Product Introduction
As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key.
Porous titanium plate, made of pure titanium, Gr1 grade, non-toxic, safe, naturally bonded after high temperature sintering, relatively uniform pore size,
no impurities, good air permeability, high-efficiency reaction, high hydrogen production efficiency, and become an efficient auxiliary part of hydrogen energy equipment.
Product parameters
Brand: TOPTITECH
Material: Gr1
Shape: Rectangular
Applicable object: electrolyzer
Thickness: 0.8-2.0mm
Specifications: can be customized
Mesh: 1000 mesh/inch
Filtration accuracy: 20 microns
Type: Efficient
Performance: acid resistance; alkali resistance; high temperature resistance
Uses: water, gas, liquid
Features
1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing;
2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material;
3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure;
4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees.
Process
The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape.
The pore morphology was observed by means of metallographic microscopy, the pore size distribution was determined by mathematical statistics, and the compression properties were measured by compression tests.
Standards ASTM / ASME B265 / SB265 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Applications 1. Decarbonization filtration in the concentrated preparation link of the pharmaceutical industry and security filtration before terminal filtration in the thin preparation link. 2. Filtration, decarbonization filtration, and fine filtering of materials used in the manufacturing of raw materials. 3. Filtration following ozone sterilizing and ozone aeration, as well as security filtration for water treatment industries RO, EDI, and ultrafiltration systems. the 4. Clarify and filtering of alcohol, beer, soy sauce, vegetable oil, mineral water, and other drinks and food. 5. Material purification and sintered porous titanium plate at the feed inlet, decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultra-fine fine bodies and catalysts, precision filtration and system heat conduction after resin adsorption Impurity removal and filtration of oil and materials, catalytic gas purification, etc. the 6. Before reverse osmosis in the seawater desalination field, oilfield return water filtering and security filtration. 7. White clay filtration and high-temperature decarbonization in the dye business. 8. Steam, compressed air, and catalytic gas purification and filtration are the primary aspects of gas purification. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape.
We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc
Product Introduction In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high-temperature resistance, and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m~65m Material: Pure titanium Operating Temperature: 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high-temperature resistance, breathable Features 1. Corrosion resistance 2. Porous air permeability 3. High conductivity 4. High thermal conductivity 5. Good permeability Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material sweat to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate and poison, etc. (3) Impregnated with anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
Supplier: Icumsa 45 sugar, nano titanium, all types of thermal coal, metallurgical coal and pet coke, all types of used industrial mfg. equipment.
Product Introduction Sintered titanium plate is a kind of titanium product, which is widely used in various industries such as chemical industry, medical treatment and food processing due to its excellent corrosion resistance and high strength. The porous titanium plate produced using the sintering process is to press the titanium powder into the desired shape and then sinter at high temperature. Titanium powder particles link together during sintering to form a solid structure with interconnecting pores of specified size and shape. The sintered titanium plates produced have a high strength-to-weight ratio and are resistant to high temperatures and harsh chemical conditions. Sintered titanium plates can be tailored to suit customer needs, such as pore size, pore dispersion, and thickness. To meet a wide range of applications, we can also manufacture porous titanium plates with complex geometries such as cylindrical, conical, and flat shapes. To ensure product quality, we conduct strict tests on porous titanium plates, including pore size distribution analysis, compressive strength test and corrosion resistance test. Product parameters Filtration grade: 0.2-100um Thickness: above 1mm Shape: square, round, shaped Size: 300 800mm can be customized Pressure: 0.2Mpa Features 1. High strength and toughness: During the sintering process, the titanium powder particles are closely combined with each other, so that the sintered titanium plate has high strength and toughness, and can withstand certain impact and pressure. 2. Excellent corrosion resistance: Titanium itself has good corrosion resistance, and a uniform microporous structure can be formed through sintering, which further improves the corrosion resistance of titanium plates. 3. Can be made into complex shapes: through the sintering process, titanium sheets of various complex shapes and pore diameters can be made to meet the needs of different industries and applications. 4. Adjustable pore size and porosity: By adjusting the sintering process parameters, the pore size and porosity of the titanium sheet can be controlled to obtain the performance required for different applications such as filtration, separation, and adsorption. How to purchase porous sintered titanium plate A. Materials to be delivered; B. Corrosion problems; C. Special operating conditions involving pressure, temperature, etc.; D. Pollutants encountered; E. Required shape, dimensions and tolerances; F. Required flow and pressure allowed by the filter unit.
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.