 or 3 planes. For price and specification please contact us
Description: Swivel Joints are used in flow line. These products are made from high strength alloy steel by forging and the heat treatment is carried out on it, thus its long service life and service strength are guaranteed under the rated working pressure. They are designed for the critical service conditions that exist in fracturing, cementing, acidizing and well testing. Both ends of the swivel joint can be connected by the LP inner thread connection and also can be connected by union so they could be installed in various kinds of pipelines.
Swivel Joints are used in flow line. These products are made from high strength alloy steel by forging and the heat treatment is carried out on it, thus its long service life and service strength are guaranteed under the rated working pressure. They are designed for the critical service conditions that exist in fracturing, cementing, acidizing and well testing. Both ends of the swivel joint can be connected by the LP inner thread connection and also can be connected by union so they could be installed in various kinds of pipelines.
High Pressure 90 degree elbow pipe/Swivel joints Nominal Size:2"-4" Pressure Rating:2000-15000PSI Material:Alloy Steel Standard:API 16C Pipe Elbows are mainly used for connecting two pipes or tubes,allowing a change of direction.We can provide short radius elbows and long radius elbows.Usually,pipe elbows are made of carbon steels,alloy steels,stainless steel,and etc.
a. Short Radius SJ : 1" & 2" from style 10 to style 60 b. Long Radius SJ : 2" & 3"from Style 10 to Style 100
Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Seal rings are fully interchangeable with SPM or FMC equivalent products. Union and the AQE swing joint are applicable to cementing trucks, fracturing trucks, various manifolds, pipelines and other high pressure equipment, which are important fittings to transfer oil, water, fracturing fluids and mixed liquids. The wellhead equipment China are made of high quality steel forged by metal process. The model of union; FIG602, FIG1002, FIG 1003, FIG 1502, FIG2002, FIG2202; rated: 5000Psi ( 35MPa ) , 10000Psi(70MPa). All unions are made in English system, and can be interchanged with products in international market. Seal rings are fully interchangeable with SPM or FMC equivalent products
Description Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. It is used to change the pipeline connection direction, to make it more convenient and easier to connect the pipe fittings. It is widely used in acid working environment, to connect the high pressure discharge pipe, suction pipe, temporary flow pipeline, well test line and high pressure transmission line.
Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. It is used to change the pipeline connection direction, to make it more convenient and easier to connect the pipe fittings. It is widely used in acid working environment, to connect the high pressure discharge pipe, suction pipe, temporary flow pipeline, well test line and high pressure transmission line.
H2S service API 16C Chiksan Swivel Joint Swivel Joint is a mental pipe adapter installed with roller bearings based on the introduced technology from FMC and our technical innovation. The swivel joints with size ranging from 1â?? to 4â?? and rated working pressure rang of 25-140MPa (3626 PSI-20 000PSI) are available. Various models of swivel joints and relevant repair kits for normal temperature, low temperature and sour gas (H2S) condition can be provided. Long Radius Swivel Joints 10,20,30,50,60,80,100 types for option; Short Radius Swivel Joints 10,20,30,40,50,60,70,80 types for option.
Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
A long radius (long sweep) swivel joint is a type of swivel joint that has a longer radius of curvature than a standard swivel joint. This longer radius allows for smoother rotation and less turbulence, which can improve flow characteristics and reduce wear and tear on the joint. Long radius swivel joints are often used in high pressure applications, such as oil and gas drilling, where smooth rotation and low turbulence are critical. Here are some of the specifications of long radius swivel joints: 1. Sizes: 1-4 inches 2. Working pressure: 3,000-20,000 psi 3. Materials: Steel, stainless steel, alloy steel 4. End connections: Threaded, flanged, union 5. Working Pressure: 25 Mpa - 70 Mpa Here are some of the applications of long radius swivel joints: 1. Oil and gas drilling 2. Fluid handling 3. Mud lines 4. Sour gas 5. Acidizing and fracturing 6. Testing lines 7. Crude oil and gas
A long radius long sweep swivel joint is a type of swivel joint that has a longer radius of curvature than a standard swivel joint This longer radius allows for smoother rotation and less turbulence which can improve flow characteristics and reduce wear and tear on the joint Long radius swivel joints are often used in high pressure applications such as oil and gas drilling where smooth rotation and low turbulence are critical Here are some of the applications of long radius swivel joints Oil and gas drilling Fluid handling Mud lines Sour gas Acidizing and fracturing Testing lines Crude oil and gas Here are some of the specifications of long radius swivel joints Sizes 14 inches Working pressure 300020000 psi Materials Steel stainless steel alloy steel End connections Threaded flanged union Working Pressure 25 Mpa 70 Mpa
1. High quality rotary joints and two delicate bearing installed in high stiffness rotor are to ensure vibration-free performance in long-term operation. 2. Rotors undergo special heat treatment to increase stiffness. 3. Stationary ring enclosure is made out of concentrated carbon graphite, anti-wear-out, waterproof, and suitable for dry operation. 4. Especially the area of rotating sealing faces has to be minimized to the minimum, even under higher-pressure environment. 5. The effect of equilibrium in sealing face from accumulation of our company experiences in mechanics is the best. 6. Adaptation of stationary ring made out of bronze in RF-type rotating connector is for the use in high-pressure 200 bar.
í+ recommended operating specifications 1. Max. Hydraulic pressure : 210 bar (50rpm) 2. Max. Air pressure : 10 bar 2. Max. Temperature : 100ój 3. Max. Speed : 750rpm í¦ all models available with the following options 1. Shaft : alloy steel 2. Housing : alloy steel 3. Standard threads : rc
Standard chiksan joint/chiksan swivel joint Product description 1).Size: 2'', 3'', 4'' 2).Working pressure:6000-20000psi(42mpa-140mpa) 3).Working temperature: -29°c~121°c. 4).Application enrvironment: standard or h2s 5).Standard: api standard 1 our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa. 2 various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa). 3 we can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4 patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5 all sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment. 6 sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7 usually good lubrication can ensure that swivel joints work normally without much maintenance.
Product Description Integral pup joints: Integral pup joints are made of high quality alloy steel, integrally constructed, forged ended, and features seamless upset construction. Detachable wing union end connections enable fast, easy make-up and break-out of temporary flow lines. Eliminates all welds or threads. Uniform bore for greater flow capacity. Pup joints are hydrostatically tested at 1.5 times the rated cold working pressure. Available from 2" to 3" sizes, lengths for pup joints range from 1 feet to 12 feet to 15,000 psi working pressure. Integral pup joints can be made available with two models, one is plain integral pup joints, another is pup joints with retaining shoulder, integral pup joints with retention shoulder features specially machined shoulder to prevent nut from sliding down pup joints when held vertically. Pup joints (flowline pipes) are pipe lines with thread, flange or union connectors on both ends, designed to be compatible with FMC Chiksan pup joints and SPM pup joints.Various pup joints are available for high/low pressure and temperature and H2S environment,such as integral pup joints( 10 feet length to handle fluids at cold working pressure), sour gas pup joints, pressure thread seal straight pipes and non-pressure thread seal pup joints. NPST pup joints: NPST Pup joints are made of high quality seamless pipeline with male and female detachable Hammer Unions. Uniform bore for greater flow capacity. Available from 2" to 3" sizes, lengths for pup joints range from 1 feet to 20 feet to 15,000 psi working pressure. Butt weld pup joints: Butt weld Pup joints are made of high quality seamless pipeline with male and female Hammer Unions welded to pup joint pipeline Detachable wing union end connections enable fast, easy make-up and break-out of temporary flow lines Pup joints are hydrostatically tested at 1.5 times the rated cold working pressure Available from 2" to 4" sizes, lengths for pup joints range from 1 feet to 20 feet to 6,000 psi working pressure
1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29�°C~121�°C. 4).application enrvironment: standard or H2S 5).Standard: API standard 1 Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2 Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3 We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4 Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5 All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6 Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7 Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
