Origin: ukraine 2. Grade: 1, 2, 3 3. Length (cm): 2+ 4. Timber type: pine and spruce Humidity 10-30% Products type: Pine/spruce board Pine/spruce timber Log Firewood Freshly sawn Impregnation antiseptic Delivery condition: cif, cfr, fob We can produce any size, diametr, lenght and other.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
