Titanium bipolar electrolyser plate in electrolysis is a special electrode for electrolysis, usually made of pure titanium. In electrochemical processes, electrodes are usually divided into anodes and cathodes, each responsible for the flow of electrons and the flow of ions. A bipolar plate is an electrode that has both anodic and cathodic properties. In electrolysis, titanium bipolar electrolyser plates are usually used in the fields of electroplating, electrolytic preparation and water treatment. They can withstand high voltage and high current density, but also have good corrosion resistance, which allows them to be used in harsh environments such as strong acid, strong alkali, high temperature and high pressure. Parameters Material: Gr1 titanium Size: Customized according to the drawing Application: Fuel cell Features 1.Good electrical conductivity: Titanium bipolar plates have excellent electrical conductivity and can withstand high voltage and high current density, thus effectively promoting electrochemical reactions. 2.Good corrosion resistance: Titanium bipolar plates have good corrosion resistance and can be used in harsh environments such as strong acid, strong alkali, high temperature and high pressure, and are not easily corroded and worn. 3.Good mechanical properties: Titanium bipolar plates have high strength and rigidity, can withstand large forces and pressures, and are not easily deformed and broken. 4.Lightweight: Titanium bipolar plates have a lower density and are a lightweight material that can reduce the weight of the entire electrolytic cell and improve overall efficiency. Methods of coatings for Ti bipolar plates A number of methods are used to deposit coatings onto metallic bipolar plates. Processes include physical vapor deposition techniques such as electron beam evaporation, sputtering and glow discharge decomposition, chemical vapor deposition techniques, and liquid phase chemical techniques such as electroplating and electroless deposition, chemical anodizing/oxidation coatings and painting.
Platinum-coated porous titanium plates are essential components used in electrolyzers for diverse industrial applications such as hydrogen production, water treatment, and energy storage. These plates play a critical role in facilitating efficient and reliable electrochemical reactions. Specifications: Material: porous Titanium plate Coating: Platinum (usually 0.2-5 microns thick) Porosity: 30%-40% Thickness: 0.6-20 mm Dimensions: Customizable based on specific electrolyzer requirements Surface Area: Varies based on design and application, usually 50-100 cm�² Why is platinum used as a coating material? Platinum is highly resistant to corrosion and possesses excellent catalytic properties, making it ideal for enhancing electrochemical reactions. It ensures long-term stability and efficiency of the electrode, resulting in improved performance and durability of the electrolyzer. What are the advantages of using porous titanium plates? The porous structure of titanium plates increases the available surface area for reactions, allowing for greater contact with the electrolyte. This enhances mass transfer and promotes efficient gas diffusion, leading to faster reaction rates and improved overall electrolyzer performance. Can the dimensions of the plates be customized? Yes, the dimensions of platinum-coated porous titanium plates can be tailored to suit specific electrolyzer designs and requirements. Customization allows for compatibility with different system sizes and configurations.
Product Introduction Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has a wide range of applications in hydrogen industry. In the hydrogen industry, these plates are used for hydrogen purification and separation, and they are an important component in many hydrogen-based technologies. Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has good electrical conductivity, gas permeability, liquid permeability and chemical stability. In electrochemical systems such as fuel cells, the application of porous titanium plates can improve the energy conversion efficiency and stability of electrochemical systems, thereby promoting the development and application of electrochemical systems. Parameters Material: Gr1 titanium powder Purity: 99.6% Thickness:0.6mm Size: customized Application: PTL GDL in PEM electrolyzer Porosity: 35% Pore size: 20um Features High conductivity: Titanium is a good conductive material, and the porous titanium plate has excellent conductivity and can effectively transport electrons. High gas permeability: The porous titanium plate can control the parameters such as pore size and porosity to make it have high gas permeability, so that it can effectively transmit gases such as hydrogen and oxygen. Good liquid permeability: The pore structure of the porous titanium plate can control the transmission of liquid, so that it has high liquid permeability. High chemical stability: Titanium has good chemical stability and can operate stably for a long time in acidic or alkaline environments. Applications Hydrogen energy industry Gas filtration Oil and liquid filters Muffler Fuel Industry Catalyst filtration Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer's designated place without damage.
Mixed-metal Coated Titanium Anodes for Trivalent Chromium Plating is a material used as an anode in an electrochemical reaction, and it is usually made of pure titanium or titanium alloy. During the electrochemical reaction, Mixed-metal Coated Titanium Anodes for Trivalent Chromium Plating absorb electrons and are oxidized, forming an oxide coating on its surface, commonly known as titanium anodic oxide (TAO). Titanium anodized layer has many useful properties, such as high hardness, excellent corrosion resistance, wear resistance, etc., which makes it widely used in many applications. Among them, the application of coated titanium anode is particularly prominent. Parameter Substrate material: titanium Grade 1, titanium Grade 2 Dimensions: customer drawing welcomed Shape: Plate/Tube/Rod/Mesh shape MMO coating: Ir-Ta coating Coating thickness: 0.2-12 m Temperature:
With the rapid advancement of technology, particularly in aerospace and other related industries, the demand for titanium metal has significantly increased. However, this has also resulted in a substantial amount of titanium metal scrap. As a result, the recovery of titanium metal scrap has become crucial in conserving resources and reducing costs. Titanium scrap comes from various sources, such as during the production of sponge titanium. The upper skin, bottom, and sides of sponge titanium may be contaminated by impurities like iron, chlorine, oxygen, and nitrogen. These impurities make the titanium scrap unsuitable for manufacturing and must be recycled. Additionally, titanium ingot casting and processing titanium materials into titanium products also generate titanium scrap. To recycle titanium metal scrap, the following methods can be employed: High-quality uncontaminated titanium scrap can be utilized as an additive for smelting titanium ingots or mixed with sponge titanium to produce titanium blocks. Waste titanium sponges, heads, and scraps can be utilized as alloy additives in the ferrotitanium industry or raw materials for titanium powder, depending on their purity and composition. Waste titanium powder can be utilized as deflagration agents in the pyrotechnic sector, additives in the processing of aluminum, and raw materials for titanium products made using powder metallurgy. Titanium scrap with numerous impurities can be processed into high-titanium iron. What is the process for recycling titanium scrap? The process of recycling titanium scrap typically involves the following steps: Collection and sorting: Titanium scrap is collected from various sources, such as manufacturing facilities, aerospace companies, and medical facilities. The scrap is then sorted based on its composition and quality. Cleaning and preparation: The titanium scrap is cleaned and prepared for processing. This may involve removing any impurities, such as oil or dirt, and cutting the scrap into smaller pieces. Melting: The titanium scrap is melted in a furnace at high temperatures. This process helps to separate titanium from any other metals or materials that may be present. Refining: The melted titanium is refined to remove any remaining impurities and improve its quality. This may involve adding other materials, such as aluminum or vanadium, to improve the properties of the titanium. Forming: The refined titanium is then formed into various shapes and products, such as sheets, bars, or wire. These products can be used in a wide range of applications, including aerospace, medical, and automotive industries.
Titanium foil is a thin sheet of titanium metal typically less than 0.5 millimeters thick. Titanium foil is produced through a process known as rolling, which involves passing a titanium ingot through a series of rollers to gradually reduce its thickness. The resulting titanium foil is typically very thin, with a thickness ranging from a few micrometers to a few millimeters. Titanium foil is valued for its high strength-to-weight ratio, excellent resistance to corrosion, and biocompatibility with the human body. What is titanium? Titanium is a relatively new type of metal that exhibits unique properties which are affected by the presence of impurities such as carbon, nitrogen, hydrogen, and oxygen. The� impurity content� in pure titanium is typically less than 0.1%, resulting in a metal with low strength but high plasticity. For industrial purposes, titanium with a purity of 99.5% is commonly used. This grade of titanium has a density of 4.5 g/cm�³, a� melting point� of 1800â??, and a thermal conductivity of 15.24 W/(m. K). It also has a� tensile strength� of 539 MPa, an elongation of 25%, a� section shrinkage rate� of 25%, an� elastic modulus� of 1.078 �? 10â?µ MPa, and a hardness of HB195. Parameter Material: titanium Grade: Gr 1, 2, 5(6Al-4V), 7(Ti-0.15Pd), 9(3Al-2.5V), 12, 23(6AL-4V ELI), 15V-3Al-3Sn-3Cr Thickness: 0.01-0.1mm Width: 10-500mm, customized Length: 10-1000mm, customized Processing Service: Bending, Welding, Decoiling, Cutting, Punching Standard: ASTMB265 Ti Content (%): 99.6% Features 1. High strength-to-weight ratio: Titanium is known for its high strength-to-weight ratio, which means that it is strong but also lightweight. This makes it ideal for applications where weight is a critical factor, such as aerospace and sporting goods. 2. Excellent corrosion resistance: Titanium has excellent corrosion resistance, making it useful in harsh or corrosive environments, such as marine or chemical processing applications. 3. Biocompatibility: Titanium is biocompatible, which means that it is not harmful to living tissue or the human body. This makes it useful for medical implants such as dental implants, joint replacements, and pacemakers. 4. Low thermal expansion: Titanium has a low coefficient of thermal expansion, which means that it does not expand or contract significantly with changes in temperature. This makes it useful in applications where dimensional stability is important, such as precision engineering.
