Product application 1) Increase the dispersion of carbon black in rubber, accelerate the dispersion of carbon black in rubber processing, and improve the technological properties of rubber mixtures such as extrusion, calendering and adhesion. 2) Improve the even dispersion of sulphur in the rubber and prevent rubber from burning. 3) Improving dispersion of white carbon black in rubber compound. 4) Reduce the viscosity of The mixture of rubber. 5) Improve hardness and wear resistance of vulcanizates. 6) This product is suitable for tire processing, such as: radial tire, inclined tire production, this product is also suitable for tape processing, rubber and plastic cable products.
Plasticizer A LTS-82A 86A is a mixture of high molecular weight aliphatic polymers containing unsaturated bonds and active agents. The product does not affect the physical properties of the rubber compound, and has the property of reducing the Mooney viscosity and shortening the mixing time, and the hardness of the finished product is not affected. Inorganic fillers such as carbon black and white carbon have high-performance dispersion, improve extrusion and injection properties of rubber compounds, smooth surface, and significantly reduce internal porosity. This product can reduce the heat generation of the rubber compound, reduce wear, improve tire life and reduce energy consumption.
Product performance: Good protection against ozone and flex fatigue aging. It also has good protection for general aging such as hot oxygen and harmful metals such as molybdenum and manganese. Can be used as a stabilizer for synthetic rubber.
Application description:Rubber adhesive RA produces adhesion through reaction with methylene acceptor. For example, it reacts with rubber binder RE and resorcinol formaldehyde resin GLR-20 to form thermosetting resin. The reaction will occur very quickly at vulcanization temperature. If the reaction occurs before vulcanization, the adhesion of the coordination system will be greatly reduced or even lost. Usually, the rubber, filler and methylene acceptor are prepared at high temperature, and then the rubber adhesive RA is added with accelerator and sulfur in the final refining stage. The recommended proportion is 2-5 rubber adhesive RA for each 100 rubber, and 2-5 GLR-20 resins. Packaging storage and transportation: 1. The rubber adhesive RA is wrapped in woven bags and lined with polyethylene plastic bags. The net weight is 25Kg per package. 2. Before transport and storage, check whether the product packaging is intact. During storage and transportation, the products should be stored in dry, clean and cool warehouses in order to prevent dampness and heat deterioration. 3. The effective storage period is one year. For information about other types of rubber adhesive,please send message to Email.
atters needing attentionThis product is a polluting antioxidant. It is not suitable for white or bright-colored products because of its pollution to light-colored products by migration or contact. Packaging and storage:packaging can be done according to customer requirements. BLE200Kg/bucket BLE-Cã??BLE-Wã??BLE-75:Paper plastic composite bag, net weight 25kg. Store in a cool, ventilated and dry place. For more information about other types of rubber antioxidant,please send message to Email.
Characteristics and Usesï¼? Applicable to various lubricating oils, re-processed gasoline, paraffin and other mineral oils, as well as to polyethylene, polystyrene, polypropylene, ABS resin, polyester, cellulose resin and foamed plastic (particularly to white or light-colored product), food-grade plastics, natural rubber, synthetic rubber, animal and plant grease etc.
DPG (D) GRANULE AND POWDER CHINA , Technical Name: Diphenyl guanidine Appearance: White or grayish white powder or granule, Melting point:144.0 Generally used for natural and synthetic rubbers. Mainly used in manufacture of tires, slab rubber, rubber shoes and other technical rubber products.
IPPD (4010NA) SOLID CHINA, Technical Name: N-Isopropyl-N'-phenyl-1,4-phenylenediamine Purity:95%, Used in all kinds of tire and rubber products, solid tires, belts, hoses, cables, automotive mounts, bushings and general mechanical products that are exposed to continuous and intermittent dynamic operating conditions and require protection from ozonation.
