Description
VGROUT6 is a non-shrink, pourable cementitious grouting mortar with extended working time to suit local ambient temperatures.
- Excellent flowability
- Good dimensional stability
- High strengths, adjustable consistency
Product name: VGROUT6
Compressive strength: M60 (N/mm2) / 60 Mpa / 8700 psi
Mixing ratio:
- 25kgs powder: 4,0L water
- 5kgs powder: 0,8L water
ADVANTAGES
- Easy to mix and apply
- Flowable consistency (according to mix)
- Rapid strength development
- Non-corrosive
- Non-toxic
- Iron and chloride free
- Shrinkage-compensated
- Good pumping properties
Application
- Where exceptional one day and ultimate compressive strengths are required.
- Applications requiring a pumpable grout.
- Non-shrink grouting of machinery and equipment, base plates sole plates, precast panels, beams, columns and curtain walls.
- Grouting of railing posts, foundations, windmills, compressors, etc.
- For grouting rebar, bolts, dowels and pins, etc
- Applications where a non-shrink grout is needed for maximum effective bearing area to transfer optimum load.
Color: Gray powder
Mixing:
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture
- VGROUT6 25kg barrel required approximately 4.0 litres of clean water
- VGROUT6 5kg barrel required approximately 0.8 litres of clean water
The mixed materials is immediately ready to use and should be used within 30-60 minutes after mixing.
Description:
Fairing Coat Mortar: is one component, polymer modified, cementitous mortar based containing silica fume.
Product name: Fairing Coat Mortar
Compressive Strength: â?¥ 20 Mpa (1 day)
â?¥ 50 Mpa (28 days)
Mixing ratio:
- Approx. 5.5 L of clean water per 25 kgs barrel
- Approx. 1.1 L of clean water per 5 kgs barrel
Layer Thickness: Max. 5mm
Pot Life ~ 30 min. (at 27�ºC / 65% r.h)
Usage:
Fairing Coat Motar: is used as repair mortar for minor surface defects on:
- Concrete
- Mortar
- Stone
Fairing Coat Mortar: is a cosmetic mortar designed to eliminate surface defects due to demoulding, pores or honeycombs, and is suitable forsmall repairs on:
- Precast concrete elements
- Fair-face concrete
- Columns and beams
- As levelling mortar and fairing coat or finishing skim coat to concrete, mortar patches and screeds.
Advantages:
- Ready to use requiring only the addition of water
- Excellent workability
- Rapid strength development
- Good mechanical strength
- Good adhesion to substrate
- No corrosive effect on reinforcement steel
- Non-toxic
Packaging: Barrel 5kgs and Barrel 25kgs
Colour: Powder / Grey
Shelf life: 9 months if stored properly in unopened, original packaging.
Storage conditions: Dry, cool, shaded place
Mixing ratio:
Water : (Fairing Coat Mortar) powder = 1:4.0 (parts by weight)
Approx. 5.5 L of clean water per 25kgs barrel.
Approx. 1.1 L of clean water per 5kgs barrel.
Layer Thickness:
Max. 5mm
Pot Life:
~ 30 min. (at 27�ºC / 65% r.h)
Fairing Coat Mortar: should be mechaically mixed in a clean container using a low-speed electric mixer (max. 500 rpm). A minimum mixing time of 3 minutes is recommended to throughly blends the components.
Fairing Coat Mortar: can be applied by spatula or trowel. Work the mixed mortar well into the substrate. Force material against the edge of the repair, working towards the center.
Curing treatment:
To achieve the full potential of any cement based material, curing is essential. In warm or windy weather, the use of standard curing methods are necessary (use of polyethylene sheets or damp hessian) to prevent premature drying out of mortar.
Cleaning of tools:
Remove non-hardened Products from tools and requipment with water. Hardened material can only be remove mechanically.
Description:
VFLOOR1 is a single component Cementitious Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.
Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦
It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles.
Layer-thickness 2-10mm
Can be pumped
Standard primers give excellent bonding to the VFLOOR1 products
Product name VFLOOR1
Compressive strength >40 Mpa, 28 days later
Flexural strength >8 Mpa, 28 days later
Application temperature 5-30 degree
Mixing ratio 20kgs powder + 5.2kgs Liquid
Product name PRIMER
Mixing ratio 2kgs Primer + 2L water + 4kgs cement
Feature & Benefits:
- Single component, just mix with water
- Good adhesion to primed substrates
- Good flow, self smoothing
- Rapid setting and early strength
- Easy and quick to lay
Mixing:
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture.
- VFLOOR1 20kgs barrel required approximately 5.2 litres of clean water
The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing.
Ready for foot traffic after approx. 3 hours.
Drying time:
Prevent draughts across the floor to avoid localized premature drying
At ambient temperature, VFLOOR1 will appear to be dry after approximately 24 hours.
Floor laying may commence after 48 hours.
Coverage:
- At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2
Shelf Life: 9 months.
Sprayed concrete is a fast hardening material for stabilization and support of structures and for concrete applications without using any moulds. Sprayed concrete is an interaction of man, machine and concrete. Man, personified in the work of the nozzleman, requires technical skills and dedication to the job. The operator must be able to rely fully on the machine and the sprayed concrete material. It is the interaction and quality of these components that finally determines the success of the sprayed concrete application Sprayed Concrete has many advantages
Application to any elevations because sprayed concrete adheres immediately and bears its own weight
Can be applied on uneven substrates
Good adhesion to the substrate
Totally flexible configuration of the layer thickness on site
Concreting without formwork
Reinforced sprayed concrete is also possible (mesh/fiber reinforcement)
Rapid load-bearing skin can be achieved without forms or long waiting times.
Sprayed Concrete Applications:
- Excavation stabilization in tunnneling and mining construction
- Slope and trenching stabilization
- Protective lining
- Concrete repair (concrete replacement and strengthening)
- Special lightweight load-bearing structures
- Restoration of historic buildings (stone structures)
- Sealing works
- Construction of swimming pools
User Notes:
The technical details and recommendations contained in this data sheet are given in good faith and represent the best of our knowledge and experience at time of priting. It is the responsibility of the user to ensure that the products are used in accordance with Sprayed Concrete Products instruction.
Consumption:
6 kgs Additives /100 kgs cement
Shelf Life:
Storage in dry conditions, raised above floor level and temperature range of between 5�ºC and 30�ºC. The usable shelf life shall be approximately 9 months.
Safety Data:
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuff
Packaging: 25kg/barrel
DESCRIPTION:
Stop Leak is a liquid admixture when mixed with portland cement becomes an extremely rapid setting plastic material used to stop pressure leaks in concrete and masonry structures.
USES:
Stop Leak can be used to stop water leaks in dams, foundation walls, manholes, pipelines, underground structures, swimming pools, foundtains, tunnels, basement walls and floors.
ADVANTAGES:
Will stop water under pressure.
ECONOMICAL:
Sets within 60 to 90 seconds, generates minimal heat when setting
Becomes extremely plastic when combined with portland cement
Stop Leak liquid must be stored at temperatures above freezing.
MIXING RATIO:
1Kg Stop Leak : 2,8 kgs cement (2,2 pounds Stop Leak : 6,17 pounds cement)
LIMITATIONS:
Judgment must be used to mix Stop Leak in small quantities due tu the extremely rapid set. After the portland cement is added to the liquid Stop Leak, the mixed compound will set in approximately 60 seconds. This action allows the material to bond mechanically and chemically to saturated surfaces. A delay in setting, if required, can be attained by adding fine sand to the neat cement mixture or by reducing the amount of cement added to the liquid.
Safe
- Odorless, non-toxic, does not affect the health of users and the environment
- Should wear gloves and necessary protective equipment when using
- If splashed into eyes, use clean water or eye drops to wash several times
Storage conditions
Product must be stored in original unopened and undamaged sealed packging in dry conditions.
Colour: Clear liquid
Shelf life
12 months from the production date
Packaging
- Stop Leak 0,5Kg (1,1Pounds)
- Stop Leak 2,5Kg (5,51Pounds)
- Stop Leak 6,5Kg (14,3Pounds)
149047 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
Mullite refractory castable general use of mullite aggregate to as raw materials and configuration of a kind of low temperature in the insulation refractories, it is commonly used in the petrochemical industry tube furnace, light diesel oil, ethane cracking furnace lining, atmospheric and vacuum furnace and sulfur recovery device and steam boiler, tortoiseshell net heat insulation layer, two barrel and pipe insulation monolayer, and other industrial furnace door, see the fire hole, observation hole door lining, etc.
