The Porous Titanium Plate In Pemfc Toptitech

In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high temperature resistance and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m 65 m Material: Pure titanium Operating Temperature: 0 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high temperature resistance, breathable Features 1. Corrosion resistance It exists between the bipolar plate and the catalyst layer. During the electrochemical reaction, the high current density is 2A/cm2, which has high electrical corrosion resistance and must have corrosion resistance; 2. Porous air permeability Serve as a medium for hydrogen/oxygen or methanol/air to diffuse to the catalyst layer, and must be a porous and breathable material; 3. High conductivity To act as a current conductor, it must be a highly conductive material; 4. High thermal conductivity The reaction is an exothermic reaction, and overheating will cause damage to the proton exchange membrane. The gas diffusion layer must be a high thermal conductivity material to conduct heat away to avoid damage to the proton exchange membrane; 5. Good permeability Fuel cell reaction to generate water will cause performance degradation, so the gas diffusion layer must be able to export water and have high hydrophobicity; Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material "sweat" to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate, and poison, etc. (3) Impregnated with the anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.

The 10m Porous Titanium Plate with Chamfers for PEMFC is a high-performance filter designed specifically for Proton Exchange Membrane Fuel Cells (PEMFC). With its dimensions of 50*50mm and exceptional precision, this product fulfills the stringent filtration requirements of PEMFC systems. Featuring a precise 10�¼m pore size, the porous titanium plate effectively removes fine particulate matter, ensuring the stable operation of the fuel cell system. Made from high-quality materials and manufactured with precision, this filter guarantees excellent filtration performance and a long lifespan. In terms of design, the 10�¼m Porous Titanium Plate with Chamfers offers two options for chamfered edges: semi-circular and straight-edged. These design choices not only facilitate convenient installation and removal but also prioritize the safety of operators and equipment by eliminating sharp edges. Whether employed in research laboratories or industrial applications, this filter serves as an ideal choice for PEMFC filtration. By efficiently filtering out fine particulate matter, it creates a clean working environment for fuel cells. Parameter Material: titanium powder Thickness: 0.5mm Size: 50*50mm Pore size: 10um Chamfers: customized by requirements Features High precision: The product has excellent 10um precision and can effectively filter out the tiny particulate matter required by PEMFC. Long-lasting and durable: Using high-quality materials and precision manufacturing processes to ensure excellent performance and long life of the product. Safety design: The chamfer design provides two options, semi-circular and straight edge types, which facilitates installation and disassembly and prevents sharp edges from causing harm to operators or equipment. Wide application: Whether in research laboratories or industrial applications, this product is ideal for PEMFC filtration. Clean environment: It can efficiently filter tiny particulate matter and provide a clean working environment for fuel cells. Chamfering process For semi-circular chamfers, we use suitable tools, such as filleting tools or sheet metal processing machines, to weaken, cut and trim the edges to give them a smooth, rounded shape. For straight-edge chamfers, we use cutting or cutting tools in the process to precisely cut and trim the edges to form a straight-line chamfer. We attach great importance to safety and precision when performing chamfering operations. We ensure the chamfering process is completed using the proper tools and equipment, as well as experienced operators, to ensure a smooth and consistent edge. The design and processing of chamfers help facilitate installation and removal while eliminating the dangers that may arise from sharp edges. Such a design not only improves the convenience and safety of operations but also ensures product quality and reliability.

Product Introduction As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Porous titanium plate, made of pure titanium, Gr1 grade, non-toxic, safe, naturally bonded after high temperature sintering, relatively uniform pore size, no impurities, good air permeability, high-efficiency reaction, high hydrogen production efficiency, and become an efficient auxiliary part of hydrogen energy equipment. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape. The pore morphology was observed by means of metallographic microscopy, the pore size distribution was determined by mathematical statistics, and the compression properties were measured by compression tests.

Product Introduction Sintered titanium plate is a kind of titanium product, which is widely used in various industries such as chemical industry, medical treatment and food processing due to its excellent corrosion resistance and high strength. The porous titanium plate produced using the sintering process is to press the titanium powder into the desired shape and then sinter at high temperature. Titanium powder particles link together during sintering to form a solid structure with interconnecting pores of specified size and shape. The sintered titanium plates produced have a high strength-to-weight ratio and are resistant to high temperatures and harsh chemical conditions. Sintered titanium plates can be tailored to suit customer needs, such as pore size, pore dispersion, and thickness. To meet a wide range of applications, we can also manufacture porous titanium plates with complex geometries such as cylindrical, conical, and flat shapes. To ensure product quality, we conduct strict tests on porous titanium plates, including pore size distribution analysis, compressive strength test and corrosion resistance test. Product parameters Filtration grade: 0.2-100um Thickness: above 1mm Shape: square, round, shaped Size: 300 800mm can be customized Pressure: 0.2Mpa Features 1. High strength and toughness: During the sintering process, the titanium powder particles are closely combined with each other, so that the sintered titanium plate has high strength and toughness, and can withstand certain impact and pressure. 2. Excellent corrosion resistance: Titanium itself has good corrosion resistance, and a uniform microporous structure can be formed through sintering, which further improves the corrosion resistance of titanium plates. 3. Can be made into complex shapes: through the sintering process, titanium sheets of various complex shapes and pore diameters can be made to meet the needs of different industries and applications. 4. Adjustable pore size and porosity: By adjusting the sintering process parameters, the pore size and porosity of the titanium sheet can be controlled to obtain the performance required for different applications such as filtration, separation, and adsorption. How to purchase porous sintered titanium plate A. Materials to be delivered; B. Corrosion problems; C. Special operating conditions involving pressure, temperature, etc.; D. Pollutants encountered; E. Required shape, dimensions and tolerances; F. Required flow and pressure allowed by the filter unit.

We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc

The 10m Porous Titanium Plate with Chamfers for PEMFC is a high-performance filter designed specifically for Proton Exchange Membrane Fuel Cells (PEMFC). With its dimensions of 50*50mm and exceptional precision, this product fulfills the stringent filtration requirements of PEMFC systems. Parameter Material: titanium powder Thickness: 0.5mm Size: 50*50mm Pore size: 10um Chamfers: customized by requirements Features High precision: The product has excellent 10um precision and can effectively filter out the tiny particulate matter required by PEMFC. Long-lasting and durable: Using high-quality materials and precision manufacturing processes to ensure excellent performance and long life of the product. Safety design: The chamfer design provides two options, semi-circular and straight edge types, which facilitates installation and disassembly and prevents sharp edges from causing harm to operators or equipment. Wide application: Whether in research laboratories or industrial applications, this product is ideal for PEMFC filtration. Clean environment: It can efficiently filter tiny particulate matter and provide a clean working environment for fuel cells. Chamfering process For semi-circular chamfers, we use suitable tools, such as filleting tools or sheet metal processing machines, to weaken, cut and trim the edges to give them a smooth, rounded shape. For straight-edge chamfers, we use cutting or cutting tools in the process to precisely cut and trim the edges to form a straight-line chamfer. We attach great importance to safety and precision when performing chamfering operations. We ensure the chamfering process is completed using the proper tools and equipment, as well as experienced operators, to ensure a smooth and consistent edge. The design and processing of chamfers help facilitate installation and removal while eliminating the dangers that may arise from sharp edges. Such a design not only improves the convenience and safety of operation, but also ensures product quality and reliability.