TBBS (NS) GRANULE AND POWDER CHINA Technical Name: N-Tertiarybutyl-2-benzothiazole sulfenamide CAS NO.: 95-31-8 TECHNICAL SPECIFICATIONS Appearance White or light yellowish powder or granule Initial melting point, min 104.0 Heating loss, % max 0.40 Ash content, % max 0.30 (For powder) Residue (150 um), % max 0.10 (For granule) granule rigidity, N max 1.0 Insoluble In methanol, %, max 1.0 Free amine, %, max 0.50 Purity, %, min 96.0 Properties: It is white or light yellowish powder. Density:1.26- 1.32g/cm3.Soluble in benzene, chloroform, carbon disulfide, acetone, methanol, ethanol, but hard in gasoline, insoluble in water, dilute acid and dilute alkali. Application: TBBS is a Vulcanization accelerator with delayed action, short cure time, has high anti-scorching quality, processing safety. Widely used in all sorts of rubber products and tires, especially the meridian tires. The product is an excellent delayed accelerator with more delayed action and great curing rate and other advantages. Package: In knitted bag lined with plastic bag or Kraft paper bag.25kgs/bag or upon request.
Non-polluting antioxidant TH1520 macromolecule material antioxidant Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol CAS No. 110553-27-0 Molecular formula: C25H44OS2 Molecular weight: 424.7 Physical property: Melting point: 20 C Appearance: White crystals or colorless to yellowish liquids Specific gravity: 0.975-0.979 (20 C) Viscosity: 80-90 mPa.s (20 C) Technical Indicators: Content (>98%) Transmittance: 425 nm 95% Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc. Purpose: This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance. Packing, storage, transportation and precautions: Galvanized drum packing, net weight 200 kg; The product should be stored in a clean and dry place to prevent rain. When handling this product, strong rubbing should be avoided.
CPE/CR Rubber Vulcanizer H631 Colour: Light yellow powder Cross-linking Agent ACTORH-631 H631 can be used as a thiadiazole vulcanization system for vulcanization crosslinking of chlorinated polyethylene rubber (CPE/CM) and chloroprene rubber (CR). As a CM/CR high-efficiency vulcanizing agent, it can produce heat-resistant, ozone-ageing, flame-retardant and excellent physical properties. It is widely used in rubber products such as cables, hoses, tapes and so on. H631 is obtained by complex condensation coupling reaction of thiadiazole derivatives and other macromolecule amides. Its appearance is a pale yellow powder. The product can be used in various vulcanization processes of CPE/CR, such as moulding, continuous vulcanization, pot-type, microwave-type, etc. H631 can effectively vulcanize chlorinated polyethylene rubber (CM), chloroprene rubber (CR) and obtain excellent vulcanizates. Characteristic 1. H631 is suitable for low pressure die-less vulcanization (conventional peroxide system requires higher vulcanization temperature and pressure), with good processing safety and longer scorching time. 2. H631 can replace high-priced plasticizers such as DOP with cheap plasticizers such as aromatic oils. 3. H631 is an effective co-vulcanizing crosslinking agent for rubber such as CPE/EPDM CPE/NR CPE/CR.
