Description:
Repair 1 : is a one component cement based polymer modified high build repair and reprofiling mortar
Usage:
- For repairing all types of structures
- Overhead and vertical repairs
- Hand applied repairs
- For exterior and interior use
Advantages:
- Just add water
- Can be used on horizontal and vertical surfaces
Surface Preparation:
- The surface must be clean, dry, smooth and solid.
- Particles hampering adhesion like dirt, oil and paint must be removed from the surface.
- Highly absorbent surfaces must be saturated with water before application. No water accumulation should be left on the surfaces.
Colour: Grey
Shelf Life:18 months from date of production if stored properly in original, unopened and undamaged sealed pack.
Storage Conditions: Store in dry conditions. Protect from moisture and direct sunlight.
Packaging: 25kg/barrel and 5kg/ barrel
Description
Crack PU is a 2-component, 100% solids, moisture-tolerant, epoxy adhesive. It is a low-viscosity, high-strength adhesive formulated specifically for grouting both dry and damp cracks.
Where To Use
Use neat for gravity feed or pressure injection of cracks in structural concrete, masonry, wood, etc.
Seal interior slabs and exterior above grade slabs from water, chlorides and mild chemical attack and to improve wearability
Advantages
- Tenacious crack-sealing grout.
- Convenient easy mix ratio A:B = 2:1 by volume.
- Advanced low-viscosity structural resin.
- Unique, high-strength adhesive for (canâ??t dry) cracks.
Usage
Crack PU is used to fill and seal cavities and cracks in structural components such as columns, beams, foundations, decks and waterretaining structures. It not only forms an effective barrier against water infiltration, but also bonds the concrete sections, together, thereby restoring original structural strengths.
Shelf life
Expiry date 18 months from the production date
Storage conditions
Dry, cool, shaded place
Packaging
1) Combo A: 2kgs - B: 1kg
Component A is clear liquid: 2kgs/ plastic can
Component B is clear liquid: 1kg/plastic can
2) Combo A: 5kgs - B: 2,5kgs
Component A is clear liquid: 5kgs/ plastic can
Component B is clear liquid: 2,5kgs/plastic can
3) Combo A: 10kgs - B: 5kgs
Component A is clear liquid: 10kgs/ plastic can
Component B is clear liquid: 5kgs/plastic can
4) Combo A: 20kgs - B: 10kgs
Component A is clear liquid: 20kgs/ plastic can
Component B is clear liquid: 10kgs/plastic can
5) Combo A: 30kgs - B: 15kgs
Component A is clear liquid: 30kgs/ plastic can
Component B is clear liquid: 15kgs/plastic can
Description
Hardener Liquid: is Dustproof, shiny, sodiium silicate-based water repellent liquid surface hardener designed for application to concrete and cement based floors. It penetrates deeply into the surface zone of the concrete and provides permanent hardness.
Applications
- Airplane hangars
- Electronic assembly plants
- Manufacturing plants
- Warehouses and distribution centers
- Shipping and receiving areas
- Maintenance facilities
- Commercial and industrial floors
- Where light-reflective flooring is desired
- Floors subject to heavy or frequent traffic
- Multi-purpose sporting facilities
Application steps
Preparation: Grinding of concrete floors by sandpaper grinder and take away all debris, cement powder on the floor surface and then clean it
Spray onto the concrete surface. Spray 2 coats. Each spray is 24-48 hours apart
Important Note
- If the paint becomes stagnant can appear white chalk phenomenon
- If the layer is too thick it will can not dry out
Storage Conditions
Product must be stored in original, unopened and undamaged sealed packaging in dry conditions
Colour
Clear
Shelf Life
12 months from date of production
Consumption
- 3kg Liquid: approximately application 15 m2
- 7,8kg Liquid: approximately application 40 m2
- 30kg Liquid: approximately application 150 m2
Description
VOG is one component, premixed, modified polymer cement based tile adhesive
used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion.
Where to use:
- For wall surface: To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering.
- For floor and ground: To bond ceramic tile or building stone.
Advantages
- Stable performance, use directly after mix it with water;
- Good flexibility
- Nontoxic, non-radiant, no irritative odor;
Application
Surface Preparation:
- The surface should be vertical, flat, smooth and free of dust, grease and other contaminants.
Mixing
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture
- VOG 25kg barrel required approximately 5 - 6,0 litres of clean water
- VOG 5kg barrel required approximately 1 - 1,2 litres of clean water
The mixed materials is immediately ready to use and should be used within 25-30 minutes after mixing.
