PP Fiber-Polypropylene Fiber is made from 100% virgin PP granular, after extruding from different mould and technology, EipponCell can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects. Basic Info Model NO. 3mm-19m Acid, Alkali & Salt Resistance Extremely Strong Crack Elongation 15-20% Length 6mm/12mm/19mm etc Model Number Monofilament Use Concrete Tensile Strength 450MPa, 500MPa Min Elastic Modulus 3500MPa Elongation at Break 15%-25% Fiber Diameter 0.03+/-0.005mm Acid &Alkali Resistance High Quality Trademark YiBang Transport Package 20kg/Bag Specification 3mm-19mm Origin China HS Code 550340 Product name PP Fiber Diameter 18 microns, 34 microns Length 3mm, 6mm, 12mm, 18mm, 52mm... Tensile Strength >450Mpa (normal strength) >600Mpa (high strength) Crack Elongation 15-20% Acid & Alkali Resistance Strong
Characteristics Chemistry Polypropylene Fiber is a kind of high intensity bunchy monofilament fiber mainly made of polypropylene by special technique which could effectively prevent concrete microcrack as well as improve concrete performance of anticrack antiinfiltration anticoncussion and anti shock Specification Material Polypropylene Type Bunchy monofilament Color White Identical Diameterm 16182535other Elongation at Break 15 Lengthmm 36912151950 1 Modulus of ElasticityMPa 3500 Tensile Strength MPa 330 Densitygcm3 091093 Acid Alkali Resistance Strong Melting point 160180 Note The range of length is 350mm and according to clients demand Application Polypropylene fiber into concrete or mortar could effectively prevent temperature change and Microcrack which is caused by plastic and dry shrinkage Projects like concrete roadbridgeairport road and factory floor which strictly require cracking resistance They are widely used in roads bridges underground waterproof projects and roof walls pools basements of civil construction industrial Packing 124kg plastic bag600grams40bags inner 2Bulk package 3As clients requested Storage To be stored in its closed original packagekeep cool and dry avoid humidity
PP staple fiber is widely used in Auto Interior non woven , Geotextile, spun yarn etc. our fiber is suppling to famous car manfuactory (BMW, BENZ, TOYOTA, HONGDA , HYUNDAI ETC), Main spec: 1.5~15d 38~76mm color: raw white, black, green , yellow, bronw, blue etc extra- funtion hydrophobic , hydorphilic
ES fiber is produced by composite spinning technology with sheath-core structure, sheath is PE, and core is PET or PP. During heat processing, sheath components are melted and adhered to stick fiber together, but core will be there to keep good resilience and shaping. It's used for nonwoven fabric, applied to medical (facial mask), hygiene products (baby diaper, women sanitary napkins, filter industry, etc. Functional ES Fibers:� -- Hydrophilic -- Durable Hydrophilic -- Hydrophobic -- Anti-bacterial -- Dope Dyed Colors
Product Polyester Staple Fiber Material 100% Polyester Color:White, Black, other Dope Dyed Colors Denier:0.5D/0.7D/0.8D/0.9D/1.2D/1.4D/1.5D/2D/2.5D/3D/6D...15D Length:8mm/12mm/16mm/25mm/32mm/38mm/ 44mm/51mm/64mm/76mm...120mm Quality Grade:100% Virgin, Semi-Virgin, Recycled(GRS Certified) Type:Solid, Hollow Package: Pressed bales Package, Bale Weight about 300KG Sample: within 500g free
virgin polyester staple fiber 1.2-1.4d 38mm psf fiber Application: 1. yarn spinning, open end spinning and ring spinning, sock yarn, mop yarn 2. needle punch nonwoven, for geotextile, automotive interior, exhibition carpet, trunk nonwoven, insulation panels.
Commonly used as a binder fibre in core-sheath constructions, our Polyester Low Melt LMF (CoPET/PET) fibre bonds to other polyester fibres to produce wadding, insulation, filtration, automotive, and other products where heat is used to bond the fibres. This fibre is normally blended with solid polyester fibres or recycled materials.
High Tenacity or Medium Tenacity Recycle Polyester Staple Fiber (white or black fiber) (Nearing to Virgin fiber)
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM
