Automatic Closed Flash Point Tester used to measure the Closed flash point value of petroleum products.Advanced foreign technology is adopted. LCD TET's pure color touch screen displays the man-machine dialogue interface in Chinese. For parameters such as prevalue temperature oil test label atmospheric pressure and test date it has prompt menu prompt input which is convenient and fast.It is an ideal substitute for imported instruments.Widely used in railway aviation electric power petroleum industry and scientific research departments.
DSY-202ZA is the second generation instrument that is designed according to GB/T261 and ASTM D93; it is suitable to the determination of flash point of petroleum products automatically. Characteristic: 1. Igniting method can be by electricity and gas option. 2. MCU controlled, igniting, detecting and judgment of flash point, printing automatically, Touch screen display. 3. Display test status in real time 4. Set the expected flash point, the highest flash point, ignition times, detection sensitive 5.Built-in barometer pressure sensor, it can be calibrated barometer pressure in test result according to the measure barometer pressure 6. Automatic lifts arm to the complete upright position after testing 7.Easy to remove the detection device by hand, and easy to repair and clean 8. The sliding plate that is on the test cup cover, which can be removed easily, and can be cleaned each time, make the result more accuracy
DSY-202ZA is the second generation instrument that is designed according to GB/T261 and ASTM D93; it is suitable to the determination of flash point of petroleum products automatically. Characteristic: 1. Igniting method can be by electricity and gas option. 2. MCU controlled, igniting, detecting and judgment of flash point, printing automatically, Touch screen display. 3. Display test status in real time 4. Set the expected flash point, the highest flash point, ignition times, detection sensitive 5.Built-in barometer pressure sensor, it can be calibrated barometer pressure in test result according to the measure barometer pressure 6. Automatic lifts arm to the complete upright position after testing 7.Easy to remove the detection device by hand, and easy to repair and clean 8. The sliding plate that is on the test cup cover, which can be removed easily, and can be cleaned each time, make the result more accuracy
Scope of application For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F). Benefits - Conforms to ASTM D92 and related specifications - For flash points above 79 C (175F) Function characteristics 1,english operating software prompts; 2, with the experimental date, test time parameter prompts; 3, automatic correction of atmospheric pressure and calculated correction values; 4 differential detection, automatic correction system deviation; 5, scan, ignition, detection, print test data computer is done automatically; 6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel; standard wooden case
Place of Origin: Chongqing, China (Mainland) Brand Name: TOP Model Number: ACD-3000I Power: Electronic Usage: Auto Testing Machine Type: Fully Automatic Oil Acidity Tester Condition: New Method of Display: 7 inch color LCD Testing Range: 0.0005~0.5000mgKOH/g Power supply: 220V±10%,50Hz±5% Environmental Humidity:
Scope Standard ASTM D93, GB / T261-83 and ISO2719-1988 international standards. Features 1, large-screen LCD, friendly user interface 2, also has a fault of Jane function, automatic fault prompts 3, automatic temperature control, automatic lid opening and ignition, automatic print, automatic cooling, automatic air pressure correction is completed and the machine automatically displays the flash point temperature, built-in mini thermal printer to automatically report the test results 4, using USB / 232 communication interface to communicate with the host machine, a centralized management system for easy composition 5, from Germany imported stainless steel temperature sensor for detecting the temperature data is accurate and reliable 6, mechanical moving part of the servo-driven belt drive, work without gaps, low noise, reliable easy to damage, no lubrication maintenance. 7, just set the expected flash point, the instrument automatically in strict accordance with the standard test, the test ends automatically print test results, and there is a tone. Without judgment and do not rely on the operator's proficiency. 8, thermocouple detection sensitivity high detection accuracy, durability and easy maintenance. 9, sample box with built-in cooling mode heating thermostat thermal compound, and the use of German imports whisk Dan Adams compressors, thermostats no lag reliable, easy to damage Technical Parameters 1. Environment: Temperature 0 ~ 60 ? Relative humidity: = 80% 2, Display: large-screen LCD 3, heating rate: less than 50 ? 1 ? / min, higher than 50 ? 2-3 ? / min 4, temperature range: -30 ~ + 80 ?, accuracy ± 1 ? 5, the temperature measurement element: PT100 stainless steel temperature sensor 6, the ignition: gas flame ignition 7, Detection: Automatically detects a flash fire and automatically print test data. 8. Communication: USB / 232 communication interface. 9, cooling system: compressor cooling 10, print: You can print the results of this experiment or any print storage 11, using the power AC220V 50Hz, the total power: 1.5 kw
Purpose The instrument is designed and made as per the National Standard GB/T3536 ¡°Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods), and T0651 ¡°Asphalt Flash Point and Fire Point Test (Cleveland Open Cup Methods)¡± in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is used to determine flash point of petroleum products and bituminous materials, excepting fuel oil and materials having a flash point of lower than 79 ¡æ. Adopt microprocessor techniques and equipped with advanced system software, it can control temperature, apply flame, ignite, detect flash point, and print out test data automatically. It has a 6 digits display. 4 digits for temperature display and the other 2 digits for time display. Technical parameters (I) Operation condition 1. Ambient temperature: 20¡À5¡æ 2. Relative humidity: < 80% 3. Power supply: AC 220V¡À10£¥, 50¡À1Hz (II) Temperature measurement 1. Measurement range: ambient temperature~350¡æ 2. Test accuracy: 0.2% 3. Resolution: 0.1¡æ 4. Repeatability: (1) Flash point is lower than 150 ¡æ: error is less than 4 ¡æ (2) Flash point is higher than 150 ¡æ: error is less than 6 ¡æ (III) Basic parameters: 1. Speed rising speed: as per GB/T 3536-83 2. Ignition mode: By a gas flame (4 mm) 3. Total power consumption: not more than 400 W.