Storage Conditions: Keep in cool and dry places
Packaging: 25kg/barrel and 5kg/ barrel
SHELF LIFE: 09 months
VN SEAL 109 is a liquid applied, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system with moderate to high degree of elasticity depending on system buildup
Advantages
- Crack-bridging & Elastic
- Good Impermeability against water ingress
- Highly water resistant, arrest salt petre and prevent carbonation
- Extremely good bonding with high abrasion resistance
- Simple application and fast curing
- It has excellent adhesion to concrete, brickwork and corrugated asbestos cement sheets
Appication
- Used as a seamless, impervious coating on flat roof for both exposed and concealed waterproof coating system
- Basements
- Water retaining structures
- Underground concrete structures, pits, basins, sumps etc.
- Used as waterproofing coating on concrete, screed, mortar, brick tiles, cement tiles, plaster or porous stone substrates
Packaging
1) Part (A+B) : 28 kg ready to mix units x 2 sets
Part A is grey power: 20kg/Barrel
Part B is white milky liquid: 8kg/Barrel
2) Part (A+B) : 14 kg ready to mix units x 2 sets
Part A is grey power: 10kg/Barrel
Part B is white milky liquid: 4kg/Barrel
Shelf life
12 months from the production date
Storage conditions
Keep in cool and dry places
VNSEAL 104W is a two component, white colour, flexible cementitious waterproofing membrane consisting of a synthetic resin mixed with a blend of selected cement and well-graded fillers.
When mixed, VNSEAL 104W becomes a smoooth slurry and is easily applied by brush, roller or suitable spraying equipment.
VNSEAL 104W can be applied onto damp substrates. The cured membrane is flexible, durable and weather resistant and has excellent adhesion to most building substrates. Its unique chemical structure provides a breathable membrane that is permeable to water vapour and yet impermeable to water. VNSEAL 104W is capable of bridging hairline cracks.
Typical Uses:
Waterproofing of Basement walls and lift pits
Waterproofing of potable water tanks, waterproofing of reservoirs, culverts, storm drains, canal, water retaining and water excluding structures.
Waterproofing of kitchens and toilets
Waterproofing of balconies and planter boxes
Waterproofing of swimming pools and water features
Waterproofing to precast gable end walls
Waterproofing to RC flat roof (re-roofing-exposed and concealed applications) and gutters.
Waterproofing to external wall prior to installation of claddings.
Advantages:
Pre-packed Easy to mix and apply
Excellent waterproofing qualities â?? able to withstand high hydrostatic pressure
Excellent adhesion to concrete, masonry, ceramics, natural and artificial
Flexible able to bridge hairline cracks up to 2mm
Does not contain chloride or other corrosive salts which cause efflorescence
Non toxic- suitable for use in waterproofing of potable water tanks
Able to withstand light foot tracfficking
Can be applied onto damp substrates
Weathering resistant
Mixing Instructions:
Pour Part A (liquid) into Part B (White powder)container and mix with a slow speed mechanical mixer until homogenous and lump free. Allow the mix to stand for 5 minutes and re-stir manually before use.
Application:
For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane
Apply the first coat of VNSEAL 104W and allow it to dry. At the same time, ensure that all joints and corners are properly coated, preferable with a brush. Allow membrane to dry for approximately 2 hours before application of the second coat
VNSEAL 104W the professionals choice of quality products and system for building construction
Shelf life
Expiry date 12 months from the production date
Storage conditions
Dry, cool, shaded place
Packaging
1) Combo A: 4kg - B: 2kg
Component A is White powder: 4kg/barrel
Component B is milky white liquid: 2kg/plastic can
2) Combo A: 10kg - B: 5kg
Component A is White powder: 10kg/barrel
Component B is milky white liquid: 5kg/plastic can
3) Combo A: 20kg - B: 10kg
Component A is White powder: 20kg/barrel
Component B is milky white liquid: 10kg/plastic can
VNSEAL 104 is a two component, flexible cementitious waterproofing membrane consisting of a synthetic resin mixed with a blend of selected cement and well-graded fillers.
When mixed, VNSEAL 104 becomes a smoooth slurry and is easily applied by brush, roller or suitable spraying equipment.
VNSEAL 104 can be applied onto damp substrates. The cured membrane is flexible, durable and weather resistant and has excellent adhesion to most building substrates. Its unique chemical structure provides a breathable membrane that is permeable to water vapour and yet impermeable to water. VNSEAL 104 is capable of bridging hairline cracks.
Typical Uses:
Waterproofing of Basement walls and lift pits Waterproofing of potable water tanks, waterproofing of reservoirs, culverts, storm drains, canal, water retaining and water excluding structures.
Waterproofing of kitchens and toilets
Waterproofing of balconies and planter boxes
Waterproofing of swimming pools and water features
Waterproofing to precast gable end walls
Waterproofing to RC flat roof (re-roofing-exposed and concealed applications) and gutters.
Waterproofing to external wall prior to installation of claddings.
Advantages:
Pre-packed Easy to mix and apply
Excellent waterproofing qualities able to withstand high hydrostatic pressure
Excellent adhesion to concrete, masonry, ceramics, natural and artificial
Flexible able to bridge hairline cracks up to 2mm Does not contain chloride or other corrosive salts which cause efflorescence Non toxic- suitable for use in waterproofing of potable water tanks
Able to withstand light foot tracfficking
â?¢ Can be applied onto damp substrates
â?¢ Weathering resistant
Mixing Instructions:
Pour Part A (liquid) into Part B (powder)container and mix with a slow speed mechanical mixer until homogenous and lump free. Allow the mix to stand for 5 minutes and re-stir manually before use.
Application:
For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane
Apply the first coat of VNSEAL 104 and allow it to dry. At the same time, ensure that all joints and corners are properly coated, preferable with a brush. Allow membrane to dry for approximately 2 hours before application of the second coat
VNSEAL 104 the professionals choice of quality products and system for building construction
Shelf life
Expiry date 12 months from the production date
Storage conditions
Dry, cool, shaded place
Packaging
1) Combo A: 4kg - B: 3kg
Component A is Grey powder: 4kg/barrel
component B is milky white liquid: 3kg/plastic can
2) Combo A: 10kg - B: 7,5kg
Component A is Grey powder: 10kg/barrel
component B is milky white liquid: 7,5kg/plastic can
3) Combo A: 20kg - B: 15kg
Component A is Grey powder: 20kg/barrel
component B is milky white liquid: 15kg/plastic can
NUMBER 1 : is a unique chemical treatment for the waterproofing, protection and repair of concrete.
The barrel 5kgs is ideal for small projects.
NUMBER 1 : is the most chemically active product within the Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints, and honeycombs.
NUMBER 1 : prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of the concrete and cement-based materials.
Advantages:
- Less costly to apply than most other methods
- Can be used on damp substrates
- Resists extreme hydrostatic pressure
- Becomes an integral part of the substrate
- Can seal hairline cracks up to 0.4mm
- Allows concrete to breathe
- Chloride-free
- Highly resistant to aggressive chemicals
- Non-toxic
- Does not require a dry surface
- Cannot puncture, tear or come apart at the seams
- No costly surface priming or leveling prior to application
- Does not require protection during backfilling or during placement of steel, wire mesh or other materials
- Not subject to deterioration
- Permanent
Application:
- Reservoirs
- Sewage and Water Treatment Plants
- Underground Vaults
- Secondary Containment Structures
- Foundations
- Tunnels and Subway Systems
- Swimming Pools
- Parking Structures and Roof Decks
Colour: Grey
Shelf Life: 09 months
Packaging: 25kg/barrel and 5kg/ barrel
Cable Grout
Industry standard high performance grout for the grouting of cables in post-tensioned concrete, void and fissure grouting, etc.
Description
A specially formulated Portland Cement shrinkage-compensated powder mix designed for the grouting of cables in post-tensioned concrete. The material readily mixes with water to produce a particularly fluid flowing grout which will penetrate and fill fine voids within and around the cables then harden without shrinking to give a high strength product.
Uses include grouting of cable ducts, voids and fine fissures, support of cable anchor plates and ground anchors. Also to provide bearing or contact between structural elements, for grouting behind shafts and tunnel linings, and for underpinning, loose floor and road slabs.
Once hardened and cured, high compressive strengths are achieved giving resistance to static and dynamic stresses. Cable Grout has a total chloride, sulphate and sulphide-ion content below that specified
Advantages
Does not contain aluminum powder nor any components which generate hydrogen gas, cardon dioxide or oxygen.
Silica fume enhanced for low permeability.
Non-metallic; will not stain or rust. Non-corrosive; does not contain chlorides.
Zero bleed, even at high flow
Excellent for pumping: Does not segregate, even at high flow. No build-up on equipment hopper.
Superior freeze/thaw resistance.
Even with his great fluidity, it can disperse water (thixotropic)
Preparation
- Genetic tubes must be cleaned with a high-pressure air compressor
- Check the vents and pressure test for gen tubes
- Repair leaks before grouting pumb
Mixing
- Water : mortar powder = 1 : 3.4 parts by weight. (6.8 litres of water per barrel)
- With volume 15 liters: Use a colloidal solution mixer (to get the best results)
Add water and continuously mix for 5 minutes to achieve a uniform
Continue to maintain slowly mixing during grout pump
Important Note
Non mixing by hand
Yield
As a guide 1 barrel yields approximately 14 litres of mortar
Shelf Life: 9 months
Packaging: 25kg/barrel
Storage Conditions
- Store properly in dry conditions in undamaged and unopened original sealed packaging
Cleaning of tools
- Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed
