Scope of application
For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F).
Benefits
- Conforms to ASTM D92 and related specifications
- For flash points above 79 C (175F)
Function characteristics
1,english operating software prompts;
2, with the experimental date, test time parameter prompts;
3, automatic correction of atmospheric pressure and calculated correction values;
4 differential detection, automatic correction system deviation;
5, scan, ignition, detection, print test data computer is done automatically;
6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel;
standard wooden case
Place of Origin: Chongqing, China (Mainland) Brand Name: TOP Model Number: ACD-3000I Power: Electronic Usage: Auto Testing Machine Type: Fully Automatic Oil Acidity Tester Condition: New Method of Display: 7 inch color LCD Testing Range: 0.0005~0.5000mgKOH/g Power supply: 220V±10%,50Hz±5% Environmental Humidity:
Scope Standard ASTM D93, GB / T261-83 and ISO2719-1988 international standards. Features 1, large-screen LCD, friendly user interface 2, also has a fault of Jane function, automatic fault prompts 3, automatic temperature control, automatic lid opening and ignition, automatic print, automatic cooling, automatic air pressure correction is completed and the machine automatically displays the flash point temperature, built-in mini thermal printer to automatically report the test results 4, using USB / 232 communication interface to communicate with the host machine, a centralized management system for easy composition 5, from Germany imported stainless steel temperature sensor for detecting the temperature data is accurate and reliable 6, mechanical moving part of the servo-driven belt drive, work without gaps, low noise, reliable easy to damage, no lubrication maintenance. 7, just set the expected flash point, the instrument automatically in strict accordance with the standard test, the test ends automatically print test results, and there is a tone. Without judgment and do not rely on the operator's proficiency. 8, thermocouple detection sensitivity high detection accuracy, durability and easy maintenance. 9, sample box with built-in cooling mode heating thermostat thermal compound, and the use of German imports whisk Dan Adams compressors, thermostats no lag reliable, easy to damage Technical Parameters 1. Environment: Temperature 0 ~ 60 ? Relative humidity: = 80% 2, Display: large-screen LCD 3, heating rate: less than 50 ? 1 ? / min, higher than 50 ? 2-3 ? / min 4, temperature range: -30 ~ + 80 ?, accuracy ± 1 ? 5, the temperature measurement element: PT100 stainless steel temperature sensor 6, the ignition: gas flame ignition 7, Detection: Automatically detects a flash fire and automatically print test data. 8. Communication: USB / 232 communication interface. 9, cooling system: compressor cooling 10, print: You can print the results of this experiment or any print storage 11, using the power AC220V 50Hz, the total power: 1.5 kw
Power Modules are Point of Load (POL) DC-DC converters integrating controller chips, chokes and I/O capacitors into a single power management package for step-down(buck) applications. The low profile and compact size enables significant saving of board space, high efficiency enhances application performance, and design structure allows automated assembly by standard surface mount equipment
UB2005 SS Light weight guided type fall arrester made of stainless steel In built gravity lock to avoid incorrect use Two deliberate operation require to open and close built inrope guided wheel for tangle free movement with Anti panic feature conforms to ANI Z359.1 For price, specification and other details plese contact us
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Instrumentation circuits cable is used for computer based automatic control system, especially for computer distributed control system, transmission of production device process variable detection, control, interlocking, alarm lamp analog and digital signals, the product has excellent anti-interference performance, long-term working temperature -40~105.
6-35kv medium vollage power cable selection with cross-linked polyethylene insulation and plastic Sheath material, insulation layer USES the three co-extrusion technology, full automatic Change control. Such products, aging resistance, corrosion resistance, environmental stress not only electricity Gas properties and good mechanical properties, and has a simple structure and outer diameter Small, light weight, easy to use and elaborate divide not restricted, Public places such as crowed, place closed space.
Fuji's servo system can be adapted to several types of motion control, from high-function like synchronization and interpolation to simple-function motion control like Point-to-Point positioning. Meanwhile, the improved auto-tuning function and new option like servo operator make the machine control with high-speed and high-accuracy be achieved more easily.