Flavorless crosslinking agent BIPB peroxide series crosslinking agent Products commonly known as: BIPB, BIBP, odourless DCP, cross-linking agent BIPB, curing agent BIPB, BIPB, bridge agent BIPB, Vul-Cup 40KE, Luperox 802, Peroximon F 40MG, Perkadox 14SFI, Perperperyl PT, NORPEREROX BIPB-40C, Liandox VC-40C, Aceox BIBP 40C, Aceox BIBP 40C, OXANBIB, OXANBIB, ECILINK-40C BIK-40C, BIK BIS-40C, PBDP, PBMBDP, CCRIRIS 4588, EICSNECS246-246, Luperox-248-248, Luperperox-478-478, LuSP, LINKWELL BIPB Chemical name: di-tert-butyl peroxide diisopropylbenzene Molecular formula: C6H4 [C(CH3)2OOC(CH3)3]2 Molecular weight: 338Cas N0:025155-25-3 or 2212-81-9 Nature: It is insoluble in water and partly soluble in organic solvents such as ethanol, ether, benzene and carbon tetrachloride. The theoretical active oxygen content is 9.45%, the decomposition temperature is 182 C (half-life 1 minute), 118 - 120 C (half-life 10 hours). Purpose: This product can be used as crosslinking agent for chlorinated polyethylene, ethylene propylene terpolymer, ethylene vinyl acetate copolymer, silicone rubber, nitrile butadiene rubber, fluorine rubber and other plastics and rubber. Under the same crosslinking effect, the dosage of DCP is about 2/3, and the irritant odor in the operation process and the finished product is small. Packaging, storage and transportation: This product is packed in PE plastic bags with a net weight of 5 kilograms per bag and in cartons with a net weight of 20 kilograms per box. Storage temperature is normal, the product is not easy to deteriorate. Exposure and severe vibration should be avoided during transportation. Avoid heating, forbid mixing with strong acid and reducing agent. Quality indicators: Melting Point Temperature of Carrier with Appearance Content% of Series Products BIPB 96 Crystalline Powder 96 No 40-50 BIPB 90 White Powder 90 CaCO 3/ BIPB 40 White Powder 40 CaCO 3+Silica/
Special Rubber Vulcanizing Agent ACTOR-MTT CAS: 1908-87-8 ACTOR-MTT (3-methyl-2-Thiazolidinethion) is a thiazole carbazole compound, which contains active sulfur atoms and can cross-link halogen-containing polymers. It is especially suitable for vulcanization cross-linking of chlorinated butyl rubber, chloroprene rubber and chlorinated polyethylene rubber. Date item (lot, No) 0028 (Date production) 20110528 Appearance / appearance of white crystal White Powder Assy (HPLC) Content%>80 Dissolves Dissolves hot water Soluble in hot water M, P (capillary pipe) Melting point 55 C-65 C Water content (80 C, 12 hr dry weight loss) Moisture% less than 0.40 Ash content (950 C, 2hr) Ash% less than 0.40 Product uses: 1. MTT can be used as an efficient accelerator for chloroprene rubber. Compared with ETU, MTT maintained good physical properties and aging resistance of chloroprene vulcanized by ETU. 2. Chlorinated butyl rubber and natural rubber can be vulcanized by MTT, but the amount of natural rubber should not exceed 20%, and a higher amount of accelerator and a lower amount of magnesium oxide should be added. 3. Chlorinated butyl rubber and chloroprene rubber can be vulcanized effectively by MTT, so it is very suitable to use MTT to vulcanize them together. 4. The co-vulcanization of chlorinated butyl rubber (CBR) and natural rubber (NR) compounds is of particular significance to the tire industry. Good co-vulcanization bonding is required between the lining and matrix of CBR. Advantage: 1. Compared with sulfur curing system, MTT can obtain excellent physical properties, lower compression set and heat generation, and excellent hot air aging properties in chlorobutyl rubber. 2. The hot air aging property of rubber products vulcanized by MTT is also better than that of resin vulcanization system. The product has a low melting point and is easy to disperse. It can be mixed efficiently even in an open smelter. 3. The scorching time and vulcanization time of MTT in chlorinated butyl rubber can be delayed by MBTS or CTP or accelerated by TMTD or ZDMC. It is not appropriate to use clay alone, but it can be used with carbon black. Silica is very easy to burn, whether it is used with carbon black or with carbon black. 4. In the blend of chlorinated butyl rubber and natural rubber, MTT vulcanization can be used if the content of natural rubber is not more than 20%. When blended with chloroprene rubber, it shows excellent vulcanization characteristics and maintains the unique advantages of MTT vulcanization system. The chlorinated butyl rubber compound containing MTT can be co-vulcanized with natural rubber, and co-vulcanization improves the adhesion of chlorinated butyl rubber/natural rubber blends. Packaging: 25KG/drum Shelf life: sealed at room temperature for 12 months
Non-polluting antioxidant TH1520 macromolecule material antioxidant Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol CAS No. 110553-27-0 Molecular formula: C25H44OS2 Molecular weight: 424.7 Physical property: Melting point: 20 C Appearance: White crystals or colorless to yellowish liquids Specific gravity: 0.975-0.979 (20 C) Viscosity: 80-90 mPa.s (20 C) Technical Indicators: Content (>98%) Transmittance: 425 nm 95% Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc. Purpose: This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance. Packing, storage, transportation and precautions: Galvanized drum packing, net weight 200 kg; The product should be stored in a clean and dry place to prevent rain. When handling this product, strong rubbing should be avoided.