CAS; 51988-14-8 Usage: CPE, CM Rubber Vulcanizing Agent Vulcanizing agent TDDS Appearance The finished product is light yellow powder. Packing: 25kg/cardboard drum Composition of thiadiazole thiadiazole ester derivatives Content (assy)%>96 Detail% > 99 (pass rate of 320 meshes) Melting Point (m, p)% 165-168 C Moisture (w, c) is less than 0.30 Ash (%) less than 0.30 DMF density 1.46 Physical properties: insoluble in methanol, ethanol, water, slightly soluble in acetone Foreign similar product brands: Rhenogran TDD in Germany; ACTOR-ECHO.A in USA Shelf life: 12 months sealed at room temperature Product description: TDDS is a vulcanizing crosslinker specially designed for halogenated synthetic rubber such as chlorinated polyethylene rubber (CM) and chlorohydrin rubber (ECO) chloroprene rubber (CR) chlorosulfonated polyethylene rubber (CSR). TDDS is a derivative of 2,5-dimercapto-1,3,4-thiadiazole ester. TDDS is a derivative of thiadiazole ester. It can be used as a new vulcanization crosslinker for halogenated polymers such as chlorinated polyethylene rubber (CPE), polyvinyl chloride (PVC) and chlorohydrin rubber (ECO), chlorosulfonated polyethylene rubber (CSM), chlorinated rubber, chlorobutadiene rubber (EVA). TDDS is especially suitable for vulcanization and crosslinking of CPE. It is a highly effective and high performance vulcanizing agent for chlorinated polyethylene with NC or BF. Advantages of TDD vulcanization system: 1. TDDS vulcanization system is suitable for any vulcanization methods, such as moulding, continuous vulcanization, tank type, microwave type, etc. The vulcanization process will not be oxidized by air. It is suitable for Moldless vulcanization in vulcanization tank with low vulcanization temperature. Also suitable for injection moulding can be vulcanized in vulcanizer. 2. The curing speed is fast and the positive curing time is short. 3. Safe operation, no pollution in the production process, no irritating odor, no frost, no scorch. 4. The physical properties of vulcanizates are as good as those of peroxide systems, and they are ageing-resistant. Excellent heat resistance, small compression permanent deformation, especially good tear resistance. 5. The product has good appearance, no frost spraying, no burning and no irritating odor. Product applications: 1. The recommended dosage is 2.0-2.5 TDDS and 1.5 BF (NC) for cable sheath and rubber products such as inner and outer rubber and conveyor belts. 2. A small amount of insoluble sulfur can be used in braided rubber pipes with copper-plated steel wires to improve their vulcanization and adhesion to steel wires. 3. Suitable for high temperature and rapid vulcanization, and also for steam tank type vulcanization: 4 kg/cm2 steam pressure (151 C) vulcanization tank. Suggestion of vulcanization time is 40 minutes.
Details of silicone rubber vulcanizer DPDH Chinese Name: 2,5-dimethyl-2,5-bis (tertbutyl peroxy) hexane; 2,5-dimethyl-2,5-bis (peroxide tertbutyl peroxide) hexane; 2,5-dimethyl-2,5-bisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbis (bis "2,5" vulcanizing agent; bis-2,5-hexane; 2,5-didimethyl-2,5-bis-2,5-bis (peroxytertbutyl) hexane (peroxy tertbutyl) hexane; 2,5-didididimethyl-2,5-dididididimethyl-2,5-bisbisbisbis (tertbutbutyl peroxy) hexahexa5-dimethyl-2,5 bis (tert) Butyl peroxide) hexane. English Name: 2,5-BIS (T-BUTYLPEROXY) - 2,5-DIMETHYLHEXANE; 2,5-BIS (TERT-BUTYLPEROXY) - 2,5-DIMETYLPEROXY) - 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DIMETHYL-2,5-BIS (TERT-BUTYLPEREROXY) HEXANE; 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DI DIMETHYL-2,5-DI (T-BUTYLPEREROXY-BUTYL-DI DI DI (T-BUTYL-BUTYL-PEROXY) HEXANE; - BUTYLPEROXY) HEXANE Di-tert-butyl 1,1,4,4-tetramethyltetramethylene diperoxide; luperox; LUPEROX 101XL; Trigonox 101; VAROX DBPH; VAROX DBPH-50 Molecular formula: C16H34O4 Molecular weight: 290.4 CAS No. 78-63-7 Product Profile: Bis-pentadecyl sulfide can be used as crosslinking agent for natural or synthetic rubber, as well as for thermoplastic polyolefins. Compared with 3M and di-tert-base silicone rubber products, the silicone rubber products produced have higher operation safety, better heat resistance and physical properties. It has high content, low consumption and low cost. It can be used as crosslinking of natural or synthetic rubber as well as thermoplastic polyolefins. 1. Rubber with bis-pentadecane vulcanizer has excellent scorching safety. 2. Safe processing temperature: 135 C (rheometer tS2 > 20 minutes) 3. Typical crosslinking temperature: 175 C (rheometer T90 about 12 minutes) Use of bis-pentadecyl sulfide: Bis-pentadecane vulcanizer is a bifunctional peroxide, which can be used as crosslinking of natural or synthetic rubber, as well as thermoplastic polyolefins. Product Specification of Bi-pentadecane Sulfide: Appearance: White paste with high viscosity: 50 PT-Co Max Content: 92.0% min ROS: 10.14% min Organic peroxides are unstable to heat and can produce exothermic self-accelerated decomposition. Self-accelerated decomposition temperature SADT is the lowest temperature at which peroxide may produce self-accelerated decomposition in packaging for transportation. The determination of SADT is based on the "heat accumulation storage test". Bis-pentadecane vulcanizer packaging: standard packaging is 25kg/plastic bucket
Non-polluting antioxidant TH1520 macromolecule material antioxidant Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol CAS No. 110553-27-0 Molecular formula: C25H44OS2 Molecular weight: 424.7 Physical property: Melting point: 20 C Appearance: White crystals or colorless to yellowish liquids Specific gravity: 0.975-0.979 (20 C) Viscosity: 80-90 mPa.s (20 C) Technical Indicators: Content (>98%) Transmittance: 425 nm 95% Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc. Purpose: This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance. Packing, storage, transportation and precautions: Galvanized drum packing, net weight 200 kg; The product should be stored in a clean and dry place to prevent rain. When handling this product, strong rubbing should be avoided.
