Hammer Mill
Taixing Expansion Marine Equipment Co., Ltd., (EME, stock Number: 691692), has extensive knowledge and expertise in designing and manufacturing deck machine like towing winch, mooring winch, anchor windlass, capstan etc for barge, container vessel, tug, MPV, oil tanker, scientific exploration ship, the Navy vessels, and associated deck equipment as bollards, warping rollers, chocks, fairleads, anchors and chains. For every single type and size of vessel, EME provides deck plans for efficient and effective anchoring and mooring operations.
We are the leading manufacturer and exporter of Ophthalmic Surgical Knife / Blades which are produced by our experts and experienced team by our latest technologies machinery ,for more details please contact at ( info (at ) amarinstruments dot com
Edged board and coniferous timber. The price depends on the required size and place of delivery (about 160-190 euros).
FDR-1901 Automatic micro carbon residue analyzer Scope It conforms to GB /T 17144, ISO 10370 and ASTM D4530 standards. The measure range of carbon residue is 0.10% (m/m) ~ 30.0% (m/m). The measurement results of this instrument for carbon residue value of more than 0.10% (m / m) of petroleum products is equivalent to the measurement results of Conradson Carbon method (GB/T 268, ASTM D189). This instrument is also applicable to the determination of carbon residue of less than 0.10% (m / m), the composition of the distillate petroleum products. For such products, first, prepare 10% (V/V) distillation residue by GB/T 6536(ASTM D86) method, and then use this instrument to measure it. Features 1, the instrument adopts the program automatic temperature control, automatic constant temperature system 2, the instrument adopts the automatic switching flow, convenient and quick 3, the instrument uses a one button operation, the whole test process can be fully automated 4, the instrument is used to protect the program, the test process and the phenomenon of abnormal temperature in the furnace after the instrument will automatically stop and alarm 5, the instrument adopts the stainless steel air guide pipe exhaust emissions, low carbon, environmental protection 6, the instrument adopts the prompt system, the end of the experiment, automatic alarm Technical Parameters 1, the combustion chamber temperature range: room temperature ~ 500 2, the combustion chamber temperature accuracy: 500 ± 2.0 ; thermostat for 15min 3, the error of the set time:
FDR-2001 Petroleum products and additives mechanical impurities analyzer Scope This instrument conforms to the standards GB/T511. It is suitable for the determination of all kinds of light oil, heavy oil, lubricating oil and additives in petroleum products. Features 1, the instrument adopts the pre heating, testing and integration of structural design, reasonable structure, beautiful appearance, reliable quality. 2, the circuit uses the temperature control table to control the electric heating board temperature, the heating plate temperature is constant temperature and controllable, in order to meet the needs of the test. 3, the instrument uses a solid state voltage regulator to adjust the input voltage, so as to control the size of the heating power, to achieve the purpose of heating insulation funnel. 4, the filter device is connected with the suction filter by the vacuum pump, it can measure the sample which is difficult to filter. Technical Parameters 1 Power supply: AC 220V ± 10%, 50Hz. 2, water bath heating power: 1000W. 3, the water bath temperature range: room temperature ~90 adjustable. 4, the water bath temperature display: LED digital display. 5, water bath temperature control accuracy: ± 1 . 6, the funnel temperature range: room temperature ~90 adjustable. 7, the funnel temperature display: LED digital display. 8, the funnel temperature control accuracy: ± 2 . 9, Dimensions: control box: 390 (L) 260 (W) 590 (H); Water bath box: 90 (L) 290 (W) 370 (H). 10, Ambient temperature: 35 . 11, relative humidity: 85%. 12. Total power consumption: less than 1200W.
