Voltage :ací¡220/230/250, 50/60hz
Ací¡100/110/120v, 50/60hz
Rated power :100w
X/y scan a ngle:60
Scan rate:ilda30kpps
Laser diode
Green (532nm)>200mw
Working mode
Dmx512, music active& automatic
Pc laser show software : pangolin, phoenix, ishow and etc(via ilda port)
Additional function: pattern download via com1maximum 65535 image(2mb~8mb flash memory)
Dmx512 mode
Dmx512 channel :15chs
Color :stochastic color, storbe , color corroding
Gobo:255 gobos&30 group cartoon &30 group wave effect
Movement :rotating , bounce, zoom, slow draw , stretch& rolling
Optional function: remote control
Voltage :ací¡220/230/250, 50/60hz
Ací¡100/110/120v, 50/60hz
Rated power :100w
X/y scan a ngle:60
Scan rate:ilda25kpps
Laser diode
Red(650nm)>150mw
Green(532nm)>50mw
Working mode
Dmx512, music active& automatic
Pc laser show software : pangolin, phoenix, ishow and etc(via ilda port)
Additional function: pattern download via com1maximum 65535 image(2mb~8mb flash memory)
Optional function: remote contro
Features:
Small and light, conveniently to be carried
Auto close light when scanner have trouble
Safety capacity: design according to security and good performance, safer to human and environment
Twinkling laser, more than 2,000 red and green beams shot out from the aperture within 70 angles, the effect of rotating direction, speed and frequently flashing controlled
Applicable for disco, clubs, KTV, pub, bar, family party
New product is the latest invention patent in the world with a unique effect and large marketing potential
Specifications:
Laser diode: diode pumped solid state laser (DPSS)
Total laser power: 150mW
Red laser:
Wavelength: 650nm
Laser power: 130mW
Green laser:
Wavelength: 532nm
Laser power: 20mW
Frequency: 50 - 60Hz
Power supply: 12V DC
Control: high capacity and speed microprocessor
Scan system: micro-step motor scanner, big angle scanning
Play mode: sound active, autoplay
Inner packing size: 175 x 160 x 135mm
Gross weight: 1kg .
Paking:PE bag+stryrofoam+box
packing size: 175 x 160 x 135mm
Gross weight: 1kg .
3) Mounted 2-element Scan Lenses, STC Series
The mounted 2-element scan lenses are 2-element designs for CO2 laser beams up to 15mm diameter, supplied complete in a mechanical housing.
2895 Laser Equipments Products Suppliers
Short on time? Let Laser Equipments Products sellers contact you.
With a new development process, CNI has upgraded solid state 543 nm green laser up to 1 watt, 589 nm yellow laser up to 2 watts, and 660 nm red laser up to 2 watts, which has been designed as a complete laser solution for industry use in diverse applications.
Fiber laser with 20 w power
Marking area : 100 x 100 mm ; 200 x 200 mm
Longer laser source life
No consumables cost
Lower electrical consumption
Lower maintenance cost
Compact & user friendly
1.Introduction
The new generation of laser scribing machine YMS-50 (CE certificated product) is capable of scribing various silicon wafer, solar cell, ceramic wafer, thin metal sheet (~0.5 mm thick maximum), etc., in industries of electronics, semiconductor and solar energy, etc.. It is designed by experts with professional features, such as excellent beam quality and power stability, precise CNC worktable and efficient auto cooling system. Some of the most important parts are manufactured in UK, USA and Germany. Thanks to the automatic control of the whole system, you can save more efforts on the manufacturing, instead of how to operate and maintain the system.
2. Features
Excellent beam quality and system reliability
High-speed scribing (up to 120 mm/s), very low-defective index
Auto cooling system
Precise CNC worktable
Friendly man-machine interface and simple software operation
3. Technical Parameters
Laser medium Nd3+:YAG
Wavelength 1064 nm
Pump source Kr lamp
Laser cavity Ceramic
Modulated frequency 0.5 - 50 kHz
Beam power Adjustable, max 50 W
Aiming laser Red
Scribing speed Adjustable, max 120 mm/ s
Scribing depth Max 1.2mm
Line width Min 0.2mm
Worktable repeating accuracy 0.01mm
Marking area 300 mm í- 300 mm
Power supply 3-phase 4-wire AC 380V í+ 10%,50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation)
Input power Max 5kW
Dimension 550 mm x 290 mm x 650 mm
Net weight ~560 kg
Cooling Mode Water cooling
4.Standard Configuration
Laser machine í- 1 set
Exhauster í- 1 set
Vacuum pump í- 1 set
Cooling unit (Chiller, temperature controller, water tank, filter) í- 1 set
Worktable unit (CNC controller) í- 1 set
Kr lamp í- 2 pieces
Laser detector í- 1 piece
PC í- 1 set
Scribing software (In English) í- 1 set
Operation manual (In English) í- 1
1.Introduction
The laser scribing machine is specially designed for insulation of a-si (amorphous silicon) and back contacts such as aluminum coating of the a-si thin-film solar cell, without any damage to tco (transparent conductive oxidization) coating.
2. Features
Cnc worktable size: 900mm íß 1600mm
High-speed up to 500 mm/s or 200 íß 4
Auto programming / cooling / on-off
Kerfs width 0.05 ¿c 0.15 mm, continuously adjustable
3. Technical parameters
Wavelength 532 nm
Laser output stability ín ía 3%
Beam expanded angle ín 8 mrad
Scribing speed Continuously adjustable, max 250mm/s
Kerf width Continuously adjustable, 0.05 - 0.15 mm
Scribing area 900 mm íß 1600 mm
Power supply Single-phase ac 220v ía 10%, 50 hz /60 hz, pe, (a voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation)
Input power Max 1500w
Cooling mode Air cooling
4.Standard configuration
Laser machine íß 1 set
Worktable unit (cnc controller) íß 1 set
Pc íß 1 set
Scribing software (in english) íß 1 set
Operation manual (in english) íß 1.
1.Introduction
The laser scribing machine is specially designed for insulation of a-si (amorphous silicon) and back contacts such as aluminum coating of the a-si thin-film solar cell, without any damage to tco (transparent conductive oxidization) coating.
2. Features
Laser: lamp-pumping laser
Cnc worktable size: 500mm íß 500mm
High-speed up to250 mm/s
Auto programming / cooling / on-off
Kerfs width 0.05-0.15 mm, continuously adjustable
3. Technical parameters
Wavelength 532 nm
Pump source Kr lamp
Laser output stability ín ía 3%
Beam expanded angle ín 8 mrad
Scribing speed Continuously adjustable, max 250mm/s
Kerf width Continuously adjustable, 0.05 ~ 0.15 mm
Scribing area 500 mm íß 500 mm
Power supply 3-phase 4-wire ac 380v ía 10%, 50 hz /60 hz, pe, (a voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation)
Input power Max 5kw
Cooling mode Water cooling
4.Standard configuration
Laser machine íß 1 set
Exhauster íß 1 set
Vacuum pump íß 1 set
Cooling unit (chiller, temperature controller, water tank, filter) íß 1 set
Worktable unit (cnc controller) íß 1 set
Kr lamp íß 2 pieces
Laser detector íß 1 piece
1.Introduction
The new generation of laser marking machine YMM-50 is applicable to almost any material surface. It offers various advantages with comparison to the traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free(Tools wear in stamping systems). Laser marking technique offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any material surface.
2. Features
Friendly and ergonomical man-machine interface
Stable, precise and high-speed system
File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.; Embedded test and graphic design tools offer various editing features
Auto-numbering Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, etc. and serial numbers
Auto cooling
Flexible text / graphics marking; Line or arc scribing to enable flexible profile scribing (Complicated profile scribing is optional)
3. Technical Parameters
Wavelength 1064 nm
Pump source Kr lamp
Laser cavity Ceramic
Laser output stability í_ í+ 3%
Beam expanded angle í_ 8 mrad
Aiming laser Red
Linear speed Adjustable, max 5000 mm/ s
Line width Min 0.1mm
Letter size Min 0.5mm
Marking area F=160 mm 70 mm í- 70 mm
F=220 mm 100 mm í- 100 mm
F=250 mm 150 mm í-150 mm
Power supply Single-phase AC 220 V í+ 10%, 50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation)
Input power Max 7kW
Dimension 1500 mm x 500 mm x 1200 mm
Net weight ~180 kg
Cooling Mode Water cooling
4.Standard Configuration
Laser machine í- 1 set
PC í- 1 set
Marking software (In English) í- 1 set
Operation manual (In English) í- 1
1.Introduction
The laser marking machine YMM-10C is applicable to almost any non-metal surface. It has many clear advantages with comparison to traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free (Tools wear in stamping systems). Laser marking offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any surface.
2. Features
Unique optics design
Friendly and ergonomical man-machine interface
Stable, precise and high-speed
File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.. Embedded test and graphic design tools offers various editing features
Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, Data Matrix, QR Code, etc. , and serial numbers
3. Technical Parameters
Wavelength 1064 nm
Aiming laser Red
Linear speed Adjustable, max 5000 mm/ s
Line width Min 0.2 mm
Letter size Min 0.8 mm
Marking area F=160 mm 70 mm í- 70 mm
F=220 mm 100 mm í- 100 mm
F=250 mm 150 mm í-150 mm
Power supply Single-phase AC 220 V í+ 10%, 50 Hz / 60Hz
Input power Max 210W
Dimension 550 mm x 290 mm x 650 mm
Net weight ~33.75 kg
Cooling Mode Air cooling
4.Standard Configuration
Laser machine í- 1 set
PC í- 1 set
Marking software (In English) í- 1 set
Operation manual (In English) í- 1
Products Characteristics
1.Advanced stepper control system with high precision and stalbe work function,support work on/off line.
2.Integrated design adopt the framework structure,stable and reliable,low noise.
3.Imported linear rail, advanced high-speed motor and driver, carving fast and higher precision.
4.High stability laser tube,imported lens and reflected mirror,infrared positon system ensure the cutting precision is high,incision is smooth.
5.Power off memory and breakpoint continuous carving function avoid wasting materials.
6.Laser Cut 5 software the latest support graphic format form the Auto CAD,Corel Drow,Photoshop and so on.
7.Multifarious work table such as honeycomb work table,aluminous strip work table and aluminous plate work table for choose, up-down device, rotary device optional.
Technical Parameters
We can supply different kinds of this machine:SF960,SF 1290,SF1410 and so on.
1.Model: SF 960
2.Work area:900X600mm
3.Laser power: 60W(option 80íó100íó130íó150W)
4.Laser type:Co2 sealed glass laser tube
5.Engraving speed:1-50000mm/min
6.Cuttting speed:1-30000mm/min
7.Minimum shapping character:Chinese character2x2mm,letter1x1mm
8.Maximal scanning precision:3000dpi
9.Location precision:<0.01mm
10.Working temperature:5íµ-40íµ
11.Working hunidity:5%-95% free of condensed water
12.Cooling type:Water cooling
13.Curve engraving(Yes/No): Rotary attanchment(curve engraving optional)
14.Gross Power:1000-1800W
15.Assistant accessories: (1)Water cooling conditioner/water pump (2)Exhaust fan (3)Air pump
16.Recommended Accessories:Laser Tube,Mirror.
Application:
Marble,Acrylic,Double color board,Plexiglass,Wooden products,Bamboo products, MDF, Cloth, Leather,Glass, Ceramic tiles and so on.
Applicable Industry:
Advertisment,Decoration.Craftworks,Furniture,,Wooden package,Toy, Model, Clothes and so on.
2895 Laser Equipments Products Suppliers
Short on time? Let Laser Equipments Products sellers contact you.
