The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars.
For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin.
We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
Fishing boat, business boat, passenger boat, cabin boat, fiberglass boat, FRP boat, yacht, fish speed boat, leisure boat, rowing boat, power boat. Name : Specification Boat Materials : Fiberglass Boat size: 9.8m*2.81m*1.26m Max people : 11+1 Engine : outboard :115 x 2 Waterline : 0.45m above speed : 50km/h
Sodium Silicate is an inorganic chemical wherein its formulations vary depending on amount of Na2O and SiO2. This compound is well known as Water Glass in industries. We mainly supply following types of Sodium Silicate: 1) Sodium Silicate Lumps - Neutral Grade 2) Sodium Silicate Lumps - Alkaline Grade We maintain quality consistency in bulk supplies..
black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality. black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
18455kgs of Fiberglass E GLASS DIRECT ROVING Ref: E6DR17-2400-386T for 9 289kgs + Ref: E6DR24-4800-386H for 9 166kgs TAKE ALL - 20 pallets (25m3) - 18 000 $ EXW FRANCE (59) Roving Direct is a single strand fiberglass filament yarn wound directly onto a spool without twisting. directly onto a spool without twisting. The term "E Glass" refers to the composition of the glass, which is a type of silica-based glass containing boron oxide boron oxide, aluminium oxide and other oxides. E Glass Direct Roving is mainly used as a reinforcement in polyester or epoxy resin composites to increase their mechanical strength stiffness and durability. It is also used in the manufacture of fibreglass products such as boats, storage tanks, swimming pools body panels and reinforcement parts for construction.
Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement. It has the following advantages in relation to metal: 9 times lighter 3 times stronger corrosion resistant significantly accelerates the reinforcement process (knitting on the object is not necessary) no need to put chairs low thermal conductivity Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different. The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors. With this exception, almost the entire range of concrete structures remains: