Find Verified Textile Chemicals Suppliers, Manufacturers and Wholesalers

Sodium carbonate (also named washing soda, soda ash and soda crystals, and in the monohydrate form as crystal carbonate), Na2CO3, is the water-soluble sodium salt of carbonic acid.

Pure sodium carbonate is white, odorless powder that is hygroscopic (absorbs moisture from the air). It has a strongly alkaline taste, and forms a moderately basic solution in water.

Soda Ash has number of uses. Glass manufacturing is the largest application for soda ash, in the form of containers, fiberglass insulation, commercial building, and automotive industries.

Three grades of soda ash produced:

1. Dense Soda Ash: is an anhydrous substance. It forms an important industrial chemical, and widely used in the manufacture of different products.

2. Light Soda Ash: widely used as a pH regulator/ buffering agent in multiple industrial processes.

3. Washing soda: is an anhydrous substance that is produced by combining light soda ash along with additional molecules of water. It is used in soaps and washing detergents to improve their cleaning properties.

Soda ash also used to clean the air and soften water. As environmental concerns grow, demand increases for soda ash used in the removal of sulfur dioxide and hydrochloric acid from stack gases. Chemical producers use soda ash as an intermediate to manufacture products that sweeten soft drinks (corn sweeteners), relieve physical discomfort (sodium bicarbonate) and improve foods and toiletries (phosphates).

PROTECH, our product consists of about 5 organic acid combinations. these organic acids; ascorbic acid, tartaric acid, lactic acid, citric acid, amino acid. It is effective in chelating plant nutrients, dissolving the nutrients in the soil and making them available. Its pH value is below 2 and it has absolutely no caustic properties. Even if it touches your hand, it will not cause any harm. If you give 1.5 liters per decare in each fertilizer application, you will see the results clearly. provides earliness in harvest.

name of our product : calcium carbonate
Product orgin :Turkey
packaging :customers demand
No minimum oder
Hs:283650

Calcium carbonate has a lot of special properties, which makes
it a suitable raw material for a wide range of different
application areas.
The coated calcite produced by REN TECH Corporation and used especially in plastic and cable sectors as a filling material ranges first within the sector as it gives hydrophobic property to the material, makes the chemical paint disperse easily and fit organic environments and keeps the forms from heating up in PVC sector.

Main Usage Areas
1. Paint and Surface Coating
2. Plastic Sector
3. Construction Chemicals Sector
4. Paper Sector
5. Glass Sector
6. Plaster Sector
7. Other Sectors
No Product Code Product Details
1 RenCarb1 1 Micron Calcium Carbonate
2 RenCarb2 2 Micron Calcium Carbonate
3 RenCarb3 3 Micron Calcium Carbonate
4 RenCarb5 5 Micron Calcium Carbonate
5 RenCarb10 10 Micron Calcium Carbonate
6 RenCarb20 20 Micron Calcium Carbonate
7 RenCarb1T 1T Micron Calcium Carbonate (special process applie

1. CaCO Advantages in Paint and Surface Coatings:
It solidifies
It controls the viscosity
It lowers the cost by reducing the consumption of titanium dioxide
It enhances opacity due to its high whiteness property
It strengthens
It increases the impact resistance of the paint film
It gives brightness to the paint
It prevents the paint films to peel off
It provides a smooth film surface
It has an ultra-hiding power
It has a high dispersion feature

2. CaCO Advantages in Plastic Sector:
Some advantages of the calcite over the plastics are as follows:
Depending on different chemical surface coating, it provides dop oil saving.
It provides pigment saving due to its high
whiteness.
It has a flame retardant property due to its chemical structure.
It increases the writability of the packing materials.
It has a positive effect on notched impact strength.
It has a regulatory impact on the viscosity in polymer.
The micronized calcite used as a filling material in plastic sector:
Must control the rheological properties of PVC plastisols,
Must not include heavy metals causing polymers to age,
Must have high chemical purity,
Must have high whiteness for saving expensive white pigments,
Ground particles must not gather together and agglomerate again,
Must not intake high amount of oil,
Must not absorb the flux oil or the chemical substances used in the formulation,
Must not cause machines to be worn,
Must have homogeneity,
Must have a high rate of whiteness for saving expensive white pigments and
dyeability at high filling levels,
Must disperse easily,
Must enhance hardening, the structural properties of the final product, impact
resistance, stability and resistance against ageing,
Must protect against heating up due to its solidifying effect,
Must prevent blocking on broken film surfaces,
Must be scentless, tasteless and non-toxic.

HYDROGEN PEROXIDE 35%, 50%, 60%
HS Code: 284700
Chemical name: Hydrogen dioxide solution
Chemical Formula: H2O2
Packaging: IBC, 35 kg drum, 250 kg drum
Appearance: Pale blue color

Hydrogen peroxide (H2O2) is a chemical compound composed of two hydrogen atoms and two oxygen atoms. It is a clear, colorless liquid that is slightly more viscous than water. Hydrogen peroxide is often used as a mild antiseptic and bleaching agent. It has strong oxidizing properties and is commonly used as a cleaning agent, disinfectant, and as a bleaching agent for hair and teeth.
In its pure form, hydrogen peroxide is unstable and decomposes into water and oxygen gas readily. It is also used in various industrial processes, including the production of chemicals, as a propellant in rocketry, and in the treatment of wastewater. As Ark Global Kimya, we do Hydrogen Peroxide wholesale and export in Turkey

With raw material and the production quality is used CyberwizeTurk natural calcium carbonate with CyberwizeTurk and Kirikkale business facilities in Turkey nanometric calcite and hydrophobic in character nanometric calcite, surface coating and granular plant capacity with paint, glass, plastic, paper, strong in many industries such as construction chemicals With its human resources, R&D investments and logistics network, it continues its journey with determination. In addition to Calcium Carbonate, CyberwizeTurk also supplies Talc, Barite and Titanium Dioxide mines to its suppliers.

CyberwizeTurk is the Home of the Purest and Whitest Calcite Formations in the World!

Solutions :

STRUCTURE
POLYMERS
HOME CARE
PAPER AND CARDBOARD
AGRICULTURE
FARMING
TEXTILE
SOUNDING

#Calcium_Chloride 98% (CaCl2) Typical Properties:

TETRA 94 calciumchloride (CaCl2) is a white, high purity pellet with 94 to 97 weight percent CaCl2.

Physical Appearance: White granola

Specific Gravity: 2.2

Bulk Density: 56 ln/ft3 (900kg/m3)

#caustic_soda_flake widely used inorganic industrial chemical. #Sodium_hydroxide is having certain properties like

#Sodium_hydroxideâ??s chemical formula is NaOH

NaOH molecular weight of 39.997 g/mol

Sodium hydroxide is contain ph of ~12-14

Caustic soda flake , Sodium hydroxide (NaOH) an inorganic compound with following synonyms
Caustic soda
Lye
Sodium hydrate
caustic soda flake widely used inorganic industrial chemical. Sodium hydroxide is having certain properties like Sodium hydroxide's chemical formula is NaOH ,

NaOH molecular weight of 39.997 g/mol

Sodium hydroxide is contain ph of ~12-14

Sodium hydroxide characteristics can be mentioned as

Raw material for various industrial products
Co-product in chlorine synthesis
Strong base
Highly corrosive
Auxiliary chemical
Odorless material

a. Name of product : Caustic soda flake
b. Price of product : 390$ FOB
c. Key Specifications/Special Features : SGS REPORT has been attached
d. Minimum Order Size : 20MT
e. Packaging details: 25kg bag in Jumbo bag & Pallet

HDPE is one of the major thermoplastics and is a widely used type of polyethylene (PE). Its resins include ethylene homopolymers as well as copolymers of ethylene and alpha-olefin monomers such as 1-butene, 1-hexene and 1-octene.

HDPE has higher crystallinity compared to LDPE and LLDPE which results in higher mechanical properties such as stiffness, modulus and tensile strength, higher temperature resistance, improved barrier properties as well as improved chemical resistance to a variety of solvents and chemicals.

HDPE properties can be adjusted by controlling the molecular weight, molecular weight distribution, degree and type of short chain branching and amount of long chain branching to design resins with optimum performance for different end-use applications.

Applications: HDPE is used worldwide in a very large variety of applications such as rigid containers, toys, film products, sheet products, injection-molded articles, pressure and non-pressure pipes, geomembranes, automotive parts, and fuel tanks.

Our Organic Extra Virgin Olive Oil is produced from carefully selected, fully organic olives harvested at peak season and processed using first cold press mechanical extraction. With an acidity level of 0.5%, this exclusive product offers a smooth, rich, and fruity flavor ideal for premium culinary use, dressings, and direct consumption.

The oil is presented in a high-quality glass bottle designed to protect freshness while showcasing the natural golden color of the oil. Its elegant appearance makes it suitable for gourmet markets, high-end retail shelves, and exclusive private label branding.

Each batch is produced under strict hygiene and organic certification standards to ensure consistent purity, aroma, and quality. This product is ideal for buyers seeking a premium, export-ready organic extra virgin olive oil with exclusive packaging.

Acidity (Free Fatty Acids): 0.5%
Certified Organic: Yes
Peroxide Value: <= 20 meq O2/kg
K232: <= 2.50
K270: <= 0.22
Moisture and Volatile Matter: <= 0.2%
Insoluble Impurities: <= 0.1%
Wax Content: <= 150 mg/kg
Smoke Point: 190 - 210 C
Polyphenols: Typically 200 - 450 mg/kg depending on harvest
Color: Natural golden tone
Aroma and Taste: Fruity, smooth, balanced bitterness
Extraction Method: First cold press, mechanical extraction only

Our 2L Extra Virgin Olive Oil is produced from carefully selected olives harvested during peak season and processed using first cold press mechanical extraction. This method preserves the natural aroma, freshness, and nutritional value of the oil. With an acidity level of 0.5% - 0.8%, it offers a smooth, fruity, and well-balanced flavor suitable for both direct consumption and premium culinary use.

Packaged in a durable, light-protective black metal tin, this product maintains its freshness throughout transport and storage. Its elegant appearance and secure sealing system make it ideal for retail shelves, private label branding, and export distribution.

Each batch is produced under strict hygiene and quality control standards to ensure consistent taste, color, and purity. It is a reliable choice for buyers seeking stable, export-ready extra virgin quality in premium packaging.

Acidity (Free Fatty Acids): 0.5% - 0.8%
(Falls under Extra Virgin Olive Oil category according to international standards. Suitable for both culinary use and direct consumption.)
Peroxide Value: <= 20 meq O2/kg
(Lower peroxide value indicates freshness and minimal oxidation.)
K232 & K270 Values:
K232: <= 2.50
K270: <= 0.22
(These UV absorption values confirm the purity and quality of the oil, ensuring it has not been mixed or refined.)
Moisture and Volatile Matter: <= 0.2%
Insoluble Impurities: <= 0.1%
Wax Content: <= 150 mg/kg
Smoke Point: 190 - 210 C
Polyphenols: Typically 200 - 450 mg/kg depending on harvest
Color: Golden-green, natural cold-press color
Aroma and Taste: Fruity, balanced bitterness, mild pungency
Extraction Method: First cold press, mechanical extraction only (no chemicals)

Our 2L Extra Virgin Olive Oil is produced from carefully selected, organically grown olives harvested during peak season. The olives are cold-pressed within a few hours of picking to preserve their natural aroma, freshness, and nutritional profile.
This premium-quality oil offers a rich, balanced flavor with low acidity, making it suitable for both culinary use and direct consumption.

Packaged in a durable, light-protective metal tin, the product maintains its freshness throughout transport and storage. Its elegant appearance and secure sealing system make it ideal for retail shelves, private label branding, and export distribution.

Our production process follows strict hygiene and quality standards, ensuring consistent taste, color, and purity. Each batch is tested and certified according to international food safety regulations, making it a reliable choice for global buyers.

