Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass rebar area of application
Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of:
Foundation;
Marine and port facilities;
Reinforcement of concrete tanks;
Repair and strengthening of bearing capacity of brick and reinforced concrete structures;
Road slabs, airfield slabs;
For the production of small architectural forms;
For the road paving and decking of highway bridges;
The implementation of the infrastructure elements in the chemical industries;
Repair of damaged brick and reinforced concrete structures;
Fittings are used for constructions based on gypsum binders;
Construction of swimming pools and industrial pools;
The application of fiberglass fittings in civil and industrial construction is caused by many variables:
Low specific gravity;
High corrosion resistance;
Low thermal conductivity of composite materials;
High strength, several times the strength of steel fittings;
Is a dielectric;
Durability;
As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
Model : FRP plastic cover
Standard: Flexible
Configuration: FRP & Steel frame
Features: In general, the role of the sewage treatment plant is to reuse the factory waste water, living waste water, livestock waste water generated from factory, home and fields and the polluted water through separate treatment process and discharge them to river or sea. For this processing of sewage or waste water in the sewage treatment plant, it is required to install the plastic cover on the top of storage tank to prevent the harmful gas or bad odor generated in the tank that stores the waste water and purifies microorganism by chemical reaction or in the process of waste water treatment in the above tank. The installation of this plastic cover is to remove the harmful gas or bad odor and minimize the physical and mental damage of the related people in the working place or residents.
The machine made FRP sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years.
Specification:
Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm
Colors : Clear, sky blue,light green
Profiles : Over 100 general profiles
Length : Cut as per customers requirement
Density: g/cm 2 1.4 to 1.5
Fiber Content : >25%
Light transmission : 60-85%
Applicable temperature : 40C to 120C
Application areas:
Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens
Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing
Transportation : Bus station, ticket counters, parcel offices, shelters
Agriculture: Farm house, poultry farms,generator rooms, sheds
Features:
Rust proof
High impact strength
Fire retardant
Light in weight
Resistant to all types of weather
Free from problems of cracking, wraping and buckling.
Fiberglass mesh is based C/E-glass yarn as raw material, then coated by alkaline resistant latex.
Featured by high strength and low weight, alkali resistant, good insulation properties and dimensional stability, etc. It is widely used for wall reinforced material, internal wall plaster work, EIFS system, wall defects repair work and so on.
Construction Fiber Glass Mesh Net/ Stone Reinforcement Fiberglass Mesh
Construction Fiber Glass Mesh Net/ Stone Reinforcement Fiberglass Mesh
Feature
High strength and low weight, high tensility.
Alkali resistant, acid resistant, waterproof.
Good insulation properties, good dimensional stability.
Good impact resistance and not easy to be teared.
Thermal preservation, fireproof, soundproof.
Durable and long service life.
Specification
Material: C/E glass fiberglass yarn, modified acrylate copolymer glue.
Mesh size: 4 4, 5 5, 7 7, 8 8, up to 12 12 mm.
Plastic coated layer: 20 g/m2.
ZrO2
Normal: (14.5±0.8)%.
GRC reinforced fiberglass mesh: 16.5%.
TiO2: (6±0.5)%.
Strength retention rate: 90%.
Width
Plaster fiberglass mesh: 0.9, 1, 1.1, 1.2, 1.75 m.
Fiberglass mesh: 5, 10, 15, 20 cm.
GRC reinforced fiberglass mesh: 0.6 m, 0.9 m, 1.0 m.
Roll length: 20-500 m.
Weight
Normal: 30, 45, 75, 145, up to 500 g/m2.
For EIFS: â?¥ 160 g/m2.
Color: white (normal), orange, blue, green, any colors available.
Package: First plastic film, then carton box or according to your requirement.
Construction Fiber Glass Mesh Net/ Stone Reinforcement Fiberglass Mesh
Category
Construction Fiber Glass Mesh Net/ Stone Reinforcement Fiberglass Mesh
In addition to the above points, fiberglass mesh is also used elsewhere. For example: roof waterproofing.
* Reinforce cement.
* Reinforce plastic.
* Reinforce bitumen.
* Reinforce marble.
* Reinforce mosaic.
* grinding wheel base fabric. and other building materials.
The 300g reinforced alkali-resistant fiberglass mesh uses the machine-woven material of moderate-alkali or non-alkali as material and treats with alkali-proof coating. Because the strength and alkali-proof of the product are very good, it plays an important role in insulation system, and it is mainly used for exterior insulationí»s externally applied ceramic tiles 2m below of external walls to prevent crack. Because of its good resistance of chemical corrosion such as acid-proof and alkali-proof and high strength of longitude and latitude, it can distribute the stress on the insulation system of external walls, avoid deformation of the insulation system caused by external impact and pressure, improve the impact-resistance of the insulation. Besides, ití»s easy to install and quality control, it acts to the "soft steel bar" in the insulation system.
Ordinary Specification:
1. Mesh size: 4mm*7mm
2. Weight/m2:300g
3. Length/roll: 50m
4. Width: 1m
5. Color: White (standard), blue, green or other colors
6. Packing: Each roll packed into shrink-wrapping plastic bag, four rolls per one carton.
7. Special specification and package can be ordered and produced according to customers requirement.
We promise the best quality, the best service and competitive price.
My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
Mesh: 5mmX5mm, 4mmX4mm
Weight: 80g----165g/m2
Width: 1m-----2m
Length: 50m - 100m or according to customer's requirement.
Color: white, blue, black, etc.
Special specification as customer's request.
Features: light weight, high strength, high temperature resistance, alkali resistance, waterproof, corrosion resistance, anti cracking, dimensional stability, etc..
Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.
Specifications:
Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm
Weight: 60 - 350g/m2
Width:1-2m
Color: blue, orange, white, yellow, etc.
Packing: shrink film then carton or woven plastic bag.
Features:
í-Excellent alkaline resistance and corrosion resistance
í-High tensile strength and impact resistance
í-Good dimensional stability and deformation resistance
í-Good adhesion with resins and water resistance
í-Temperature stability and flame resistance
í-Soft, flexible and well arranged, simple and easy to apply
í-Resistance to aging
í-Durable, versatile and cost-effective
Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.
Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints.
Features:
1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes
2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc.
3.Ideal material to repair damaged dry wall,cracks and holes
4.Very easy and quick to apply it
5.packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet
