a. Short Radius SJ : 1" & 2" from style 10 to style 60
b. Long Radius SJ : 2" & 3"from Style 10 to Style 100
Description: Swivel Joints are used in flow line. These products are made from high strength alloy steel by forging and the heat treatment is carried out on it, thus its long service life and service strength are guaranteed under the rated working pressure. They are designed for the critical service conditions that exist in fracturing, cementing, acidizing and well testing. Both ends of the swivel joint can be connected by the LP inner thread connection and also can be connected by union so they could be installed in various kinds of pipelines.
High Pressure 90 degree elbow pipe/Swivel joints Nominal Size:2"-4" Pressure Rating:2000-15000PSI Material:Alloy Steel Standard:API 16C Pipe Elbows are mainly used for connecting two pipes or tubes,allowing a change of direction.We can provide short radius elbows and long radius elbows.Usually,pipe elbows are made of carbon steels,alloy steels,stainless steel,and etc.
Description Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. It is used to change the pipeline connection direction, to make it more convenient and easier to connect the pipe fittings. It is widely used in acid working environment, to connect the high pressure discharge pipe, suction pipe, temporary flow pipeline, well test line and high pressure transmission line.
Bend is a kind of metal pipe joints with ball bearing, is in the united states FMC company transfer of technology digestion, absorption and production of technical innovation on the base of series products, its specifications are 1"-4", the rated working pressure of 25-140 Mpa(3629 psi- 20000psi), can provide the normal temperature, low temperture and sulfurous gas under the condition of using various typeds of elbow and repair kits.
High Pressure 90 degree elbow pipe/Swivel joints Nominal Size:2"-4" Pressure Rating:2000-15000PSI Material:Alloy Steel Standard:API 16C Pipe Elbows are mainly used for connecting two pipes or tubes,allowing a change of direction.We can provide short radius elbows and long radius elbows.Usually,pipe elbows are made of carbon steels,alloy steels,stainless steel,and etc.
Supplier: Flanges, fittings, swivel joints, hammer unions, welding neck flange, slip on flange, socket weld flange, lap joint flange, threaded flange, blind flange, spectacle blind flanges, high hub flanges, flat flanges, ring type joint flanges, long welding neck flange, orifice flange, jis flange, api 6a flange, sorf flange, blrf flange, groove & tongue flanges, expander flange, elbow, tees, cross, forged street elbow, coupling, half coupling, cap, round plug, hexagon plug, square plug, hexagon bush, forged hex nipple, forged union, pipe nipple, bull plugs, swage nipple, hose union, hose barb union, long radius swivel joints, short radius swivel joints.
asme b16.5 flange, asme b16.47 flange, asme b16.48 flange, asme b16.36 flange, din flange, bs 4504 flange, bs 10 flange, en1902 1 flanges, stainless steel flange, carbon steel flange, duplex & super duplex steel flange, low temperature carbon steel flange, alloy steel flange. Pipe fittings
Services: Manufacturing, production, exporter
A swage nipple eccentric is a type of pipe fitting that is used to connect two pipes at an angle. The fitting has an eccentric bore, which means that the center of the bore is offset from the center of the fitting. This allows the fitting to be aligned with the two pipes at an angle. The technical specifications of a swage nipple eccentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples eccentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple eccentric: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.
A swage nipple concentric is a type of pipe fitting that is used to connect two pipes of the same diameter. It is made of a single piece of metal that is swaged, or expanded, to fit tightly around the pipes. The swage nipple is then inserted into the pipes and secured with a nut. The technical specifications of a swage nipple concentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples concentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple concentrics: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.
A bull plug is a solid plug used as an isolation device in piping systems, conduits or wellbore tubulars. It is a short part with one threaded end and one rounded closed end. The threaded end is used to connect the bull plug to the pipe or conduit, and the closed end provides a barrier to fluids or gases. The technical specifications of a bull plug will vary depending on the material, size, and thread type. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Bull plugs are used in a variety of applications, including: A. Blocking off pipelines or conduits B. Isolating sections of piping for maintenance or repair C. Preventing the flow of fluids or gases D. Protecting equipment from contamination They are also used in oil and gas drilling operations to plug off the bottom end of down-hole logging instruments from borehole fluids. Here are some of the advantages of using bull plugs: a. They are simple and easy to install. b. They are available in a variety of sizes and materials to meet the needs of different applications. c. They are relatively inexpensive. d. They can be used to isolate a variety of fluids and gases. Overall, bull plugs are a versatile and effective way to isolate fluids and gases in piping systems, conduits, and wellbore tubulars. They are simple to install and available in a variety of sizes and materials to meet the needs of different applications.