Acidity (Free Fatty Acids): 0.9% - 1.2%
(Falls under Virgin Olive Oil category according to international standards. Suitable for both culinary use and general consumption.)
Peroxide Value: <= 20 meq O2/kg
(Lower peroxide value indicates freshness and minimal oxidation.)
K232 & K270 Values:
K232: <= 2.50
K270: <= 0.22
(These UV absorption values confirm the purity and quality of the oil, ensuring it has not been mixed or refined.)
Moisture & Volatile Matter: <= 0.2%
Insoluble Impurities: <= 0.1%
Wax Content: <= 150 mg/kg
Smoke Point: 190 - 210 C
Polyphenols: Typically 200 - 450 mg/kg depending on harvest
Color: Golden-green, natural cold-press color
Aroma & Taste: Fruity, balanced bitterness, mild pungency
Extraction Method: First cold press, mechanical extraction only (no chemicals)

w1-*Calculation of Energy Value by Atwater Method (kcal/100g - kj/100g) --> 899,4 - 3759,4.
2-*Fat(1) (%) ---> 99,93
3-*Total Sugar Determination (Lane-Eynon) (%). --->. 3-*Total Sugar Determination (Lane-Eynon) (%)
4-*Protein(1) (%) ------> 0.0
5-*Calculation of Carbohydrate Values by Atwater Method (%) ----> 0,0
6 -*Sodium (as Salt)(1)(2) (%). ----> Not detected
1-*Saturated Fatty Acids (%). ----> 17,03

-------------------------------------------------------------------------------------------------------------------------

Free Fatty Acidity: 0.6 Max
Peroxide Value : 11.90
Pesticides : Not Detected
Sensory Properties: It has a unique color, smell and
structure
Amount of Soap: Not Detected
Moisture: 0.05 %
Waxy Substances (Beeswax) Amount (mg/kg) : 121,26
Solvent Residue Determination : Not Detected

Price: We can only give a quote upon inquiries.

Product Origin: Turkey (TR)

Key Specifications: Protects Against Liquids with Chemical Concentration Less than 40%,

Protects Against Solvents,

White 63gr/m Fabric,

Laminated Film Covered Microporous,

Breathable Feature,

Tear, Abrasion and Pilling Resistant,

Fully Sits on the Body Thanks to Elastic Waist and Wrist Parts,

Antistatic.

Standards: EN1149-5:2008, EN ISO 13982-1:2004 A12020 TYP 5-B, EN130342005-A1:2009 TYP 6-B, EN1073-2:2002, EN141262003/AC:2004

Packaging Details: 50 in one package, all individually packed

GROSS: 54.500 KG HEAVY SODA ASH
Place of delivery Kocaelispor Turkey
***If you do not like our product, your money will be refunded.Our product is guaranteed.***

Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34

Chemical Specifications :
* Alkalinity (as Na2Co3)% : 99.2% Min
* Chloride in terms of NaCL : 0.4% Max
* Iron Content: 0.002% Max
* Insolubility in water : 0.1 % Max
* Na02% (if its need): 58% Min

Physical Specification:
* Bulk Density (Dense), gr/cm3 : 0.85 - 1.1

Appearance : (Mesh Size)
* Below 20 : 10% Max
* 20~30 : 25% Max
* 30~100 : 60% Min
* 100~140 : 7% Max
* 140 above : 3% Max

Product Usage :
* Soda Ash Dense is widely used Glass Industries
* Soda Ash Dense is used as Chemical Intermediates
* Soda Ash Dense is used for Water Treatment.
* Soda Ash Dense is used for Flue Gas Desulfurization
* Soda Ash Dense has wide usage in Pulp and paper industry.

Price and Minumum Quantity
Price FOB in USD: 200Minimum Order Qty: 54.500 Metric Tonnes

Production Capacity: 10000 Mt Per MonthPackaging: 1250 Kg Jumbo Bags

GROSS: 54.500 KG HEAVY SODA ASH
Place of delivery Kocaelispor Turkey
***If you do not like our product, your money will be refunded.Our product is guaranteed.***

Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34

Chemical Specifications :
* Alkalinity (as Na2Co3)% : 99.2% Min
* Chloride in terms of NaCL : 0.4% Max
* Iron Content: 0.002% Max
* Insolubility in water : 0.1 % Max
* Na02% (if its need): 58% Min

Physical Specification:
* Bulk Density (Dense), gr/cm3 : 0.85 - 1.1

Appearance : (Mesh Size)
* Below 20 : 10% Max
* 20~30 : 25% Max
* 30~100 : 60% Min
* 100~140 : 7% Max
* 140 above : 3% Max

Product Usage :
* Soda Ash Dense is widely used Glass Industries
* Soda Ash Dense is used as Chemical Intermediates
* Soda Ash Dense is used for Water Treatment.
* Soda Ash Dense is used for Flue Gas Desulfurization
* Soda Ash Dense has wide usage in Pulp and paper industry.

Price and Minumum Quantity
Price FOB in USD: 200Minimum Order Qty: 54.500 Metric Tonnes

Production Capacity: 10000 Mt Per MonthPackaging: 1250 Kg Jumbo Bags

Surgical Instrument and Endoscope Ready to use Disinfectant
Qty in Box: 4
Box Qty in Pallet: 30
Total Qty in Pallet (pcs): 120
Gross Weight in Euro-Pallet (kg): 640
Net Weight in Euro-Pallet (kg): 545
Unit Price: 16,25 USD (EXW Kirikkale, Turkey)

Usage Area and Purpose:
hydroxy PAA, is a product containing a combination of hydrogen peroxide and peracetic acid. Medical and surgical instruments, including MIC instruments, are ideal for high-level disinfection of endoscopes, anesthetic materials and heat-resistant and non- durable surgical instruments and other materials. Endoscopic washing devices and manual use are suitable. There is no harm in the release to the environment.

Usage:
hydroxy PAA, Activator is added and ready for use. Immerse the endoscopes, anesthetic materials and heat-resistant and non-durable surgical instruments and other materials, including the MIC instruments, into the endoscopic washing device or the hydroxy PAA prepared in the decontamination cuvette. Be sure to completely immerse the ingredients in the solution. Wait during the duration of the effect. Materials should be pre- cleaned prior to hydroxy PAA disinfection. Not suitable for copper and brass materials. Shelf life at room temperature is 2 years. The opened product should be used within 6 weeks. The hydroxy PAA in use should be changed according to the contamination condition. This period should not be more than 14 days. The effectiveness of the product is monitored by MEK Control strips.

Formulation Type:
Liquid

Active Ingredients:
Contains hydrogen peroxide, peracetic acid, non-ionic surfactants, stabilizers, anti-corrosion agents.

hydroxy PAA, corrosion, deformation and discoloration tests were carried out by the accreditation body

Activity Reports :
EN 2586, EN 13227, EN 14561, EN 13624, EN 14348, EN 14562, EN 14563, EN 13704, EN 14476

Abc 750 high temp is a one part acetoxy high temperature resistant silicone sealant which cures with atmospheric moisture to form a rubberlike seal.
Properties:

* very easy application

* high temperature resistance. (continously 270° c, intervals 315°c)

* stay permanently elastic after curing.

* cures with atmospheric moisture.

* resistance to water, ozone, uv and chemicals.

Applications.

* between metals pieces.

* in car ; gasket in differential gear cover, motor cover and carburator cover

* producing of electrical house instruments

* gaskets in pumps and motors

* sealing in heating systems

* sealing around termostats



Packing:

Cartridges 350 g.(30 pcs. In a box) and 50 g. Aluminium tubes



Colors:

Red, blue, black


Min. Order quantity 3000 piece/pieces


Cartidges 310 ml(30pieces in a box) and 50 gr aluminium tubes

Polyurethane foam is a one component, self- expanding, ready to use . It has a two type

Properties:

* excellent adhesion on most materials (except pe/pp)

* high thermal and acoustic isolation

* very good filling capacity

* excellent mounting ability

Technical properties:

* base : polyurethane prepolymere

* curing system :moisture cure

* skin formation : approx. 10 min.

* spesific gravity : 23±3 kg/m3

* ready-to-cut time : 15-20 min.

* ready-to-bear time : 5-8 hours

* can temperature : min.50c

* temperature resistance : -400c until +1000c (cured)

* tensile strenght : 9 n/cm2

* elongation : 25%

* shear strenght : 5 n/cm2

* compressive strenght : 4 n/cm2

* fire properties : b3 (din 4102)

Applications.

* assembling and sealing of window and doorframes

* filling of cavities

* sealing of all openings in roof constructions

* creation of a soundproof screen

* substrate : all substrates except pe, pp
* state of surface: clean, free of dust and grease

* preparation: moistening of the surfaces improves adhesion, curing and

Cellular structure

Application method: shake the can approximately 20 times before use



Packing:

Aerosol cans 750 ml , 860 gr(16 pcs in a box)

Colors: -



Shelf life:

12 months


Min. Order quantity 1 pallet/pallets


750 ml 860 gr