Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Seal rings are fully interchangeable with SPM or FMC equivalent products. Union and the AQE swing joint are applicable to cementing trucks, fracturing trucks, various manifolds, pipelines and other high pressure equipment, which are important fittings to transfer oil, water, fracturing fluids and mixed liquids. The wellhead equipment China are made of high quality steel forged by metal process. The model of union; FIG602, FIG1002, FIG 1003, FIG 1502, FIG2002, FIG2202; rated: 5000Psi ( 35MPa ) , 10000Psi(70MPa). All unions are made in English system, and can be interchanged with products in international market. Seal rings are fully interchangeable with SPM or FMC equivalent products
High Pressure 90 degree elbow pipe/Swivel joints Nominal Size:2"-4" Pressure Rating:2000-15000PSI Material:Alloy Steel Standard:API 16C Pipe Elbows are mainly used for connecting two pipes or tubes,allowing a change of direction.We can provide short radius elbows and long radius elbows.Usually,pipe elbows are made of carbon steels,alloy steels,stainless steel,and etc.
A long radius (long sweep) swivel joint is a type of swivel joint that has a longer radius of curvature than a standard swivel joint. This longer radius allows for smoother rotation and less turbulence, which can improve flow characteristics and reduce wear and tear on the joint. Long radius swivel joints are often used in high pressure applications, such as oil and gas drilling, where smooth rotation and low turbulence are critical. Here are some of the specifications of long radius swivel joints: 1. Sizes: 1-4 inches 2. Working pressure: 3,000-20,000 psi 3. Materials: Steel, stainless steel, alloy steel 4. End connections: Threaded, flanged, union 5. Working Pressure: 25 Mpa - 70 Mpa Here are some of the applications of long radius swivel joints: 1. Oil and gas drilling 2. Fluid handling 3. Mud lines 4. Sour gas 5. Acidizing and fracturing 6. Testing lines 7. Crude oil and gas
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
High Pressure Extension Line Product Code: MED 168 Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: 5,7,10,25-250 cm (diameter 1.3-3.0) Description Manufactured to withstand pressures upto 40 kg/cm2. Fitted with male and female luer locks for secure connection Smooth internal surface to minimize turbulence. Disposable, sterile and non-pyrogenic.
High Pressure Laminate Sheet that we are offering is unmatched in terms of design and quality. It has got high aesthetic value and impressive design. This laminated sheet is made of solid hardwood that is highly resistant to termites, moisture, and tough climate conditions, therefore, it does not degrade in quality or become inferior in the long run. To meet the diverse demands of our customers, we are supplying High Pressure Laminate Sheet in a plethora of sizes and types and that too at a budget-friendly price.