Titanium sponge is an elemental form of titanium that typically appears as light grey particles or a sponge-like mass. It serves as the fundamental raw material for the production of titanium materials, titanium powder, and other titanium products. Sponge titanium is obtained by transforming titanium ore into titanium tetrachloride, which is then reacted with metallic magnesium to yield a porous, sponge-like mass. During the reduction and distillation process, impurities can be introduced into the titanium sponge lump due to a variety of factors, including temperature, pressure, furnace condition, and segregation. According to the Chinese standard GB/T 2524, titanium sponges can be classified into seven grades, ranging from MHT 95 to MHT 200, with the number referring to the Brinell hardness maximum value. The general purity (%) quality is 98.5 to 99.8, and the impurity element oxygen quality (%) ranges from 0.05 to 0.30. The hardness (HB) of sponge titanium ranges from 95 to 200. Features High strength-to-weight ratio: Titanium sponge is perfect for use in aerospace and military applications where weight reduction is important because of its high strength-to-weight ratio. Excellent corrosion resistance: Titanium sponge is highly resistant to corrosion, even in harsh environments. Biocompatibility: Titanium sponge is biocompatible, making it an ideal material for use in medical implants and devices. Heat resistance: Titanium sponge has a high melting point and is highly resistant to heat, making it ideal for use in high-temperature applications. Applications Defense and aerospace: Due to its superior corrosion resistance and high strength-to-weight ratio, the titanium sponge is frequently utilized in the defense and aerospace industries. Chemical and Petrochemical: Titanium sponge is used in the chemical and petrochemical industries due to its excellent corrosion resistance. It is used in heat exchangers, pressure vessels, and reactors. Medical: Titanium sponge is biocompatible, making it ideal for use in medical implants and devices, such as dental implants, joint replacements, and pacemakers. Sports equipment: Titanium sponge is used in sports equipment, such as golf clubs, tennis rackets, and bicycle frames, due to its high strength-to-weight ratio. Jewelry: Titanium sponge is used in jewelry making due to its unique properties, such as its light weight and corrosion resistance.
Product Introduction Titanium powder corrugated plate is a kind of titanium corrugated plate manufactured by titanium powder metallurgy process. Specifically, the titanium powder metallurgy process is to mix titanium powder and other additives, and then process it under high temperature and pressure to form titanium corrugated plates. Titanium powder corrugated plates are commonly used in heat exchangers, where they help to improve the efficiency of heat transfer between fluids by increasing the contact area between the fluids and the plate surface. They are also used in the chemical and petrochemical industries, as well as in the aerospace and marine industries, due to their resistance to corrosion and high strength-to-weight ratio. Parameter Material: pure titanium, Ti-6Al-4V, Ti-3Al-2.5V Length: Max. 1000mm Width: Max.600mm Thickness: Max. 50mm Pore size: 0.2-60um Wave height: 0.2mm,0.3mm, or customized Wave width: 1.2mm,1.3mm, or customized Wave pitch: 0.7mm,0.8mm, or customized The main steps for manufacturing titanium corrugated plates using the titanium powder metallurgy process include: Titanium powder preparation: First, the titanium powder needs to be prepared into appropriate particle size and shape for further processing. Additive mixing: Mix the titanium powder with other additives such as copper, aluminum, etc. to improve the workability and mechanical properties of the titanium powder. Pressing and forming: Put the mixed titanium powder and additives into a mold for pressing and forming. This process needs to be carried out under high pressure, usually between 100MPa to 2000MPa. Sintering: Sinter the pressed and formed titanium powder at high temperature to make it into an integrated titanium corrugated sheet. This process needs to be carried out in an inert atmosphere to avoid oxidation. Heat treatment and surface treatment: After sintering, the titanium powder corrugated sheet needs to undergo heat treatment and surface treatment to improve its mechanical and corrosion resistance properties. Compared with the traditional titanium plate rolling process, the titanium powder metallurgy process can manufacture titanium corrugated sheets with more complex shapes and structures. In addition, the titanium powder metallurgy process can also control the pore size, wall thickness, wave height, and wavelength of the titanium corrugated sheet to meet different filtration requirements.
