Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Supplier: Tarpaulin, tarp, pe tarp, frp, grp, grating, pultruded, composite, frp rebar, panel tanks, pond liner, geomembrane, junction box, truck cover, boat cover, tent, camping
Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by resin casting. With its many rectangular and square spaces, it provides two-dimensional homogeneous mechanical characteristics. The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh sizes and thickness - Advantages - Easy to assemble - High Load-bearing capacity - Easy to install and maintain / repair - Durable in harshest environments - Suitable for ventilation and natural lighting
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
(1)SBR glue can keep more than 50% after 28 days NaoH test. (2)Our fiberglass yarn is from Shandong; (3)Certificates to guarantee quality: Usually width/length is: 1X50M, and we can produce big roll: 1X1000M or other sizes as your requirement.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
FRP Rebar is a new kind of composite material, which is glass fiber as reinforcement material, combines with epoxy (resin) and curing agent, then through pultrusion molding process. Fiberglass imparts the strength of the rod, while resin imparts excellent corrosion resistance to harsh chemical and alkaline environments. The products are widely used in construction, transportation industry, coal mine tunnel, parking structures,half coal roadway, slope support, subway tunnel, rock surface anchoring, seawall and dam etc. Main Features Corrosion Resistance: The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. High Tensile Strength: The load is approximately double that of a steel bar with the same diameter; Light Weight: The weight is only 1/4 that of a steel bar with the same diameter.Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time; Anti-static: It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones. The GFRP rockbolt is a fully threaded rodmade of glass fiber and reinforced resin with filling materials such as curingagent and flame retardant, and processed by pultrusion, winding and otherprocesses. The supporting tray nut is the GFRP rockbolt. It is mainly used forthe support of coal mine rock tunnels, semi-coal rock tunnels, coal walls,surrounding rock faces, slope anchoring and other underground projects.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
GFRP rebar with sand coating has better adhesion to concrete. It's available in rods d 4-32mm or in coils of 50-200m.
