Specification:
1).size: 2'', 3'', 4''
2).working pressure:6000-20000psi(42Mpa-140Mpa)
3).working temperature: -29°C~121°C.
4).application enrvironment: standard or H2S
5).Standard: API standard
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
We are leadding manufactrer and exporter of Brass and Metal swival ball joint.
Ball joint.
1. High quality rotary joints and two delicate bearing installed in high stiffness rotor are to ensure vibration-free performance in long-term operation. 2. Rotors undergo special heat treatment to increase stiffness. 3. Stationary ring enclosure is made out of concentrated carbon graphite, anti-wear-out, waterproof, and suitable for dry operation. 4. Especially the area of rotating sealing faces has to be minimized to the minimum, even under higher-pressure environment. 5. The effect of equilibrium in sealing face from accumulation of our company experiences in mechanics is the best. 6. Adaptation of stationary ring made out of bronze in RF-type rotating connector is for the use in high-pressure 200 bar.
í+ recommended operating specifications 1. Max. Hydraulic pressure : 210 bar (50rpm) 2. Max. Air pressure : 10 bar 2. Max. Temperature : 100ój 3. Max. Speed : 750rpm í¦ all models available with the following options 1. Shaft : alloy steel 2. Housing : alloy steel 3. Standard threads : rc
Origin: Vietnam Material: 100% natural rattan Diameter: 8cm, 10cm, 12cm, 14cm, ... Feature: Eco-friendly, smooth, durable Usage: Takraw sport game, decoration,... Payment term: L/C, TT, Paypal,...
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
LED light.