The instrument is designed and made as per GB/T261 ¡°Test Methods for Flash Point of Petroleum Products (Closed Cup Methods)¡±. It is used to determine the lowest temperature of a petroleum product sample when the mixture of sample vapor and air around the sample contacts flame and flashes when heated in a closed cup under stipulated condition. The lowest temperature is the flash point of the petroleum product sample. The instrument has function of automatic program temperature controlling, automatic barometric pressure modification, and modified value calculation. It can automatically control measurement procedures and test data, and it can also save, analyze and print out test data. Technical parameters 1. Power supply: AC 220V¡À10%, 50Hz. 2. Temperature measurement: (1) Measurement range: ambient temperature~250 (2) Flash point is lower than 104 ¡æ, error is 2 Flash point is higher than 104 ¡æ, error is 6 (3) Resolution: 0.1 (4) Precision: 0.5% 3. Basic parameters: (1) Temperature rising rate: as per GB/T261 (2) Ignition mode: gas flame is 3~4©L 4. Ambient temperature: 10~40 5. Relative humidity: ¡Ü80£¥ 6. Total power consumption: not more than 350 W.
We are supplier and exporter of Paraffin Oil. Light Liquid Paraffin Oil IP is highly purified mixture of liquid saturated hydrocarbons obtained from petroleum and is highly paraffinic in nature. Light Liquid Paraffin oil is transparent & free from fluorescence in daylight. It is colourless, tasteless, and odourless when cold. Light liquid paraffin oil IP highly refined hydro-treated oil has excellent thermal & chemical stability, having high flash point & is soluble in Chloroform & solvent Ether.
Take 100gms of instant jam mix in a vessel and add 150ml of water(For 1 cup of jam mix 1 1/4cup of water). Mix well without lump formation. Boil the mix for 5 mins and reduce the burner level to simmer. Hold it for 5 minutes without stirring or until it reaches setting point of 1040C at low flame. Allow the jam mix to cool. Transfer the mix to sterilized container.
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
product brief introduction Product Introduction Automatic Closed Flash Point Tester used to measure the Closed flash point value of petroleum products.Advanced foreign technology is adopted. LCD TET's pure color touch screen displays the man-machine dialogue interface in Chinese. For parameters such as prevalue temperature oil test label atmospheric pressure and test date it has prompt menu prompt input which is convenient and fast.It is an ideal substitute for imported instruments.Widely used in railway aviation electric power petroleum industry and scientific research departments. Product nickname FlashPoint Tester Automatic Closed Flash Point Tester Closed flash point automatic tester closed-cup flash pointfull-automatictester self-motionClosed flash point tester Closed flash point tester
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
Stick ice lollipop ice filling sealing machine The automatic stick ice filling -sealing machine for lollipop ice is small in size and light in weight, and is made of stainless steel. This machine can produce various beverages such as lollipop ice, milk sticks, fruit milk, fruit cold drinks, and so on. from small capacity to big capacity . Product parameters of one : Voltage: 220/50 (V/Hz) Power: 0.75KW Sealing speed: 2000 cups/hour Filling capacity 0-150ml Specification: 960 * 430 * 330mm (Welcome give thumbs-up, comment,transmit) welcome order !
melting point : -5 C density : 0.919 Refractive index : 1.47-1.476 flash point : 255 C Storage conditions : 2-8C solubility : chloroform: 0.1 mg/mL, clear, very faintly yellow Sesame oil is extremely stable and a rich source of Vitamin A, B, and E. Also, it contains beneficial anti-oxidants. Our Sesame Oil easily subsides into the skin and improves blood circulation and immunity.
Molecular Formula : C6H12O6.H2O Molecular Weight : 198.17 Melting point : 146 Flash point : 224.6 Density : 1.56 Acidity (ml) : 1.2max De-Equivalent : 99.5%Min Oxide, % : 0.0025max Sulphate, % : 0.0025max Insoluble matter in alcohol : Clear Sulfite and soluble starch : Yellow Moisture, % : 9.1max Calcium, % : 0.005max Iron, % : 0.0005max Arsenic, % : 0.000025max Heavy metal,% : 0.00005 max Loss on drying,% : 7.5-9.5 Residue on Ignition % : 0.1max
Product Name: Shea Butter Type: Unrefined Grade: Cosmetic Grade A+ Form: Solid Variety: Vitellaria paradoxa Odor: Nutty aroma No chemicals, No Detergents SPECIFICATIONS FFA:
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
