Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
FRP Rebar is a new kind of composite material, which is glass fiber as reinforcement material, combines with epoxy (resin) and curing agent, then through pultrusion molding process. Fiberglass imparts the strength of the rod, while resin imparts excellent corrosion resistance to harsh chemical and alkaline environments. The products are widely used in construction, transportation industry, coal mine tunnel, parking structures,half coal roadway, slope support, subway tunnel, rock surface anchoring, seawall and dam etc. Main Features Corrosion Resistance: The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. High Tensile Strength: The load is approximately double that of a steel bar with the same diameter; Light Weight: The weight is only 1/4 that of a steel bar with the same diameter.Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time; Anti-static: It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones. The GFRP rockbolt is a fully threaded rodmade of glass fiber and reinforced resin with filling materials such as curingagent and flame retardant, and processed by pultrusion, winding and otherprocesses. The supporting tray nut is the GFRP rockbolt. It is mainly used forthe support of coal mine rock tunnels, semi-coal rock tunnels, coal walls,surrounding rock faces, slope anchoring and other underground projects.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
GFRP rebar with sand coating has better adhesion to concrete. It's available in rods d 4-32mm or in coils of 50-200m.
GFRP rebar with sand coating has better adhesion to concrete. It's available in rods d 4-32mm or in coils of 50-200m.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass rebar Pulwell manufactures composite r-bars by combining the pultrusion process and an in-line winding & coating process for the outside sand surface. The frp composite rebar is made from high strength glass fibers along with an extremely durable vinyl ester resin. The glass fibers impart strength to the rod while the vinyl ester resin imparts excellent corrosion resistance properties in harsh chemical and alkaline environments. For improved stiffness and mechanical properties a carbon/vinyl ester product is available. Frp rebar significantly improves the longevity of civil engineering structures where corrosion is a major factor. Package in bundles
Fiberglass agricultural stakes Pulwell flexible maintenance free fiberglass stakes allow movement during windy conditions; yet limit the range, to reduce permanent damage during high winds. This natural movement stimulates root establishment and allows for maximum growth. The fiberglass stake includes a uv coating, which allows for maximum life in the field. Unlike bamboo, metal or wood stakes, pulwell fiberglass stakes are: Maintenance free: Will not rust or rot Will not crack due to cold Flex with wind, snow and ice Cost effective: Save - on faster, easier installations Save - on labor costs Save-youµll never have to re-stake trees again Save - on replacement costs Save-has a 25-30 year life expectancy Profitable: Allows max tree growth potential Reduces chafing and cankers Reduces tree damage Bundles
Supplier: Fiberglass composite pultrusions - rods, bars, strips, tubes and profiles used for sporting goods, composite insulators, agricultural stakes, fence post, antenna enclosures, gfrp rebars, plastic pallet reinforcement, curtain rods
