1.The mixing chamber is of chilled structure with quick and better heating/cooling effects. The inner wall is coated with hard chrome for long service life.. 2.Build-up welding of hard alloy for the two, three, four ridge top and two sides of the rotor, all the working surface are coated with hard chrome, good appearance and abrasive resistantce, the cooling/heating medium can pass through the hollow of the tangent linear type, mesh type, and synchronization type rotor. 3.Constant hydraulic pressure seal structure is used for the top of the rotor and the seal effect is good with long service time thanks to high pressure lubrication automatic alarm for used up of oil. 4.The upper bolt relieves the pressure automatically to protect the machine and for long service time if the machine work for too long time under overload condition. 5.The working surface of up and down bolts are coated with hard chrome, good appearance and abrasive resistance. The cooling/heating medium can pass through the inner hollow of down bolt. 6.A rotary oil cylinder is used for the discharge door, smooth running and accurate positioning. 7.Use two shafts put-out hard teeth reducer and gear coupling or "+" type universal joint, the transmission is smooth with high effciency, low noise level and long service life.
in operation; due to the different revolving speeds of the two relatively rotated rollers, the temperature of the working surface is also slightly different; then the raw materials on the roller surface gradually become soft along with the increasing temperature due to the heat conduction and fiction effect of the roller, stick to the roller surface and rotate with the roller. When these raw materials enter into the gap on the working surface of two rollers, due to the small gap between the roller surfaces, and the revolving speeds on the two roller surfaces are different, the materials suffer from the strong extrusion, shear, and kneading action; due to the complex motion among the raw materials, the raw material produces a certain amount of friction heat in itself; in addition, the surface of the roller also has the conductive heat. Due to the combined action between these internal factors and external conditions, the raw materials on the roller become softened and in mixed plasticization and molten state; in addition, the operator will constantly stir up the raw materials among the rollers, so that the raw materials can be mixed and plasticized uniformly. At the moment, the raw materials can be delivered to the calendar and rolled into the products.
r requested Surface treatment Smooth, brushing, sanding, embossing, per requested Material Wood plastic composite Application Garden, lawn, balcony, corridor, garage, pool & spa surrounds, boardwalk, playground. Certification Ce/iso/sgs Installation Fasteners/nail into edgen/nail into full-face 2. Main features of composite decking floor A. Nontoxic, harmless B. Smooth veneer with the appearance of natural wood C. Rich and complementary colors D. Water proof, scratch resistant, impact resistant, corrosion resistant E. Anti-insect, anti-mildew F. Slip resisant, flame resisant G. Barefoot friendly H. One-stop service, not only make the mold, but also produce the production I. Customizing according to the design 3. Certification of composite decking floor A. Our company has passed the iso certification B. Our company has got the reputation of landscaping industry association C. Our products have passed ce certification of eu, sgs certification and have passed test by china national test center of polymer& building materials. Any further information of best seller of waterproof outdoor decking&flooring board can be inquired Standard length: 2.2m/pc, 2.7m/pc, 5.4m/pc Dimensions: 150x25mm, 150x20mm
1) products: cheap grey granite kerbstone 2) size: all sizes are available according to your requirements. 3) surface: bush hammered, flamed, natural split, etc. 4) packing: standard seaworthy wooden pallets with fumigation. 5) service: competitive price, high quality, prompt quoting and delivery 6) payment: t/t, l/c
1) products: cheap grey granite kerbstone 2) size: all sizes are available according to your requirements. 3) surface: bush hammered, flamed, natural split, etc. 4) packing: standard seaworthy wooden pallets with fumigation. 5) service: competitive price, high quality, prompt quoting and delivery 6) payment: t/t, l/c
Weight (T) 5.75 Bucket capacity (m3) 0.22 Engine model YANMAR 4TNV94L-SSN Power (kw/r/min) 35.5/2200 Fuel tank capacity (L) 100 Travel speed (km/h) 4.2/2.2 Slewing speed (r/min) 9.5 Gradeability (%) 70 Bucket digging force (KN) 38.5 Ground pressure (KPa) 33.5 Hydraulic pump model AP2D25LV1RS7 Max. flow (L/min) 11110+35.6+9.9 Work pressure (MPa) 22.6 Hydraulic tank volume (L) 80. Overall length (mm) 5960 Overall width (mm) 1906 Overall height (mm) 1995 Overall height (mm) 2690.
Detailed Product Description 0.4wheel loader 1) CE or EPA; 2) Engine: Xinchai, Changchai; Weichai 3) Rated loading: from 1T to 5T 4) Bucket capacity Wheel loader: 1. Using direct injection diesel engine as power, with easy startup and low oil consumption 2. Using special drive axle, with strong ability to overcome obstacle 3. Chassis uses hinged structure, with small turning radius and flexible turning, which applies to the operation in narrow space 4. This machine uses hydraulic operation, with simple structure, convenient operation, good performance and reliable quality 5. Widely applying to the construcction of agricultural engineering and small and medium building such as road, coal mine, brickyard, urban construction, kiln factory, stone material factory, prefabricated cement parts factory, etc. Specification of ZL08A Wheel Loader: 1.0 Engine Details: (1) Model: Changcai L22 (2) Engine type: In-line arrangement, water-cooled, one-cycle diesel Engine (3) Rated Power: 15.5KW (21.08 HP) (4) Rated Speed: 2200 r/min (rpm) 2.0 Steering System (1) Cycloid full hydraulic steering system: BZZ-80 (2) System Pressure: 10MPa 3.0 Bucket (1) Bucket Capacity: 0.4 m3 (2) Bucket width: 1300mm (3) Max. Breakout Force: 21KN (4) Rated Load: 800kg (5) Operating Weight: 2000kg 4.0 Overall Dimensions (1) Overall Length (Bucket on ground position): 4480mm (2) Overall Height (a) Ground to Cab Top: 2200mm (b) Ground to exhaust pipe: It is below from the top of cabin (3) Overall Width: 1400mm 5.0 Operating Specifications (1) Drive Means: Rear-wheel drive (2) Min Turning Radius: 3000mm (3) Driving System: mechanical (4) Dumping Height: 2300mm (5) Dumping Reach at max height: 900mm (6) Min the ground distance: 220mm (7) Time of raise: 4.5sec. (8) Hydraulic cycle time: 9second. 6.0 Brake System (1) Service Brake: Mechanical brake (2) Parking Brake: Hand operated. 7.0 Tyre (1) Model: 7.50-16 (2) Width: 18cm (3) Diameter: 78cm. 8.0 Wheelbase: 1620mm 9.0 Track: 1160mm. 1 sets in 1*20gp, 3sets in1*40hc.
Detailed product description: Mini wheel loader CE Certification Rated load: 800kg Engine: Weichai,Xinchai,Changchai Strong ablity to overcome obstace. 1) CE Certification 2) Rated load:800kg 3) Engine:Weichai, Xinchai,Changchai ; 4) Strong ablity to overcome obstace Specifications of ZL08B Wheel Loader: 1.0 Engine Details: (1) Model: Changcai L24 (2) Engine type: In-line arrangement, water-cooled, one-cycle diesel Engine (3) Rated Power: 17KW (23.12 H.P.) (4) Rated Speed: 2200 r/min (rpm) (5) Fuel Consumption ratio in standard working condition: 269g/kw.h 2.0 Steering System: (1) Cycloid full hydraulic steering system: BZZ-80 (2) System Pressure: 10MPa (3) Steering Cylinder: 76x 63x160 (4) Speed (a) Forward shift (forward I): 7.19 (b) Forward shift (forward II):3.35 (c) Reverse shift (Reverse I):7.19 (d) Reverse shift (Reverse II): 3.35 3.0 Bucket (1) Bucket Capacity: 0.4 m3 (2) Bucket width: 1300mm (3) Bucket type: Heavy-duty bolt on teeth (4) Max. Breakout Force: 22.5KN (5) Rated Load: 800kg (6) Operating Weight: 2000kg 4.0 Overall Dimentions: (1) Overall Length (Bucket on ground position): 4480mm (2) Overall Height (a) Ground to Cab Top: 2200mm (b) Ground to exhaust pipe: It is below from the top of cabin (c) Dumping Height: 2300mm (3) Overall Width: 1400mm 5.0 Operating Specifications (1) Drive Means: Two-wheel drive (2) Min Turning Radius: 3000mm (3) Driving System: mechanical (4) Dumping Reach at max height: 900mm (5) Min Base to the ground: 220mm (6) Time of raise: 4.5sec. (7) Hydraulic cycle time: 8.5sec. 6.0 Brake System (1) Service Brake: mechanical brake (2) Parking Brake: Hand operated 7.0 Wheelbas1620mm 8.0 Track1160mm. 1 setin 1*20 gp, 3 sets in 1*40hc.
Detailed product description: 1. Wheel loader. 2. CE Certification, ISO 9001. 3. Longevity. 4. Low cost of ownership. 5. Easy operation Wheel loader 1) CE or EPA; 2) Engine: Xinchai, Changchai; Weichai 3) Rated loading: from 1T to 5T 4) Bucket capacity: 0.4 Specifications of ZL08F Wheel Loader: 1.0 Engine Details (1) Model: Changcai L24 (2) Engine type: In-line arrangement, water-cooled, one-cycle diesel Engine (3) Rated Power: 17KW (23.12 H.P.) (4) Rated Speed: 2200 r/min (rpm) (5) Fuel Consumption ratio in standard working condition: 269g/kw.h 2.0 Steering System (1) Cycloid full hydraulic steering system: BZZ-80 (2) System Pressure: 10MPa (3) Speed (a) Forward shift (forward I): 7.19 (b) Forward shift (forward II): 3.35 (c) Reverse shift (Reverse I): 7.19 (d) Reverse shift (Reverse II): 3.35 3.0 Bucket (1) Bucket Capacity: 0.4 m3 (2) Bucket width: 1300mm (3) Bucket type: Heavy-duty bolt on teeth (4) Max. Breakout Force: 28KN (5) Rated Load: 800kg (6) Operating Weight: 2350kg 4.0 Overall Dimensions (1) Overall Length (Bucket on ground position): 4700mm (2) Overall Height (a) Ground to Cab Top: 2350mm (b) Ground to exhaust pipe: It is below from the top of cabin (3) Overall Width: 1600mm 5.0 Operating Specifications: (1) Drive Means: Four-wheel drive (2) Min Turning Radius: 4600mm (3) Driving System: mechanical (4) Dumping Reach at max height: 750mm (5) Min the ground distance: 240mm (6) Time of raise: 4sec. (7) Hydraulic cycle time: 9sec. 6.0 Brake System (1) Service Brake: Four Wheel Hydraulic spread-shoed brake (2) Parking Brake: Hand operated 7.0 Wheelbase2170mm 8.0 Track 1285mm. 1 set in1*20 gp, 3sets in 1*40hc.
Wheel loader. Container.
Size: 595 x 595, 600 x 600 , 610 x 1220 Thickness: 7.0 ; 7.5; 8.0; 8.5; 9.0; 12 . 6/8/10 pieces per carton with shrink wrap bag and importer trade mark printed the carton strip.
LuyiForge se ha convertido en el mayor productor de hierro forjado en China. Nuestros componentes de hierro forjado son ampliamente utilizados en puertas de hierro, rejas, escaleras de hierro, balcones de hierro, muebles de hierro forjado, y muchos otros productos de hierro forjado art. Luyi Forja ahora tiene cerca de 30.000 m2 de rea para la produccin y almacenamiento, y ms de 500 herreros cualificados. Ahora podemos suministrar alrededor de 5.000 diferentes dise;os ornamentales de hierro forjado, por lo que puede conseguir casi todos los modelos populares de nosotros.
We manufactures various drilling rigs (1000HP¡«3000HP), incl. AC variable frequency, DC motor, mechan-electric, and mechanical driven rigs. The Company has the capability of design, manufacture, and final assembly (commission) of complete set of rigs and provides our customers with comprehensive solutions & service of complete set of rigs to ensure them receive the highest quality oilfield products and services. * This kind of DC driven rig is available in four models. 1000HP ZJ40/2250DZ 1500HP ZJ50/3150DZ 2000HP ZJ70/4500DZ 3000HP ZJ90/6750DZ Notes : DZ-Drilling rig driven with D.C. motor; * This kind of AC variable frequency driven rig is available in four models. 1000HP ZJ40/2250DB 1500HP ZJ50/3150DB 2000HP ZJ70/4500DB 3000HP ZJ90/6750DB Notes : DB-Drilling rig driven with A.C. motor with frequency converter. Basic parameters of this kind of rig are in accordance with SY/T5609-1999 Type & Basic Parameters of Oil Drilling Rigs: * DC driven rig adopts international advanced AC-SCR-DC power system, realizing the stepless speed regulation for drawworks, rotary table and mud pump to obtain better drilling performance. * AC variable frequency rig uses VFD and digital control technology, simplifying drawworks construction and enhancing drilling performance. * Main components are manufactured in conformity with API Spec and applied API monogram on them.
This kind of rig is available in three models. 1000HP, 1500HP, 2000HP. The drilling rig is driven by diesel engines, hydraulic coupling & chain compound box or diesel engines, reducers & narrow V-belt, which provides smooth mechanical power to the drawworks. A number of hoisting speeds and rotary speeds are available. Main mechanical parts are in conformity with API Spec and applied API monogram on them.
This kind of rig is available in four models 1000HP, 1500HP,1500HP, 2000HP. Power: three-(or four)-diesel-engine (2000 or 3000 series) linkages, which are connected with couplers and reducer casings. * The drawworks and the mud pump are mechanically driven. The rotary table is independently driven by an AC/DC variable frequency motor. * Easy installation and better sealing as a result of taking an integral chain box or V-belt compound transmission unit. * The drawworks is equipped with the grooved drum and shifting a gear for it is carried out by air cylinders. The hydraulic disc brake is regarded as main brake and the eddy current brake as auxiliary brake. * The rotary table is driven independently by AC variable frequency motor and can accomplish stepless speed regulation with 0~210r/min. AC is supplied by an auxiliary generator set. * Main mechanical parts are manufactured in conformity with API Spec and applied API monogram on them.
There are seven models available F-1300,F-1600,3NB500C,3NB1000C,3NB1300C,3NB1600 ,LN1600H. F Series Mud Pumps: The power end: The housing is of welded steel-plate construction. It is stress-relieved after welding. The pinion shaft and the gear are herringbone gears with recess, which allow smooth operation with high efficiency and long life. The crankshaft is a one-piece steel casting. The power end is splash and pressure lubricated. The fluid end: The valve seat, the liner, the suction and the discharge flanges conform to API specifications
- UPVC Profile: EAST 2.2~2.7mm - Profile Color: White, Other Colors according to buyers requirements and designs - Steel Reinforcement: 1.5mm galvanized steel or longer than 1.5mm - Hardware: ROTO of Germany or High-quality domestic - Double Glass: Clear Glass, Tempered Glass, Low-E Glass all available - Rubber Strip: High-quality EPD . Carton.
1. Portable concrete mixer applications: Electric Mobile Mini Concrete Mixer is mainly used in the field of small-scale architecture and decoration for mixing mortar, and mixing chemicals and feed etc. 2. Portable concrete mixer specifications: Model: PCM-600 Drum Capacity : 170L(6Cu Ft) Discharging capacity: 85L Motor: 0.55kw gearbox direct drive Frame: Removable steel wheelbarrow style Drum RPM : 21 Paddles: 3 steel blades Drum: UV-Proof PE Wheel: Flat free rubber wheel 16"x4.00-8 Power Source: 115V/220V,60Hz/50Hz,Single phase NW/GW: 56KGS/60KGS Packing size: 82x74x69cm 20GP/40HQ: 72PCS/144PCS. 1pc/carton.
1. Portable concrete mixer applications: Electric mobile mini concrete mixer is mainly used in the field of small-scale architecture and decoration for mixing mortar, and mixing chemicals and feed etc. 2. Portable concrete mixer specifications: Model: PCM-350 Drum Capacity : 120L(3.5Cu Ft) Discharging capacity: 60L Motor: 0.55kw gearbox direct drive Frame: Removable steel wheelbarrow style Drum RPM : 21 Paddles: 2 steel blades Drum: UV-Proof PE Wheel: Flat free rubber wheel 14"x2.50-8 Power Source: 115V/220V,60Hz/50Hz,Single phase NW/GW: 46KGS/50KGS Packing size: 75x63x63cm 20GP/40HQ: 96PCS/192PCS. 1pc/carton.
Description: - UPVC Profile: EAST 2.2~2.7mm - Profile Color:White, Other Colors available as your request - Steel Reinforcement: ¡Ý 1.5mm galvanized steel - Hardware:ROTO of Germany or High-quality domestic - Double Glass: Clear Glass, Tempered Glass, Low-E Glass all available - Rubber Strip: High-quality EPDM.
