Specifications
1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance
Description
It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating
odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally
friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong
covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc.
Specification Data
Solvent: Water
Pigment: Non-lead pigment
Theoretical Solids By Volume: more than 50%
Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat
Coverage varies considerably depending on application methods and surface roughness and porosity.
Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places.
Recommended Film Thickness: Wet: 80 micron
Dry: 30 micron
Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours
Recoat : 2-3 hours
Application: Brush, Roll, conventional spray or Airless Spray.
Thinner: Thin up 15% depend on different application methods & temperature.
Do not over thin by adding more than 30% water.
Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%)
Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%)
Airless spray: do not thin
Clean-up: Clean up equipment with water
Typical painting system
Substrate System
All kinds of Wall surfaces
1.Alkali Resistance Primer (1 coat)
2.Emulsion Wall Paint (2 coats)
Supplier: Waterbased wall paint, wall filling, weatherproof emulsion
Buyer: Bp 26, ammonia, margal, formalin, anti foam, 7h, titanium, lesa pol, rx 9, poliron, fragrance, y313
V300 Interior Acrylic Latex Waterbase paint White and light colors Product origin : North America Key Specifications/Special Features : General Acrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended To be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general. Solids BY Weight (%)41% +/- 5% Viscosity 95 a 105 KU @ 25C Density (g/ml) 1.31 +/- 0.035 a 25C Brightness 0 to 5 Glitter Units at 60 Drying Time To the touch 30 minutes, at 25 C (77 F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate
Section 1. Thin flakes introduction 1. Product description: thin pliable colorful flakes is made through high-temperature special treatment using special polymer resins, inorganic raw materials and imported additives. It dose not fade, and it anti-aging and anti-cracking. 2. Product use: for all kind of interior and exterior wall decorative paint, integration product, insulation board surface layer etc. 3. Product features: 3.1. Thin, lightweight, easy to blend (lightweight, less dosage, strong spraying texture) 3.2. Flexibility, not easy to agglomerate in long-term storage(no need to soak, can be stirred at a speed, not fragile, easily solve the problem of color mixing of water-water painting), with excellent stability. 3.3. Mature production technology, normal equipment, easy to mix , do not fade , with high resemblance to real stones. 4. Product appearance:1-8mm irregular flakes(dry flakes) 5. Specifications:large-sized (1-8mm), medium-sized (1-5mm), small-sized (1-3mm) 6. Thickness: 0.05-0.10mm 7. Color: as exemplified on color card (cab be modulated according to customers needs) 8. Thin pliable colorful flakes completely solve all ill of the water-in-water multicolor paint. Water-based emulsion+thin pliable colorful flakes=multicolor rock flakes granite coating. The decorative effects can be fully comparable to that of granite and marble. 9. Storage: store in a dry room with temperature of 5-35?. 10. Safety: non-hazardous products.
Section 1. Thin flakes introduction 1. Product description: thin pliable colorful flakes is made through high-temperature special treatment using special polymer resins, inorganic raw materials and imported additives. It dose not fade, and it anti-aging and anti-cracking. 2. Product use: for all kind of interior and exterior wall decorative paint, integration product, insulation board surface layer etc. 3. Product features: 3.1. Thin, lightweight, easy to blend (lightweight, less dosage, strong spraying texture) 3.2. Flexibility, not easy to agglomerate in long-term storage(no need to soak, can be stirred at a speed, not fragile, easily solve the problem of color mixing of water-water painting), with excellent stability. 3.3. Mature production technology, normal equipment, easy to mix , do not fade , with high resemblance to real stones. 4. Product appearance:1-8mm irregular flakes(dry flakes) 5. Specifications:large-sized (1-8mm), medium-sized (1-5mm), small-sized (1-3mm) 6. Thickness: 0.05-0.10mm 7. Color: as exemplified on color card (cab be modulated according to customers needs) 8. Thin pliable colorful flakes completely solve all ill of the water-in-water multicolor paint. Water-based emulsion+thin pliable colorful flakes=multicolor rock flakes granite coating. The decorative effects can be fully comparable to that of granite and marble. 9. Storage: store in a dry room with temperature of 5-35?. 10. Safety: non-hazardous products.
1. Decorative antirust paint for civil metal objects including balcony, windowsill, handrail, guard bar, etc. 2. Antirust and decoration for steel pipe scaffold, featuring large area application, good decoration, high performance price ratio, fast drying, excellent antirust performance, applicable for construction methods like spraying, brushing, immersing, etc. It is one new generation single-component waterborne metallic paint and is composed of low temperature self-crosslink filming waterborne resin, nano-functional materials, metallic pigment, various special modified agents and auxiliaries, featuring low VOC content, good decoration performance, large area application and high performance price ratio. It is applied to steel pipe scaffold antirust and decoration, ordinary metal steel structure, construction steel structure formwork antirust and decoration.
Nutex Texotile Wall Paint-super Fine Coatings For Exterior Gloss-weather Resitant Paint -suitable For High Temperatures-heat Resistant Paint
Supplier: Granite flake paint, exterior wall coating, waterbased paint, acrylic flake, exterior paint
Plastic interior wall and ceiling paint. Normal, silicon added type 3.5 kg, 10 kg, 20 kg
We provide you with the variety of wall paints at a reasonable prices.
