Product Introduction
Metal porous titanium plates are primarily used in standard PEM electrolyzer single cells and stacks as the flow field or diffuser material, particularly on the oxygen (anode) side. . Electrolyzer hardwares cannot use carbon-based gas diffusion layers (GDLs) at the anode because the carbon will immediately oxidize to CO2 (if the medium is acidic) or carbonate ions (if the medium is basic) during the reaction.
Porous titanium plates are an excellent option for a diffusion medium in various applications, including electrolyzers and fuel cells. TOPTITECH�´s porous metal gas diffusion layers are the top choice for achieving high performance in these applications. The uniform porosity, strength, and corrosion resistance outperform other diffusion layer productsTOPTITECH substrates are available in a variety of alloys to support a full range of fuel cell operating temperatures, and can be coated with surface treatments or catalyst layers to enchance performance.
In an electrolyzer, why not utilize a carbon-based Gas Diffusion Layer?
Using a carbon-based gas diffusion layer (GDL) in an electrolyzer can pose several challenges. The presence of oxygen ions and voltage on the anode side of the electrolyzer can cause the carbon in the GDL to be oxidized, resulting in the generation of CO2 gas. While this can initially lead to a lower electrolysis voltage, the consumption of the carbon GDL is a short-lived phenomenon. As a result, the stack compression decreases, leading to higher resistance and lower performance. Therefore, it is not advisable to use a carbon-based GDL in an electrolyzer.
Parameters
Place of origin: Baoji, China
Brand: TOPTITECH
Filtration precision:0.2um-100um
Material: titanium
Working temperature 300
Length: 30-1000mm(More than 1000mm can be welded)
Thickness: 0.5mm
In an electrolyzer, why not utilize a carbon-based Gas Diffusion Layer? Using a carbon-based gas diffusion layer (GDL) in an electrolyzer can pose several challenges. The presence of oxygen ions and voltage on the anode side of the electrolyzer can cause the carbon in the GDL to be oxidized, resulting in the generation of CO2 gas. While this can initially lead to a lower electrolysis voltage, the consumption of the carbon GDL is a short-lived phenomenon. As a result, the stack compression decreases, leading to higher resistance and lower performance. Therefore, it is not advisable to use a carbon-based GDL in an electrolyzer. Parameters Place of origin: Baoji, China Brand: TOPTITECH Filtration precision:0.2um-100um Material: titanium Working temperatureï¼?â?¤ 300â?? Length: 30-1000mm(More than 1000mm can be welded) Thickness: â?¥0.5mm FEATURES High corrosion resistance: Titanium is a highly corrosion-resistant material, making it suitable for use in harsh environments. High strength-to-weight ratio: Porous titanium plates are lightweight yet strong, making them ideal for applications where weight is a concern. High porosity: The porous nature of titanium plates allows for efficient diffusion of gases, making them well-suited for use in electrolyzers and fuel cells. Customizable properties: The pore size and distribution of porous titanium plates can be tailored to meet specific application requirements, allowing for greater flexibility in design. Excellent thermal conductivity: Titanium has a high thermal conductivity, which allows for efficient heat transfer and thermal management in fuel cells and electrolyzers. Long service life: Due to its corrosion resistance and durability, porous titanium plates have a long service life, reducing maintenance and replacement costs. Ease of manufacturing: Porous titanium plates can be manufactured using a variety of techniques, including sintering, powder metallurgy, and electrochemical etching, making them easy to produce in large quantities and at a reasonable cost.
Supplier: Icumsa 45 sugar, nano titanium, all types of thermal coal, metallurgical coal and pet coke, all types of used industrial mfg. equipment.
We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.
Supplier: Stainless steel pipe, stainless steel plate, stainless steel round bar ,stainless steel seamless pipe, titanium pipe, titanium plate, monel plate ,monel pipe, titanium wire , monel wire , monel seamless pipe ,stainless steel elbow, stainless steel circle
Product : Titanium Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 21 reviews price : Start from 20 USD RFP India is Indias wellknown manufacturer supplier and exporter of Titanium which is a metallic element and is being recognized for its high strengthtoweight ratio It is a strong metal with low density that is quite ductile lustrous and metallicwhite in colour The relatively high melting point probably over 1650 C or 3000 F makes it useful as a refractory metal Titanium is used in steel as an alloying element ferrotitanium to reduce grain size and as a deoxidizer and in stainless steel to reduce carbon content Applications for titanium mill products sheet plate bar wire forgings castings can be found in industrial aerospace recreational and emerging markets Powdered titanium is used in pyrotechnics as a source of brightburning particles Titanium pipes tubes
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
Supplier: Oil products including petcoke, graphite, lithium, iron, copper, coal, coltan, titanium, eucalyptus wood logs, and wood chips, pine wood logs and wood chips, teak wood logs, gmelina wood logs, saman wood logs, sugar
Services: Sourcing
Buyer: Pine, iron and raw materials