Product Introduction Customized 30um porous titanium curved microplate for filtration is a material with high porosity, good chemical stability and corrosion resistance, so it is widely used in filtration and electrolysis industries. Customized 30um porous titanium curved microplate for filtration also has other applications in the filtration and electrolysis industries, such as catalyst support materials, fuel cells, gas purification, etc.. Porous titanium sheet with a variety of filtering accuracy and diameters is offered by TOPTITECH. On porous titanium sheet, we can also perform machining operations like chamfering, punching, cutting, etc. Parameters Brand: TOPTITECH Size: According to the drawing Pore size: 30um Withstand voltage:Max2.0-3.0MPa Working Temperature:300
Product Introduction Metal porous titanium plates are primarily used in standard PEM electrolyzer single cells and stacks as the flow field or diffuser material, particularly on the oxygen (anode) side. . Electrolyzer hardwares cannot use carbon-based gas diffusion layers (GDLs) at the anode because the carbon will immediately oxidize to CO2 (if the medium is acidic) or carbonate ions (if the medium is basic) during the reaction. Porous titanium plates are an excellent option for a diffusion medium in various applications, including electrolyzers and fuel cells. TOPTITECH�´s porous metal gas diffusion layers are the top choice for achieving high performance in these applications. The uniform porosity, strength, and corrosion resistance outperform other diffusion layer productsTOPTITECH substrates are available in a variety of alloys to support a full range of fuel cell operating temperatures, and can be coated with surface treatments or catalyst layers to enchance performance. In an electrolyzer, why not utilize a carbon-based Gas Diffusion Layer? Using a carbon-based gas diffusion layer (GDL) in an electrolyzer can pose several challenges. The presence of oxygen ions and voltage on the anode side of the electrolyzer can cause the carbon in the GDL to be oxidized, resulting in the generation of CO2 gas. While this can initially lead to a lower electrolysis voltage, the consumption of the carbon GDL is a short-lived phenomenon. As a result, the stack compression decreases, leading to higher resistance and lower performance. Therefore, it is not advisable to use a carbon-based GDL in an electrolyzer. Parameters Place of origin: Baoji, China Brand: TOPTITECH Filtration precision:0.2um-100um Material: titanium Working temperature 300 Length: 30-1000mm(More than 1000mm can be welded) Thickness: 0.5mm
Product Introduction The Porous titanium round plate Diffusion Layer Hydrogen Electrode is made from a porous titanium material that allows the hydrogen gas to diffuse through the material and collect at the surface of the electrode. This diffusion layer helps to increase the efficiency of the hydrogen generator, as it allows for a greater surface area of the electrode to be exposed to the electrolyte, which in turn increases the amount of hydrogen that can be generated. Parameters Filtration precision: 0.45um 80um Application: The hydrogen industry, Hydrogen Fuel Cell industry, instruments, apparatus, etc. Temperature resistance:300 (wet) Sheet dimension range:0.8-2.5mm Thickness x
Product Introduction The sintered corrugated plate is a corrugated plate made by the powder metallurgy process. It is usually made of metal or alloy powder through mixing, pressing, sintering, and other processes, and has excellent properties such as high strength, corrosion resistance, and high-temperature resistance. The manufacturing process of powder-sintered corrugated board is relatively simple, and can be customized according to specific needs, with high material utilization and production efficiency. At the same time, its corrugated shape can increase its surface area and channel length, improving its filtration and separation efficiency. In the fields of chemical industry and petroleum, the powder-sintered corrugated plate has become a kind of necessary filtration and separation equipment. In applying titanium sintered corrugated plate and ordinary titanium sintered plate in the electrolytic cell, titanium sintered corrugated plate has some advantages over ordinary titanium sintered plate. First, the corrugated shape of the titanium sintered corrugated plate can increase its surface area and channel length, which helps to improve the efficiency and yield of the electrolysis reaction. Secondly, the titanium sintered corrugated plate can improve the fluidity and mixing of the electrolytic cell, which is beneficial to the electrolyte�´s uniform distribution and the reaction product�´s rapid discharge. The corrugated structure on the surface of the titanium sintered corrugated plate can indeed increase the electrode surface area, increase the current transfer efficiency, and thus improve the electrolysis efficiency. In addition, it can also increase the mechanical strength and stability of the electrode, reduce the electrode�´s deformation and damage, prolong the electrode�´s service life, and reduce the maintenance cost. Therefore, the corrugated structure on the surface of titanium sintered corrugated plate has important application value in electrochemistry, but it does not directly affect the conductivity in the electrolyte solution. Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer´s designated place without damage.
