Vulcanizing Agent Pdm

Mainly supply vulcanizing agent DTDM TCY PDM DTDC. 25kgs/bag

CAS; 51988-14-8 Usage: CPE, CM Rubber Vulcanizing Agent Vulcanizing agent TDDS Appearance The finished product is light yellow powder. Packing: 25kg/cardboard drum Composition of thiadiazole thiadiazole ester derivatives Content (assy)%>96 Detail% > 99 (pass rate of 320 meshes) Melting Point (m, p)% 165-168 C Moisture (w, c) is less than 0.30 Ash (%) less than 0.30 DMF density 1.46 Physical properties: insoluble in methanol, ethanol, water, slightly soluble in acetone Foreign similar product brands: Rhenogran TDD in Germany; ACTOR-ECHO.A in USA Shelf life: 12 months sealed at room temperature Product description: TDDS is a vulcanizing crosslinker specially designed for halogenated synthetic rubber such as chlorinated polyethylene rubber (CM) and chlorohydrin rubber (ECO) chloroprene rubber (CR) chlorosulfonated polyethylene rubber (CSR). TDDS is a derivative of 2,5-dimercapto-1,3,4-thiadiazole ester. TDDS is a derivative of thiadiazole ester. It can be used as a new vulcanization crosslinker for halogenated polymers such as chlorinated polyethylene rubber (CPE), polyvinyl chloride (PVC) and chlorohydrin rubber (ECO), chlorosulfonated polyethylene rubber (CSM), chlorinated rubber, chlorobutadiene rubber (EVA). TDDS is especially suitable for vulcanization and crosslinking of CPE. It is a highly effective and high performance vulcanizing agent for chlorinated polyethylene with NC or BF. Advantages of TDD vulcanization system: 1. TDDS vulcanization system is suitable for any vulcanization methods, such as moulding, continuous vulcanization, tank type, microwave type, etc. The vulcanization process will not be oxidized by air. It is suitable for Moldless vulcanization in vulcanization tank with low vulcanization temperature. Also suitable for injection moulding can be vulcanized in vulcanizer. 2. The curing speed is fast and the positive curing time is short. 3. Safe operation, no pollution in the production process, no irritating odor, no frost, no scorch. 4. The physical properties of vulcanizates are as good as those of peroxide systems, and they are ageing-resistant. Excellent heat resistance, small compression permanent deformation, especially good tear resistance. 5. The product has good appearance, no frost spraying, no burning and no irritating odor. Product applications: 1. The recommended dosage is 2.0-2.5 TDDS and 1.5 BF (NC) for cable sheath and rubber products such as inner and outer rubber and conveyor belts. 2. A small amount of insoluble sulfur can be used in braided rubber pipes with copper-plated steel wires to improve their vulcanization and adhesion to steel wires. 3. Suitable for high temperature and rapid vulcanization, and also for steam tank type vulcanization: 4 kg/cm2 steam pressure (151 C) vulcanization tank. Suggestion of vulcanization time is 40 minutes.

Product name: predispersed rubber vulcanizing agent s - 80 Producing area: liaoning panjin Chemical name: sulfur bber products which need to inherit the dynamic stress, various kinds of soft rubber, not sulfur defective light color rubber. Packaging and shipping: 25 kg, polyethylene bag lined with carton. Should be stored in a cool, ventilated and away from the fire place.

Description OF-7 is a polymeric alkyl phenol disulfide, contains unique sulfur donors in the molecular structure, can vulcanize rubber in heated state, � typically used as nitrosamine-free environment-friendly sulfur donating body in the rubber compound formulations, can give excellent mechanical properties, heat aging resistance, excellent dynamic fatigue properties and good operational safety performance. Application OF-7� contains unique sulfur donors, can� vulcanize rubber in heated state, giving non-blooming, high tensile strength, excellent heat resistance and dynamic fatigue properties, used� as� sulfur donor type vulcanizing agent� for NR/SR. For the co-vulcanization� of different polar rubber, such as NR, CIIR, IIR and EPDM, it provides excellent performance. Can be used in tires, gaskets, belts, automotive hose, damping products.� Because containing� alkylphenol� groups,� it has� also excellent tackifying and antioxidant effects. Not producing� nitrosamines toxic gas� during vulcanization, it is an environmentally friendly additive. Reference dosage 0.5-5 phr. Package and Storage In paper/plastic combined sack with inner film bag, 25 kg net each. Store indoor, drying and ventilating, shelf-life 18 months.

