Beam Visualizer-Sensitive

Description- The UV Laser Marking with its wavelength 355nm is suitable for marking plastics (ABS, PA) due to a high repetition rate. The UV laser wavelength is suitable and versatile in marking a wide range of materials and is perfect for â??cold markingâ?? applications where heat zones are not allowed. UV Laser mark at very high speeds which are indispensable for short cycle times in industrial manufacturing environments. With high peak powers they are most suitable for fine marking and structuring without thermal impact on glass applications and/or ceramics. The UV laser marking will mark plastics and silicon materials without the need of additives and will also mark glass with drastically reduced risk of micro fracture. The excellent beam quality also affords this laser the ability to be utilized in micro marking applications such as electronics, circuit boards and microchips in addition to solar panels and precise medical marking applications. They also provide an excellent quality for classical laser marking applications and micro material processing. Features- Small beam diameter and fine marking line Good quality and high laser beam stability Complete machine stability, simple and easy operation Narrow pulse width, small heat affected zone, work-piece without damage Suitable for sensitive material as cold light source Laser directly acting on molecular chain with maximum extend to avoid thermal effect It works stably, applied in superbly precise marking, such as: LCD, wafer, chip ceramic, sapphire, precise surface marking of other materials,3C electronics, Lamps, food package, wire rod ,leather, ceramic, PCV, glass, Phone case, medicine bottle, fine marking on glass substrate, electric appliance marking and so on. Technical Specifications- Wavelength 335nm Laser Beam Mode TEM00 Average Power Up to 2W Positioning Visible Red Diode Light Input Power 115/230VAC 50/60Hz System Power Consumption < 950W Cooling Air Cooled, active thermo-electric/Water Cooled Operating Temperature Range 18 to 35C (64 to 95F) Humidity 10% to 85% Non-condensing STANDARD LENS CONFIGURATIONS FOCAL LENGTH 100 mm 65 mm X 65 mm (2.56 X 2.56) 160 mm 110 mm X 110 mm (4.33 X 4.33) 255 mm 175 mm X 175 mm (6.89 X 6.89)

Product Description Laser Level, 16 Lines 4x360 Green Laser Level Self Leveling Tool, 132ft Green Beam Laser Level for Construction 4 X 360 LASER LINES: with two horizontal 360 plane, two vertical 360 planes, 16 laser lines, users can cover the floor, walls and ceiling throughout the room. Horizontal lines and vertical lines cross at 90 angles makes user quickly visualize and finish square layout. Intuitive operation and reliable quality makes it so easy to use. Quick Details Grade: DIY, Industrial Warranty: 1 year Customized support: OEM, ODM, OBM Model Number: WME-18 Size: 31 13 28cm Precision: 1MM/M Wavelength: 635 650nm Laser Color: Green Beam Line Certification: CE, Rohs Product Name: Cross Line Laser Level Color: Blue Laser beam: 16 Green Beams Type: Laser Power Meter Working Distance (Line): 50m Power supply: 18650 Lithium Battery Working range: Indoor 50m / Outdoor 30m Working temperature: 0~40 Degree Celsius Supply Ability Supply Ability: 20000 Piece/Pieces per Week Packaging & Delivery Packaging Details: Tool box packing including 1 pc of laser level, 1 pc of charger, 1pc of lithium battery, 1 pc of lifting platform, 1 pc of instruction, 1 pc of wall mounter, 1 pcs of steel plate. Product Name Laser Level Material Plastic / Alloy Laser Color Green Shape Square Package size 31 13 28cm Weight 2.53kg one of the top 10 factory in Electronic & Smart products market. We have experiences and knowledge in electronic products more than 20 years and have great reputation in producing and selling to global market We provide OEM and ODM service to meet with customer's requirement. Keep developing innovative products and service is our mission.With advanced digital technology, our factory is innovative and grow together with our customers, we take strict quality control before send out, there is always new products in our development deparment, sincerely hope that you can cooperate with us

Product Details Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe Place of Origin: Zhejiang in China Packaging Details: Tool box packing including 1 pc of laser level, 1 pc of charger, 1pc of lithium battery, 1 pc of lifting platform, 1 pc of instruction, 1 pc of wall mounter, 1 pcs of steel plate. Quick Details Size: 31X13X28 cm Brand Name: WAYMORE Power Supply: Lithium Battery RF Output Level: IP54 RF Port: High level green beam laser head Wavelength: 530 Precision: 1mm Model Number: WME-46 Grade: Industrial Customized support: OEM, ODM, OBM Brand Name: WAYMORE Precision: 1MM Wavelength: 635~650nm Laser Color: Green Beam Line Working range: Outdoor 30-50m Power supply: Li-ion Battery Single package size: 31X13X28 cm Single gross weight: 2.530 kg Specifications Laser Level, 16 Lines 4x360�° Green Laser Level Self Leveling Tool, 132ft Green Beam Laser Level for Construction 4 X 360�° LASER LINES: with two horizontal 360�° plane, two vertical 360 planes, 16 laser lines, users can cover the floor, walls and ceiling throughout the room. Horizontal lines and vertical lines cross at 90angles makes user quickly visualize and finish square layout. Intuitive operation and reliable quality makes it so easy to use. Product Name Laser Level Brand WAYMORE Material Plastic / Alloy Laser Color Green Shape Square Package size 31*13*28cm Weight 2.53kg Waymore Tools Co., Ltd. is one of the top 10 factory in Electronic & Smart products market. We have experiences and knowledge in electronic products more than 20 years and have great reputation in producing and selling to global market including Europe, America, East Asia and Africa.We provide OEM and ODM service to meet with customer's requirement. Keep developing innovative products and service is our mission.With advanced digital technology, our factory is innovative and grow together with our customers, we take strict quality control before send out, there is always new products in our development deparment, sincerely hope that you can cooperate with us!

MDC-L200 Laser Taper Measuring Instrument (Multi-dimensional Detection) Overview: Laser taper measuring instrument (multi-dimensional detection) is a new type of mold multi-taper measuring instrument developed by our company. The instrument adopts a high-precision, high-sensitivity laser measurement and positioning sensor, which scans the copper plate of the mold by a fixed-width laser line, and returns the measurement data in real time. The host computer shows the data of mold taper, surface cracks, surface flatness and other data after modeling and analyzing the returned measurement data. The upper computer software intuitively reflects the situation of the multi-taper surface of the tested mold to the user in the form of data table, data curve and 3D model diagram of the mold taper, and provides a true and reliable theoretical basis for the on-site operators to maintain the mold. The features: Humanized human-computer interaction interface Convenient system settings Portable low power consumption design Compatible detection structure with lots of specifications High-speed and stable wireless data transmission High-precision laser scanning measurement One-click measurement design Own network wireless transmission Small and lightweight front-end measurement The parameters: Mold width range: 60~400mm Measurement accuracy: 0.01mm Spot diameter: 1.0x1.5mm (spot scan), 1.0x20mm (line scan) Measurement method: laser displacement measurement Measuring beam: 3200 points Movement mode: high precision servo Movement accuracy: 1mm/65536 pulses Single measurement time: less than 2min Power supply: DC12V Operating temperature: -20~80â?? Shock resistance: 50G (X, Y, Z axis)

Features Increased sensitivity to visualize temperature differences Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and nine color palettes More intuitive visual interface, improved, user-tested, touch screen interface More flexibility to visualize target, tiny-to-large with interchangeable smart lenses - no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility Capture a clear, accurate image focused throughout the field of view with MultiSharpâ?¢ Focus Get an instant in-focus image of your designated target. LaserSharp�® Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 1280 x 960 image Save time - wirelessly sync images directly from your camera to the Fluke Connect system, and attach to an asset record or work order Reduce the need take notes in the field with IR-PhotoNotesâ?¢ and voice annotations

The unique ability of the RTS873 to focus the green laser at the defined measurement distance minimizes the 'laser spread' commonly seen with current total station designs. The Trimble RTS873 is the most advanced solution out of the RTS family, allowing you to layout points every 10 seconds. Ideal for exterior layout as it has the ability to shoot 2,000 feet and larger. The Trimble RTS873 allows you to visualize 3D models in the field using Trimble VISION, so you can see the true size and scope of your project before you begin. The Trimble RTS873 Robotic Total Station allows building construction contractors the ability to more easily collect and layout field points using robotic interaction. In addition to the new total station, the solutions include the new Trimble Field Tablet with multi-touch gesture control that provides a fluid, touch-based interface to 3D models and common layout routines within the Trimble Field Link version 2.0.0 software. By interacting directly with the Trimble VISION live video feed on the Trimble Field Tablet, contractors can remotely view and measure field points within the Trimble Field Link software. This allows contractors to move away from the total station, eliminating the need for manual sighting of points to be measured. The auto-focus green laser pointer provides enhanced visibility and more accurate positioning when using Visual Layout with Trimble Field Link for MEP to lay out overhead hangers or collecting as-built locations in bright daylight conditions. The unique ability of the RTS873 to focus the green laser at the defined measurement distance minimizes the â??laser spreadâ?? commonly seen with current total station designs. The Trimble RTS873 includes a proprietary feature that is a Specialty Contractors game changer, a focused green beam laser. The focused green beam laser marks the exact location with a powerful and very visible laser spot. This in conjunction with Trimble Visual Layout to correct elevations on non-level floors ensures fast and precise layout. The RTS873 also has Trimble VISION, an integrated camera in the robotic total station that provides a â??through the telescope viewâ?? remotely via the Trimble Tablet and Trimble Field Link. Key Features & Benefits Trimble VISION with an integrated digital camera A smarter pointer with a bright green autofocusing laser and autocorrection for uneven surfaces 3 Angular Accuracy Visual Verification To provide accurate documentation of the design and field image that is displayed with the Trimble Field Link Software Robotic communication link 2.4 GHz radio Applications & Specs Visualize 3D models in the field Generate field reports Perform-in field analysis and measurements Uneven surface correction Built for construction layout Prism Technology Integrated workflow

The Trimble RTS873 is the most advanced solution out of the RTS family, allowing you to layout points every 10 seconds. Ideal for exterior layout as it has the ability to shoot 2,000 feet and larger. The Trimble RTS873 allows you to visualize 3D models in the field using Trimble VISION, so you can see the true size and scope of your project before you begin. The Trimble RTS873 Robotic Total Station allows building construction contractors the ability to more easily collect and layout field points using robotic interaction. In addition to the new total station, the solutions include the new Trimble Field Tablet with multi-touch gesture control that provides a fluid, touch-based interface to 3D models and common layout routines within the Trimble Field Link version 2.0.0 software. By interacting directly with the Trimble VISION live video feed on the Trimble Field Tablet, contractors can remotely view and measure field points within the Trimble Field Link software. This allows contractors to move away from the total station, eliminating the need for manual sighting of points to be measured. The auto-focus green laser pointer provides enhanced visibility and more accurate positioning when using Visual Layout with Trimble Field Link for MEP to lay out overhead hangers or collecting as-built locations in bright daylight conditions. The unique ability of the RTS873 to focus the green laser at the defined measurement distance minimizes the â??laser spreadâ?? commonly seen with current total station designs. The Trimble RTS873 includes a proprietary feature that is a Specialty Contractors game changer, a focused green beam laser. The focused green beam laser marks the exact location with a powerful and very visible laser spot. This in conjunction with Trimbleâ??s Visual Layout to correct elevations on non-level floors ensures fast and precise layout. The RTS873 also has Trimble VISION, an integrated camera in the robotic total station that provides a â??through the telescope viewâ?? remotely via the Trimble Tablet and Trimble Field Link. Key Features & Benefits Trimble VISION with an integrated digital camera A smarter pointer with a bright green autofocusing laser and autocorrection for uneven surfaces 3â?³ Angular Accuracy Visual Verification â?? To provide accurate documentation of the design and field image that is displayed with the Trimble Field Link Software Robotic communication link â?? 2.4 GHz radio Applications & Specs Visualize 3D models in the field Generate field reports Perform-in field analysis and measurements Uneven surface correction Built for construction layout Prism Technology Integrated workflow

This is a device for noncontact measurement of natural gas CH4 concentration based on laser absorption spectroscopy When the instrument is working it emits a specific wavelength range the center wavelength is not the same for different gases under testof the detection laser which is diffusely reflected when it ments reflector eg the ground valves pipelines walls etc and part of the laser is returned to the detection unit of the instrument In the beam path if there is a gas leakage of the measured gas to form a gas cloud the gas cloud will be absorbed by the detection laser the amount unabsorbed light and the ratio of the amount of absorbed light and the concentration of the gas cloud into a function of proportionality through the calculation of the ratio of the inverse of the concentration of the gas cloud Features Small size light weight can be put into the pocket Multifunction expansion optional Bluetooth function Miniaturized design and highly integrated microstructure design Specification Shell material ABS Device interface USBType C Input Voltage DC 37V Detecting gases Methane CH4 Detection Principle laser absorption spectrum Detection laser power 15mW Detection of laser safety Class I laser safe for human eyes Detection distance 030 m Detection range 0 to 50000 ppmm Detection error 5 or less Level of Sensitivity 5 ppmm Response time 01s