FDR-2271 Automatic acid and base tester of petroleum products Scope Compliance with SH / T 0251 "Determination of base number of petroleum products (perchloric acid potentiometric titration)" and GB / T 7304 "Petroleum products and lubricants and values assay (potentiometric titration)" standard experimental requirements Features 1. Computer control system, special software Chinese window interface, mouse, keyboard operation, man-machine dialogue, easy to understand. 2. It can display the potential curve (E-V), the first derivative curve (dE / dV) and the electrode potential (E), the titration volume (V), the titration result and so on. 3. The instrument uses the potentiometric titration method to automatically determine the end point of titration, and automatically calculate the results. 4. The instrument has pre-titration, the default end titration, blank titration, manual titration and other modes, can also be based on user experiments to create their own dedicated mode to meet the different experimental requirements. 5. Titration system using a corrosion-resistant materials, can be a variety of titration reaction. Selection of different electrodes can be carried out: acid-base titration, redox titration, precipitation titration, complex titration, non-aqueous titration and other titration and pH measurement. 6. Automatic cleaning, automatic rehydration, automatic value plus liquid. Technical Parameters level: 0.05 1, measuring range: pH: (0.00 ~ 14.00) pH mV: (- 1800 ~ 1800.0) mV Temperature: (- 5.0 ~ 105.0) ° C 2, Resolution: pH: 0.01pH mV: 0.1mV Temperature: 0.1 ° C 3, the basic error: pH: ± 0.01pH ± 1 word mV: ± 0.03% FS Temperature: ± 0.3 ° C ± 1 word 4, Burette capacity Tolerance: 10ml Buret: ± 0.025ml 20ml Buret: ± 0.035ml 5, Burette resolution: 10ml Buret: 1/10000 20ml burette: 2/10000 6, burette infusion or infusion rate: (50 ± 10) s (Buret full degrees) 7, titration analysis Repeatability: 0.2% Titration control sensitivity: ± 2 mV 8 Stability: (± 0.3mV ± 1 word) / 3h 9, power source: AC (220 ± 22) V, (50 ± 1) Hz
FDR-2401 Saybolt colorimeter Scope Saybolt colorimeter can measure refined petroleum products, including a set of matching samples and equipped with optical indicator of standard tube. In the same light source sample with standard color comparison. Reduce the liquid column height of the sample until the sample was significantly lighter than the standard palette of colors, and use the chart on the instrument to convert Saybolt color of height. Three standard color glass on - position color standard pipe may conveniently be replaced swatches. After paraffin Saybolt colorimeter is equipped with a heater for the determination of paraffin, during the test, it is not flowing like melted wax. Sample tube has a 200W chrome steel strip heater, with a hinged lid to maintain the heat evenly. Aluminum heater with a 50W fuel element is kept molten wax-like state. Affiliated variable transformer can be used to regulate the temperature of the sample. Optical observation instrument and shelves are fully insulated with a heater. Test tube assembly with a heat-resistant fiber handle. Features 1, in line with GB / T3555, ASTM D156; DIN 51411; FTM 791-101; NF M 07-003 and related specifications 2, three color standard pipe (Three-position color standard turret) 3, This instrument can test non liquid wax and liquid petroleum products 4. This instrument can measure Saybolt Color of refined petroleum products. Includes a set of matched samples with an optical observer and standard tube assemblies. 5, the key components imported accessories. 6, compact structure, well-made. 7, easy operation and flexible. 8, test data is accurate, fast, at a glance. Technical Parameters 1, paraffin Saybolt colorimeter 220-240V, 50/60Hz 2, the entire thickness of standard color (3) 3, semi-thick standard color (1) 4. Making the Saybolt color number and column height table sample (1) 5, the day light: 110-240V 6, frosted bulb: 60W, 220V 7, variable transformer: 220-240V
FDR-2501 Kerosene smoke point tester Scope Kerosene smoke point tester is based on the standard GB / T382-83 (91) "Determination of the smoke point of kerosene" design and manufacture. The maximum height for the determination of the lamp with kerosene and jet fuel smoke point, that the sample in a standard fixture, smokeless flame under specified conditions of, expressed in millimeters. Features 1, kerosene smoke point tester uses millimeter scale background, you can clearly read the data 2, the entire instrument is compact structure, complete 3, kerosene smoke point tester using plug-type structure, more convenient to replace the wick 4, kerosene smoke point tester using a special glass observation window, easy to operate 5, kerosene smoke point tester simple operation, high measurement repeatability Technical Parameters 1, the scale: ruler should on the black glass with white flags, their white or black stripes central 2 mm will be divided into bisecting vertical ruler. Ruler measuring range should be 50 mm, 1 mm division. Every 10 mm on the digital standard, with each 5 mm long marking. 2, wick catheter: Top wick catheter should be exactly at the same level with the zero on the scale. 3, the lift base: total distance of not less than 10 mm stroke, moves smoothly and evenly. 4, reservoir oil: oil reservoir mainly by oil storage body, wick pipes and air ducts, etc., whose critical dimensions conform to GB / T382, oil storage body diameter size 21.25 ± 0.05, length of 109.0 ± 0.05; wick tube diameter 4.7 ± 0.05, length of 82.0 ± 0.05; air duct diameter size 3.5 ± 0.05, length of 90.0 ± 0.05.
FDR-2801 Jet fuel solid particle contamination tester Scope This instrument conforms to ASTM D2276 M1L-T-5624N standards. It can detect contaminants propellant solid particles. Under specified conditions, the samples were filtered glass sand core filtration devices, increase the weight on the microporous membrane filters is the total sample contaminants. Features 1, the instrument for the desktop, stainless steel control panel, ceramic coating; 2, digital timer, Fengming alarm; 3, the evacuation time can be set arbitrarily; 4, low noise pump; 5, the standard glass fittings, conforming to ASTM standards; 6, using molding and metal clamp; Technical Parameters 1. Filter: vacuum pumping 2, vacuum degree: 80KPA 3, machine power: 500W 4, the working units: a standard filtration system 5 Power supply: AC220V / 50Hz 6. Timing: Digital timer
FDR-3001 Sulfur content of petroleum products tester (lamp method) Scope Standard: ASTM D1266 Sulfur content of petroleum products tester (lamp method) is the People's Republic of China in accordance with the requirements of standard GB/T380 "Determination of sulfur content in petroleum products (lamp method)" under the design and manufacture of this instrument is suitable according to GB/T380 standard The method of measurement prescribed Reid vapor pressure not greater than 600 mm Hg light petroleum products (gasoline and kerosene) of sulfur content. Features 1, glassware easy loading and unloading. 2, the combustion lamp can be adjusted up or down according to need. 3, the gas flow rate of each gas path can be adjusted independently. 4, can be sucked sample gas after combustion, while stirring the test solution from the dual role. Technical Parameters 1 Power supply: AC220V ± 10%; 50Hz. 2, the number of samples: independent five groups, each group can test separately. 3, electromagnetic pump: master electromagnetic pump independent five groups vacuum exhaust volume can be adjusted independently, auxiliary electromagnetic pump (mixing pump) a group. 4, vacuum extraction adjustment: stepless adjustment potentiometer. 5, Enlightening regulation: EEP each group can be independently adjusted up and down to adjust the range of not less than 15 mm. 6, structural materials: countertops and stainless steel tube holder. 7, cuvette holders: each group independently adjustable cuvette holder, adjustable range of not less than 20 mm. 8, the ambient temperature: -10 ~ 40 . 9, relative humidity: 85% 10. Power consumption: less than 150W
FDR-3301 UV fluorescence sulfur analyzer Scope This instrument is a new generation of precision instruments developed in combination with the principle of UV fluorescence measurement and computer technology. It is the most advanced total sulfur analyzer in China. It conforms to ASTM D5453, SH / T 0689 and other standards. The instrument complies with national refined oil Arbitration standard for determination of total sulfur content. It widely used in the determination of crude oil, hydrocarbons and engine fuel, LPG, plastics, petrochemical products, food and so on. The instrument uses the principle of ultraviolet fluorescence measurement, when the sample is introduced into the pyrolysis furnace, the sample undergoes the cracking oxidation reaction, in which the sulfide is quantitatively converted into sulfur dioxide, carried by the carrier gas, the moisture is removed by the membrane dryer, (SO2 *), when the SO2 * return to the steady state of sulfur dioxide emission fluorescence, the release of energy received by the photomultiplier tube, and then amplified by the micro-current amplifier, and then to the SO2 * The amount of sulfur dioxide is proportional to the total sulfur content in the sample, so the total sulfur content in the sample can be determined by measuring the luminous intensity of the sample. Features 1, computer control, it can achieve man-machine dialogue, data and peak shape can be automatically stored and printed. 2, the operating software and LIMIS system can be connected to achieve automatic data transmission. 3, the instrument uses a new quartz cracking tube, which can increase the injection volume, reduce measurement error, improve the sensitivity of the instrument, higher repeatability. 4, cooling fan can automatically turn on and off, so you can save the trouble of waiting for shutdown, saving time and effort. 5, the darkroom system uses the latest technology, the key components of imported detection components to improve the instrument's detection accuracy and sensitivity. 6, the instrument uses imported film dryer to absorb water, eliminating the need to replace the frequent trouble of magnesium perchlorate, while reducing the leakage problem. 7, the instrument uses computer-controlled temperature, improve the accuracy of the instrument temperature control, and difficult to over-temperature. 8, the instrument uses air-cooled instead of water-cooled, saving water resources. 9, the user can retrieve the existing calibration curve, after use the standard sample to calibration it, you can analysis sample. Technical Parameters 1, standards: ASTM D5453, SH/T 0689 and other standards 2, measuring range: 0.2mg / L ~ 10000mg / L ~ percentage 3. Air source: Argon: 99.999%, Oxygen: 99.999% 4, sample status: solid, liquid, gas (with corresponding injector) 5, temperature range: room temperature ~ 1100 ± 3 6, repeatability error: 0.2mg / L X
FDR-3561 Octane analyzer (motor / Research Method) Scope Applicable "Gasoline Octane machine assay (MON)" GB / T503, "Determination of the gasoline octane engine (research)" GB / T5487, and ASTM D2700, ASTM D2699 Features 1, using the FLD modular design, the motor method and research method can switch the two conditions; 2, the instrument supports interpolation commentary oil operation, the test results can be quickly calculated; 3, SE air filtration systems configured to provide standards-compliant clean, dry, heated gases; 4, professional knock sensor signal FDT-DS uses the industry standard design, more stable and reliable; 5, configure a special Friends knock detection system to ensure zero for knock signal, magnification, broadening adjust stability, precision instrument repeatability is less than 0.2 / R octane. 6, using magnetic induction ignition, the test of detonation ignition time more precise. 7. Configure FAD security system for emergency protection under abnormal conditions, protect the safety of operating personnel; 8, the device uses user-friendly design, customers can demand, self-matching low-temperature test tank, and cooling water circulation system. Technical Parameters 1, measuring range: 50 to 100 octane 2, the compression ratio range: 4: 1 to 12: 1 3, cylinder bore: 65mm 4, piston stroke: 100mm 5, the engine speed range: 900 ± 9r / min (MON), 600 ± 6r / min (research method) 6, the machine rated power: 8000W 7, Power: 380 ± 10% VAC, 50 ± 1Hz, 220 ± 10% VAC, 50 ± 1Hz
FDR-3571 Octane analyzer (Motor / Research Method) Scope The octane number of gasoline (petrol label) is a contract value, which means the antiknock properties of gasoline, it is the most important quality index of gasoline vehicles, it is one of the core content in oil specification analysis. It is determined by comparing with standard fuel in the standard engine test under specified operating conditions. It can conform to the ASTM D 2699, ISO 5164, ASTM D2700 standards, there are two method: Motor method and Research method. Features 1, the instrument uses a computer touch screen operation, human-friendly communication interface 2, the screen interface can display real-time experimental parameters of the indicators change, at any time monitoring 3, automatic & jog operation adjust the compression ratio, with a limit protection 4, the instrument can use two kinds of operation methods: interpolation and compression ratio method 5, the instrument can automatically generate test reports, and can automatically print the results 6, the instrument is equipped with SE air filtration system, it can provide standard, clean, dry and constant temperature gas; 7, the professional knock signal sensor FDT-DS uses the industry standard, it is more stable and reliable; 8, the instrument is equipped with a special Friend Company's knock detection system, which ensures that the knock signal of the zero, magnification, stable regulation of stability, the repeatability and precision of the instrument are less than 0.2 / R octane number. 9, it uses a magnetic induction ignition, so that the ignition time in the test is more accurate. 10, the instrument is equipped with FAD security protection system, which is used for emergency protection under abnormal conditions to protect the safety of operators; 11, the instrument uses a user-friendly design, customers can also be based on demand, self-matching low-temperature test tank and cooling water circulation system. Technical Parameters 1, measuring range: 50 to 100 octane number; 2, there are two method: Motor method and Research method, it can improve the user's investment effectiveness; 3, cylinder bore: 65mm; 4, the cylinder stroke: 100mm; 5, engine displacement: 0.33L; 6, the compression ratio range: 4: 1 to 12: 1; 7, the engine speed range: 900 ± 9r / min (Motor method) 600 ± 6r / min (Motor method) 8, the machine rated power: 8000W 9, power supply: 380 ± 10% VAC, 50 ± 1Hz 220 ± 10% VAC, 50 ± 1Hz
Item No.:Â M00302 Specification:Â 3" 4" 6" 9"
Square File Item No.: M00409 Specification: 5" 6" 8" 10" 12" 14"
Soft face hammer Item no.: m00644 Specification: 25mm 30mm 35mm 40mm 50mm 60mm
Hand riveter
We are the reputed Water Based Primer supplier and importer of MICA R-1509-C in India - Contact us now to Get a Quick quote for Water-based PEI primer for bonding PE to clay-coated surfaces in India by MICA Corporation. MICA Water- based Primers High performance, extrusion primer for inks, coatings, and adhesives. -
Carbide snow plow blade inserts 25 degree standard snowplow blade inserts 40 degree standard snow plow blade inserts Bull nose snowplow blade insert Tall bull nose snowplow blade inserts Our company manufacture many different sizes and different shapes of carbide blades for snow plough insert.HIP Sintered, excellent properties, as per the clients?requirements, at competitive prices. We can send you some pieces of samples for your testing. Please contact me for more detailed information. Thanks in advance.