The advantage of mullite refractory castable is that its refractory temperature is higher than other thermal insulation castable, which can be directly in contact with the flame and used as the lining of the kiln.
Another kind of refractory castable is corundum mullite castable, which is a refractory castable prepared with corundum as aggregate and powder plus some binder.It has higher mechanical strength and abrasion resistance than high alumina refractory and Mullite refractory, but less thermal shock resistance.
Compose A Joint Usg Boral - Ready Mix Joint Compound All Purpose
Joint Compound Is Usually Sold Pre-mixed. This Product Is Used For Almost Every Drywall Installation And Repair. Joint Compound Is Used To Finish Drywall Joints And Corners. It Provides Faster And Superior Performance In Joint Closure. It Is Also Useful For Repairing Cracks And Holes In Existing Plasterboard And Plaster Surfaces. You Can Save Time By Using Joint Compound Cause It Does Not Need To Any Extra Process. It Is Ready To Use. It Takes 6 To 12 Hours To Dry, Depending On The Humidity And Temperature.
Turkey Is One Of The World's Leading Country In The Gypsum Resources And Production Of Gypsum. As Board And Wall Company; We Export Highest Quality Of Gypsum Powder And Joint Compound All Around The World.
It is a kind of new type tile grout, it can be used in all the joints of ceramic tile, glass, stone, mosaic on the wall or floor in bathroom, kitchen, swimming pool,etc indoor & outdoor. Never yellowing or black, easier construction, waterproof, moisture proof, mould proof.
CMI Latex Admix 350 is a ready to use, water-based emulsion polymer specially formulated for use with CMIâ??s range of cement-based tile adhesive and cement sand screed or render. It is suitable for internal general area only. Mortar modified with CMI Latex Admix 350 will have better physical and chemical properties.
USES:
#As an additive to improve flexibility and bonding strength of cement-based tile adhesive.
#As an additive to improve mechanical and bonding characteristics of cement mixes for screeds, renders, etc.
MikaZone Hydroxypropyl Methyl Cellulose (HPMC) is a non-ionic cellulose ether made from natural polymer material cellulose through a series of etherification. It is a white powder that swells in cold water into a clear or slightly turbid colloidal solution. It has the characteristics of thickening, dispersion, emulsification, film formation, suspension, adsorption, surface activity, moisture retention and protective colloid.
Magna Green is an Excellent Quality, Unique Developed Coating, and Cost Effective. Wall Putty Suppliers Leading Company Magna. Wall Putty Utilized for Both Interior as Well as Exterior Finishing of Walls. T-putty
HPMC is a type of non-ionic cellulose ether, white powder appearance, odorless and tasteless, soluble in water and most polar organic solvents. Its water solution has a surface activity, high transparency, stable performance. HPMC has a thermal gel properties, after heating, the product solution formed the gel precipitation, dissolving after cooling. Different specifications products have different gel temperature. Solubility changes with viscosity's difference. The lower viscosity, the higher solubility, different specifications HPMC have difference in properties, dissolving HPMC in water won't be affected by PH value.
Steel fiber castable is widely used in high temperature vulnerable parts of metallurgy, building materials and circulating fluidized bed boilers.As follows: according to the classification of the material, it is suitable for planning the corundum quality before and after the steel fiber reinforced castable first used in large cement kiln kiln and other industrial kiln lining, high aluminum and corundum mullite stone steel fiber reinforced refractory castable first used in the cement kiln kiln mouth, wicket cover, before and after cooling machine in high temperature resistant parts and other industrial kiln liner.
Non-stick aluminum refractory castable or non-stick castable, the non-stick aluminum castable combines with the feature of inorganic binder, add a certain amount of insoluble in aluminium new composite refractory material, control the liquid aluminum erosion of refractory, non-stick aluminum castable with high volume density, high strength, not for the nature of the aluminum liquid wetting, can significantly reduce the corundum phase anomaly grew up and molten metal and permeability of materials.Suitable for the bottom of aluminum melting furnace, wall of furnace, slag-scraping slope, chute, aluminum water bag and degassing box, etc.
High alumina castable is a refractory castable made of high alumina raw material with binder and aggregate in traditional ratio.On the basis of the preparation of high strength and high aluminum castable, the granule gradation is adjusted, different admixtures are added, cement dosage is reduced, performance is improved, medium temperature strength and softening temperature under load are increased, thermal conductivity is reduced, and thermal stability is good.The furnace body structure integrity is strong, the air tightness is better than the brick furnace, extends the furnace life, saves the furnace repair cost, the economic benefit is remarkable as the high aluminum refractory castable characteristic.
The improvement of the performance of low cement casting material is actually the application of micro powder technology.
There is a gap between the stability of low cement castable and that of laboratory castable.Low cement castable easy to occur problems are: 1, poor construction performance, poor liquidity;2. The hardening speed varies greatly, and there is quick setting or non-setting;3, easy to burst in baking;4. Abscission occurs;5. Low strength and poor wear resistance.These are caused by refractory castable products abnormal damage and other quality problems.
Low cement refractory castable itself in addition to wear resistance, refractory aggregate, is used with good raw materials fine powder and ultrafine powder, cement and admixture, etc., through adjusting the proportion of each component, improve the high temperature performance of castable, thereby improve the strength of refractory castable.
Low cement castable key construction, should pay attention to is: (1) do not arbitrarily increase the water content of refractory castable, (2) mold support set too high, leading to castable water content is too large and vibration compaction;(3) No mold shall be set during lining construction of feeding pipe, and castable material shall be manually daubed;(4) In order to save the mold, the maintenance is less than 48 h to remove the mold, resulting in the casting cracking or internal damage;(5) The material, shape, size, welding quality, quantity, anti-expansion treatment and unreasonable expansion joints of the anchoring parts;Do not follow the operational sequence of dry stirring, wet stirring and feeding, directly mix the dry and wet materials, resulting in the castable is not fully mixed evenly, part of the material is not wetted by water, making the castable has no strength.
There are also key water issues, to use tap water, to avoid the introduction of acid and base impurities, gradually add, in order to make the dispersant in the powder to play a full role.Excessive water addition will directly lead to a significant decline in the strength of refractory castable construction, and in the field construction the water addition tends to exceed the degree of artesification.The pouring body itself is easy to appear when the ambient temperature rises rapidly, the baking burst, resulting in large area of damage.Once the temperature of the castable itself is below 5 the castable will still have no strength even after curing for 24 hours.The construction and maintenance shall be carried out in strict accordance with the 48-hour mold removal mechanism. In dry areas, water and wet maintenance shall be carried out; in cold areas, airtight heating maintenance shall be realized within 48-hour maintenance to ensure the maintenance temperature.
In a word, if the above points can be achieved step by step in accordance with the requirements, it will certainly improve the performance of low cement casting.
Steel fiber has good tensile strength, strong grip strength and high hardness.If steel fiber is mixed in castable, the steel fiber castable products produced by this method are not only used, wear resistant, tensile and compressive, but also have a good anti-theft effect.And its adaptability and operational planning will be wider.It can be used at different temperatures.Greatly improved product utilization rate.So now large kilns, melting furnaces and so on will mostly choose steel fiber castable.Is to travel the quality of the product and use of life, compared to down, such a product more affordable.
Steel fiber castable can reduce the shrinkage of castable during curing, grilling and high-temperature use. After adding steel fiber, not only the toughness of castable can be improved, but also the impact and mechanical strength of the machine can be improved.After adding steel fiber, the thermal shock performance of castable is improved.The steel fiber castable prevents fracture or spalling by preventing microcrack and mechanical stress.
Steel fiber castable is widely used in high temperature vulnerable parts of metallurgy, building materials and circulating fluidized bed boilers.As follows: according to the classification of the material, it is suitable for planning the corundum quality before and after the steel fiber reinforced castable first used in large cement kiln kiln and other industrial kiln lining, high aluminum and corundum mullite stone steel fiber reinforced refractory castable first used in the cement kiln kiln mouth, wicket cover, before and after cooling machine in high temperature resistant parts and other industrial kiln liner.
"uniquely-designed wallboard".
Our products are quite different from conventional wallboards in all terms.
If you make a serious comparison test between Wingwing board and others',
you will be deeply impressed with its fantastic features and amazing quality.
-Interior MgO wallboard / PPP board for bathroom
It delivers unique features firstly developed and patented in the world.
It is designed for luxurious interior wallcovering like marble.
It is also very suitable for interior re-modelling market.
For indoor wallcoverings ( on concrete wall, tile, plaster. gypsum, plywood etc.),
partition, corridors, interior cladding, kitchen wall,etc.- / Bathroom
149047 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