ACTOR-512, a vulcanizing agent for special rubber containing chlorine Cas: 72676-55-2 Composition: Thiadiazole derivatives Appearance: Yellow powder Indicator Detection Method Fineness 200 Pass Rate (> 99%) Screening and Washing Elemental Analysis of 17.5-19.7% Nitrogen Content Elemental Analysis of Sulfur 63.0-67.0% Testing Indicators: Based on Enterprise Standards Ash content 0.4% Density 25 degrees C 2.09 Mg/m3 Drying weightlessness 2 hrs. at 60-65 degrees C 0.40% Melting point 153-160 degrees C Soluble insoluble in water and benzene Purpose: Actor-512 is a polymer obtained by oxidation of dimercaptothiadiazole, in which the content of sulfur element reaches 66%. Hybrid compounds have conjugated atoms, so they can be used for many special purposes. 512 can also be used as an extrusion and anti-wear additive in the production of lubricating grease, which endows the grease with high extreme pressure and anti-wear properties, and has a series of anti-oxidation effects with the role of metal deactivation, effectively preventing the pollution of non-ferrous metals to oil products. Packing: 25kg/drum Shelf life: sealed at room temperature for one year
Chemical Name : N,N-m-phenylene bismaleimide Molecular Formula: C14H8N2O4 Molecular Weight: 268.23 CAS NO. :3006-93-7 Specifications Item powder Oiled Powder Appearance Yellow or brown powder Initial Melting Point 198.0 198.0 Loss on Drying% 0.50 0.50 Ash% 0.50 0.50 Residue on 150¼m Sieve,% 0.10 0.10 Oil content,% ---- 1.0~2.0 Strength ---- ---- Physical property Density at 20â??(kg/m)3 950 950 Properties: Yellow or brown powder, soluble in THF and 1.44 share of hot acetone, insoluble in petroleum ether, chloroform,benzene and water, melting point 195 C or more. Applications: PDM as a function of rubber chemicals in rubber processing for the curing agent can also help the system can be used for peroxide curing agent, also can be used as anti-scorching agent and tackifier, both for general-purpose rubber, also applies to special rubber and rubber and use system. In natural rubber, and sulfur coordination to prevent reversion to improve the heat resistance, reduce heat, anti-aging, improve adhesion of the rubber and tire cord and the vulcanized rubber modulus. Shoulder for load tire rubber, rubber buffer layer, solve the problem of bias truck tire shoulder separation can also be used for large-size thick natural rubber products and various rubber sundries. PDM can be used as auxiliary curing agent, can significantly improve the correlation performance, increase heat resistance, suitable for high temperature curing system, reducing the compression is very obvious, but also reduce the amount of peroxide, preventing the processing of rubber in the focus burning, improve tire cord and rubber and metal bond strength. PDM is a non-sulfur vulcanizing agent for rubber cable, it can replace thiazoles, thiuram and all sulfur vulcanizing agent, solution of copper wire and copper electrical generation due to exposure to sulfur vulcanizing agent black copper sulfide contamination problems. As scorch agent for the 0.5-1.0 copies, as curing agent for the 2-3, to improve the compressive deformation of 1.5 copies, improve the adhesive strength of 0.5-5.0 copies. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: Should be stored in a cool, dry, well ventilated place, packaged products should avoid direct sunlight. Notes: This product is oil based on user needs, treatment or granulation.