Product Introduction Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries. Parameters Material: Titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm Dia: 1MM above Features 1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry. 2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries. 3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics. 4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis. 5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
Product Introduction A porous titanium plate is a type of material made from titanium that has many small holes or pores throughout its surface. These pores can range in size from a few micrometers to several millimeters, depending on the manufacturing process and the intended use of the plate. Porous titanium plates are commonly used in a variety of applications, includingbiomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange. Parameters Material: titanium sponge Porosity: 35% Filtration rate: 0.22mm- 100mm Thickness: above 1mm Size: square round and customized with the drawing How is the porosity of the plate controlled during manufacturing The porosity of aporous titaniumplate can be controlled during the manufacturing process. In the powder sintering process,titanium powderis compressed and heated to a temperature just below the melting point of titanium. The powder particles then fuse together to form a solid plate with a controlled porosity. The porosity of the plate can be controlled by adjusting the size and shape of the powder particles, the temperature and pressure of thesintering process, and the amount of binder material used.
Product Introduction Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1 3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories.
Product Introduction As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Porous titanium plate, made of pure titanium, Gr1 grade, non-toxic, safe, naturally bonded after high temperature sintering, relatively uniform pore size, no impurities, good air permeability, high-efficiency reaction, high hydrogen production efficiency, and become an efficient auxiliary part of hydrogen energy equipment. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape. The pore morphology was observed by means of metallographic microscopy, the pore size distribution was determined by mathematical statistics, and the compression properties were measured by compression tests.
Porous titanium plate is a type of material that is characterized by its interconnected network of pores. It is made from titanium, which is a lightweight, strong, and corrosion-resistant metal. The porosity of the titanium plate allows for increased surface area, which can be useful in applications such as filtration, catalysis, and biomedical implants. Product Parameters Brand: TOPTITECH Porosity: 30-40% Filtration rate: 1um-50um Temperature: â?¤300â?? Size: Customized Porous titanium plate has several features that make it a unique material. First, the pore size and distribution can be controlled during manufacturing, allowing for customization of the material for specific applications. The interconnected network of pores also allows for fluid or gas flow through the material, making it useful for filtration and catalysis. Porous titanium plate is also biocompatible, which makes it suitable for use in biomedical applications. Porous titanium plate has a wide range of applications in various industries. In biomedical applications, it is commonly used for bone implants, where the porous structure allows for better integration with surrounding bone tissue. It is also used in dental implants, where the porous structure allows for better anchoring of the implant. In the chemical industry, porous titanium plate is used for catalysis, where the high surface area and pore structure allow for efficient chemical reactions. It is also used in filtration applications, such as air and water filters. Porous titanium plate can be manufactured using several techniques, including powder metallurgy, sintering, and electrochemical deposition. In powder metallurgy, titanium powder is mixed with a binder material and then pressed into a desired shape. The material is then sintered to remove the binder and fuse the titanium particles together. In electrochemical deposition, a layer of titanium is deposited onto a substrate using an electrochemical process. The resulting layer can be made porous by controlling the deposition parameters.
The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, formed by pressing the mold and sintered at high temperature in a vacuum. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300â?? Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments.
Product Introduction In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high-temperature resistance, and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m~65m Material: Pure titanium Operating Temperature: 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high-temperature resistance, breathable Features 1. Corrosion resistance 2. Porous air permeability 3. High conductivity 4. High thermal conductivity 5. Good permeability Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material sweat to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate and poison, etc. (3) Impregnated with anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity: The porosity of the PTL porous titanium sintered plate is an important parameter that determines the surface area available for the hydrogen production reaction. Typically, PTL plates have a porosity of around 30-50%, which provides a large surface area for efficient hydrogen production. 2.Pore size: The size of the pores in the PTL plate can also affect the efficiency of the hydrogen production reaction. Generally, PTL plates have pore sizes ranging from 1um to 100um, depending on the specific application. 3.Thickness: The thickness of the PTL plate can vary depending on the design of the hydrogen production electrolyzer. TopTiTech can customized the thickness from 1mm to 3mm. 4.Catalyst loading: The amount and type of catalyst material used to coat the PTL plate can also affect the efficiency of the hydrogen production reaction. Typically, platinum or iridium catalysts are used, with loading levels ranging from a few micrograms per square centimeter to several milligrams per square centimeter.