Mainly used in tire, rubber product Rubber adhesive ra 65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white powder and gives off methanal upon heating. It is hypo-methanal donator among double functioning adhesive system for rubber Specification Appearance: white powder Ash content (850 degree), %: 29-35 Moisture content (boiling evaporation method) & 4.5 Sieve residue (325 mesh wet-method), % & 0.3 Free formaldehyde, % & 0.1 25kg/bag

DMDBH curing agent Apperance: past Assay: 45% CAS: 78-63-7 Molecular weight :290.4 Active oxygen content peroxide :11.02% Cas no. :78-63-7; 68083-18-1 Einecs/wlincs no. :201-128-1 Tsca status : listed on inventory DMDBH is a bifunctional peroxide which is used for the crosslinking of silicone rubber Appearance : Transparent evenly paste Assay : 43.0-45.0% Density, 20ípC : 0.870 g/cm3 Flashpoint : 56ípC Freezing point : 6ípC Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To minimize the loss of quality, we recommend a maximum storage temperature (TS max.) for each organic peroxide product. For DMDBH TS max.= 30 ípC When stored under the recommended storage conditions, DMDBH will remain within the specifications for peroxide of at least 6 months after delivery. Thermal stability Organic peroxide are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test. Organic peroxide are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Acumulation Storage Test. For DMDBH SADT: 80ípC Packing and For DMDBH, the standard packaging is 18kg/drum. Transport Safety and handling: Keep containers tightly closed. Store and handle DMDBH in a dry well-ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room. Void contact with reducing agent (e.g.amines), acids, alkalines and heavy mental compounds (e.g. accelerators, driers and metal soaps.) Applications DMDBH is used for the crosslinking of silicone rubber. Rubber compounds contain DMDBH have excellent scorch safety. Safe processing temperature: 135ípC (rheometer ts2> 20 minutes) Typical crosslink temperature: 175ípC (rheometer t90 about 12 minutes) 18kg/pail

Supplier: Crosslinking agent, rubber additive (actor-TDDS, accel-BF, actor-JCSS, ACCEL-808, actor-512), pharmaceutical intermediates (DMTD), CPE, actor, 512A, 512B, vulcanizing agent, cross linking agent, CM rubber

Application: Insoluble sulphur ot20 had been widely used in natural rubber and a variety of synthetic rubber. They are made with tire and rubber products such as: rubber belt, rubber pipe and sealants etc. They are specially used in radial truck tire making. Technical specification Appearance: yellow powder (non-flying) Sulphur content (%): 79.0-81.0 Insoluble sulphur content (% min. ): 90.00 High temp. Stability (% min. ) (105 degree*15min): 80 Oil content (%): 19.0-21.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60 degree *2h), % max.: 0.40 Ash, % max.: 0.10 Fineness(100mesh), % min.: 99.8 25kg/bag

Rubber Vulcanizing Agent (Insoluble Sulfur)OT20 (IS-HS-7020 highly thermal stability) Technical Specification Appearance: Yellow Powder (Non-flying) Sulphur Content (%): 80.0¦1.0 Insoluble Sulphur Content (% min.): 72 High temp. Stability (% min.) (105℃*15min): 75 Oil Content (%): 20.0¦1.0 Acid Content (As H2SO4), % max.: 0.05 Heating Loss (60℃*2h), % max.: 0.40 Ash, % max.: 0.15 Fineness(100mesh), % min.: 99.8. Application: Insoluble sulphur OT20 (IS-HS-7020) had been widely used in natural rubber and a variety of synthetic rubber. They are made with Tire and rubber products such as: Rubber Belt, Rubber Pipe and Sealants etc. They are specially used in Radial Truck Tire making. Product Standard: (Enterprise standard) Q/320206GAD03-2008. OT20 Introduction Rubber Vulcanizing Agent OT20. Insoluble Sulfur can improve the resistance to both fatigue and ageing of all kinds of rubber products. It is used as the best vulcanizing agent for rubber. And it is widely used in the manufacture of the rubber chemistry such as tire, rubber pipe, shoes, cable and wire, insulating materials, latex, and all kinds of automobile rubber parts, especially for radial tires. Advantages of Insoluble Sulfur: The rubber no need spout frost during storage time. The Insoluble Sulfur is able to keep the unanimous features of the rubber material, and prevent the pollution to rubber product and the models With Insoluble Sulfur, there will be no transferring phenomenon between rubber layers that protects the moulding stickiness of the surfaces Reduce coking while mix smelting and storage Shorten vulcanization time, reduce the dose of sulfur and improve the property of anti-aging of the product . Packing: Packing and storage: IS8510 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40f¦. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year.