Product Description RUBBER ADHESIVE RA-65 (HMMM) CAS NO: 9011-5-6 Brief Introduction: Adhesive RA-65 is composed of Hexamethoxymethylmelamine and an inert Carrier. In conjunction with methylene receptor, it can effectively promote the adhesion between rubber and steel reinforcing material. Technical Specification: Appearance: White powder Ash Content (850oC), % : 29~35 Moisture content (Boiling Evaporation Method) â?¤4.5 Sieve Residue (325 mesh wet-method), % â?¤0.3 Free formaldehyde, % â?¤0.1 Application: This product is used in binding Rubber with steel wire, Nylon, Rayon, fiberglass, etc. In using this product, simply mix it directly into Rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with Rubber Adhesive RS, RH, RE, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. packing; 25kg/bag
Chemical Name : N - ( 1 ,3 - dimethylbutyl ) - N' - phenyl - p â?? phenylenediamine Specification: Item Qualitied Grade Appearance Dark purple pastlles.Dark purple pastilles Melting Point â?¥â?? 45.0 Heating loss(60-70â??)â?¤% 0.30 Ash â?¤% 0.15 Assay(GC)â?¥% 96.0 Freezing pointâ?¥â?? 45.5 Properties: The cinereus solid, the relative density 0.986-1.00, dissolve in the benzene, the acetone, the ethanoic acid, the ethyl acetate, the dichloroethane alkane and the toluene, does not dissolve in the water. Application : Mainly used in manufacture of tires , rubber shoes and other rubber products. Packaging: 20/25kg kraft paper bag. Storage: It should be stored in cool,well ventilated & dry places and away from fire.It should avoid drench and solarization while transportation.
Chemical Name: Zine salt of 2-mercaptobenzimidazole Specification: Item Powder Oiled powder Appearance White powder Initial M.P. �¿C â?¥ 240.0 240.0 Loss on drying % â?¤ 0.50 0.50 Zinc content % 18.0-20.0 18.0-20.0 Residues on 150�¼m sieve, % â?¤ 0.50 0.50 Additive, % -- 1.0-2.0 Properties: White powder. No smell but taste bitter. Soluble in acetone, alcohol, insoluble in benzene gasoline and water. Application: Applications A non-staining secondary antioxidant for NR, CR, SBR, NBR, EPR, etc. Especially effective against heat oxidation in combination with amine. Could be used alone or combined with the anti-degradants, such as DNR or AP. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name: 2,2'-methylenebis(4-methyl-6-tertbutylphenol) Specification: Item Index Appearance White powder Purity,% â?¥ 99.0 Initial Melting pointoCâ?¥ 125.0 Heating loss, % â?¤ 0.50 Ash % â?¤ 0.10 Residues on 150�¼m sieve, % â?¤ 0.20 Properties: White, grey-white to slightly yellow powder, low volatility, steam pressure 2mm/Hg columniation (160oC). In rubber, solubility exceeds2%, in organic impregnant (such as carbinol, Alcohol, Benzene, Acetone, Ethyl acetate, Chloroform) it can well dissolve. Because of the hindered phenolic structure, its chemical character is not lively. In storage it can keep stable conditions. It will appear slightly red after long storage, but have no effect on antioxidant. Application: It can be used as antioxidant in natural rubber, latex, synthetic latex, as well as kinds of plastic products. Also in oil products and fattiness food, it can act suitable antioxidant. This product has low toxicity and volatility, no pollution coloration to the applied products. It's a widely applied hindered phenolic antioxidant. Packaging: 20kg plastic woven bag, paper with plastic film bag.
