Head Mounted Temperature Transmitters Suppliers and Manufacturers

Product Overview NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. Features Support multiple thermal resistance and thermocouples Thermal resistance supports 2/3/4-wire connection mode Thermocouple can use cold end compensation function Better accuracy: PT100 ±0.3 ; K-type ±0.4 Universally programmable for various input signals Available protocols: HART /FF H1 /PROFIBUS PA Parameter Value Input Signal Resistance: PT100, CU50, CU100, 0~500Ω, 0~4000Ω Thermocouple: B, E, J, N, K, R, S, T Voltage signal: -100mV~100mV Channel Single RTD Wiring 2-wire, 3-wire, 4-wire Bus Power 9~32 VDC Current consumption (static): â?¤14mA Bus Signal Communication ratio 31.25Kbit/s, current mode Isolation Between terminal and housing: 1kV Working Temperature -40~85 Humidity Range 10%~90%RH Start Time â?¤5s Refresh Time 0.5s EMC GB/T 18268-2000 Protection IP20 Signal Type Suggested Range () Accuracy Resistance 0~500Ω,0~4000Ω ±0.05% PT100 -200 ~ 850 ±0.2 PT1000 -200~ 850 ±0.1 CU50 -50 ~ 150 ±0.3 CU100 -50 ~ 150 ±0.2 mV -100mV ~ 100mV 0.05% B 500 ~ 1810 ±1.0 E -200 ~ 1000 ±0.4 J -190 ~ 1200 ±0.4 K -200 ~ 1372 ±0.4 N -190 ~ 1300 ±0.8 R 0 ~ 1768 ±1.0 S 0 ~ 1768 ±1.0 T -200 ~ 400 ±0.4

The ZP series Temperature Transmitter is designed to meet common Single Point measurement application requirements. This transmitter can easily work with a variety of sensors (RTDs and thermocouples) and thermowells. It provided in a head mount configuration suitable for installation in a wide variety of connection heads and housings. A PC-programmable interface is available, providing an easy-to-use configuration method from any PC. Basic temperature transmitter offers a reliable solution for temperature monitoring points, provides flexible and reliable performance in process environments, Excellent performance with low temperature drift and auto zero calibration, reducing the need for expensive extension wires and multiplexers. Power Supply 8.5VDC~32VDC Input Types 4-20mA / 20-4mA; RTD(PT100,PT200,PT500,PT1000,Cu50); R(0-400 ,0-4000 ); TC(K,E,S,B,R,J,T,N); mV(-80-+80mV); V(0-1V) Output signal types 4-20mA or 0...1/5V, 0...1/10V Response Time < 0.4S (0-90%,100%-10%) Precision �±0.05% Temp. Drift 0.01% per Celsius Volt fluctuation influence �±0.005% X span / below V DC Load Capacity < 700 in 24VDC; (mA output) < 1060 in 36VDC (Volt output) Isolation Strength AC1500v 1min between the input / output IP Ranking Casing/Terminal IP50/IP20

- Great performance with excellent RTD sensor element - 2-Wired 4~20mA output - IP65 class for the extreme condition use

Head Mounted Temperature Transmitters

MS181 is an intelligent temperature transmitter module which can be programmed through a PC with Configuration Kit. It has measurement input for resistance thermometers (RTD) ,thermocouples, resistances or millivolt signals in 2-,3- or 4-wire connection, and converts various input signals into a 4~ 20mA analog output signal after linear processing. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use the MS181 programming tool Measuring range Set via PC PC Interface USB/RS232 Input type RTD, TC, R or Millivolt signal Convert accuracy ¡Ü0.1£¥FS Cold junction accuracy ¡À1(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output Max-load £¨V -8V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Isolated voltage 1500V AC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: ¡Ü3.6mA or¡Ý21.0mA Power supply 8¡«30V DC Temperature drift 0.01£¥ FS / 1 Long-term stability ¡Ü0.1 per year or 0.05£¥ per year Ambient -40¡«+85

MS183 , a smart 2-wire in-head and dual-input transmitter module with HART® -protocol, has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection and converts various input signals into a standard 4 to 20 mA analog(high selector, average value or D-value) output signal or 2-way digtal output signals with HART® -protocol after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation also is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use PC or the hand operator Measuring range Set via PC or by the hand operator Input type Dual-input ( RTD, TC, R or Millivolt signal) Convert accuracy ¡Ü0.1£¥FS Cold junction accuracy ¡À1¡æ(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output HART ¨CProtocol output (2-way) Max-load £¨V -16V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Isolated voltage 1500VAC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: ¡Ü3.6mA or ¡Ý21.0mA Automatic switching while sensor damaged Power supply 16¡«30V DC Temperature drift 0.01£¥ FS/1¡æ Long-term stability ¡Ü0.1¡æ per year or 0.05 £¥per year.

• Universal PC programmable (PCP) • 2 wire technology, 4 to 20 mA analogue output • High accuracy in total ambient temperature range • Configuration during measurement using configuration kit • Customer specific measurement range setting • Wide measurement range, according to requirement Field of application • PC programmable (PCP) Temperature head transmitter for converting the input signal into a standard 4 to 20 mA analog output signal • Input: Resistance thermometer (RTD) Pt100 • Configuration using a PC with MS180 configuration kit (MS180-PC). Appearance and Size (in mm) NOTE: When order, please specify the measuring range, we’ll offer programming tool if needed.

MS182 is a smart in-head transmitter module with HART® -protocol. It has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection, and converts various input signals into a standard 4 to 20 mA analog output signal after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use PC or the hand operator Measuring range Set via PC or by the hand operator Input type RTD, TC, R or Millivolt signal Convert accuracy 0.1£¥FS Cold junction accuracy ¡À1(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output HART ¨CProtocol output Max-load £¨V -13V£©/0.025A£¨Current output £© Limit current 25mA Response time 1s Isolated voltage 1500V AC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: 3.6mA or ¡Ý21.0mA Power supply 13¡«30V DC Temperature drift 0.01£¥ FS/1 Long-term stability 0.1 per year or 0.05 £¥per year Ambient -40¡«+85.

ABB Make TTH200 Head Mounted Temperature Transmitter Model:TTH200.Y0.H.BS-.EM..GHA...D3.SF.Z2.C07.M5 Communication Protocol:HART, programmable, output signal 4 ... 20 mA Display Options:LCD indicator type AS Mounting Options:Snap-on fixing set for 35 mm rail acc. EN 60175 (incl. fixing screws)

Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min

MS150 Series multi-channel temperature monitor is a multi-point temperature measurement instrument. It takes the highest measured temperature in measuring loops as its output signal which is sent out in the form of a 4 to 20 mA standard current signal and the temperature is displayed by the built-in LED. If required, temperature at any measuring point can be shown by operating the keys on panel. Isolation is provided between the input and output. It is mainly used in the applications of multi-point temperature measurement or alarm warning system. By adopting SMT technology, it offers excellent accuracy, reliability and anti-disturbance. Primary Technical Characteristics Measuring range 0¡«100¡æ¡¢0¡«150¡æ¡¢0¡«200¡æ £¨according to user's demand£© Input type Pt100,Cu50£¨TC if specially required£© Measuring Points 2,3,4,5,6 points Convert accuracy ¡Ü0.5£¥FS linearity error < 0.1% Output 4¡«20mA Electrical isolation output Digital display LED Display accuracy 0.5% Voltage drop for display 3V Isolated voltage Drop 2V Isolate Voltage 1500V AC (Input/Output¡¢with isolator) Max-load £¨V -14V~16V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Power supply 14~30V DC Temperature draft 0.025% FS/ 1¡æ Long-term stability ¡Ü0.1¡æper year or 0.05£¥ per year Ambient -40~+85¡æ£¨Aluminium alloy .Casing£© -25 ~+75¡æ£¨Plastic Casing£© Protection level IP66£¨Aluminium alloy£©/IP62£¨Plastic£© Anti-RFI >10v/m(80MHz¡­¡­1000MHz).

Gypsum rocks, gypsum powder, rock salt (industrial salt and deicing salt), food grade salt, sodium bicarbonate, limestone, white limestone (marble chips), sulphur (granular, lumps).