Vulcanizing agent TMT Acrylate vulcanizing agent for special rubber Product aliases: vulcanizing agent TMT; thiocyanate; trimercapto-triazine-trithiocyanate, triazine-trimercaptan, 1.3.5-triazine-2.4.6-trimercaptan, 2.4.6-triazine-thiocyanate, Trithiocyanuric acid English name: Trithiocyanuric acid; 1,3,5-Triazine-2,4,6-trithiol; Molecular formula: C3H3N3S3 Molecular weight 177.26 CAS: 638-16-4 Foreign Brand Vulcanizing Agent F Molecular formula C3H3N3S3 Molecular Weight 177.3 Specifications of Technical Indicators Item Indicator Specifications Appearance yellow amorphous powder Content% TMT 99 Initial melting point (> 320.0) Heat Loss,%,
Details of silicone rubber vulcanizer DPDH Chinese Name: 2,5-dimethyl-2,5-bis (tertbutyl peroxy) hexane; 2,5-dimethyl-2,5-bis (peroxide tertbutyl peroxide) hexane; 2,5-dimethyl-2,5-bisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbis (bis "2,5" vulcanizing agent; bis-2,5-hexane; 2,5-didimethyl-2,5-bis-2,5-bis (peroxytertbutyl) hexane (peroxy tertbutyl) hexane; 2,5-didididimethyl-2,5-dididididimethyl-2,5-bisbisbisbis (tertbutbutyl peroxy) hexahexa5-dimethyl-2,5 bis (tert) Butyl peroxide) hexane. English Name: 2,5-BIS (T-BUTYLPEROXY) - 2,5-DIMETHYLHEXANE; 2,5-BIS (TERT-BUTYLPEROXY) - 2,5-DIMETYLPEROXY) - 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DIMETHYL-2,5-BIS (TERT-BUTYLPEREROXY) HEXANE; 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DI DIMETHYL-2,5-DI (T-BUTYLPEREROXY-BUTYL-DI DI DI (T-BUTYL-BUTYL-PEROXY) HEXANE; - BUTYLPEROXY) HEXANE Di-tert-butyl 1,1,4,4-tetramethyltetramethylene diperoxide; luperox; LUPEROX 101XL; Trigonox 101; VAROX DBPH; VAROX DBPH-50 Molecular formula: C16H34O4 Molecular weight: 290.4 CAS No. 78-63-7 Product Profile: Bis-pentadecyl sulfide can be used as crosslinking agent for natural or synthetic rubber, as well as for thermoplastic polyolefins. Compared with 3M and di-tert-base silicone rubber products, the silicone rubber products produced have higher operation safety, better heat resistance and physical properties. It has high content, low consumption and low cost. It can be used as crosslinking of natural or synthetic rubber as well as thermoplastic polyolefins. 1. Rubber with bis-pentadecane vulcanizer has excellent scorching safety. 2. Safe processing temperature: 135 C (rheometer tS2 > 20 minutes) 3. Typical crosslinking temperature: 175 C (rheometer T90 about 12 minutes) Use of bis-pentadecyl sulfide: Bis-pentadecane vulcanizer is a bifunctional peroxide, which can be used as crosslinking of natural or synthetic rubber, as well as thermoplastic polyolefins. Product Specification of Bi-pentadecane Sulfide: Appearance: White paste with high viscosity: 50 PT-Co Max Content: 92.0% min ROS: 10.14% min Organic peroxides are unstable to heat and can produce exothermic self-accelerated decomposition. Self-accelerated decomposition temperature SADT is the lowest temperature at which peroxide may produce self-accelerated decomposition in packaging for transportation. The determination of SADT is based on the "heat accumulation storage test". Bis-pentadecane vulcanizer packaging: standard packaging is 25kg/plastic bucket
lensitizing crosslinker TMPTA;; Model TMPTA Brand Hengnuo Properties of Type Crosslinking Auxiliaries Effective Material Content 98 (%) Product Specification Level 1 Mainly Used as Crosslinking Auxiliaries for Rubber and Plastics CAS 15625-89-5 Scientific name: trimethylolpropane triacrylate Chemical formula: (CH2 = CHCOOCH2) 3CCH2CH3 molecular weight: 296.4 Physical properties: Low odor colorless or yellowish transparent liquid, almost insoluble in water, soluble in general solvents. Product features: with low viscosity, high boiling point, hill activity, low volatility, high curing speed and other characteristics. It is soluble in organic solvents such as low-carbon alcohols and aromatic hydrocarbons, but insoluble in water. Typical physicochemical properties: Appearance: 94.0 Solid Content (%): > 98.0 Methanol test (1:10): clear hyaluronic acid value (mgKOH/g):
Thermosensitive crosslinker TMPTMA INCI Name: Trimethylolpropane Trimethacrylate English Name: TMPTMA; 1,1,1,1-TRIMETHYLOMETHYLOLOLOLPROPANE; TRIMETHAHACRYLATETE; 2,2-BIS (METHACRYLOXYMETHYL) BUTYL METHACRYLATE; 2,2-ylobis (methyloxymethyl) butyl methacrylate; 2-ETHYL-1,3-DIMETHACRYLOXYLOXYLOXYLOXY-2- (METHACRYLOMETHAYMETHACRYMETHYHYLOLOLOLOLOXHYL) PROPANE; 2-ETHYL-2-2-2-ETHYHYMETHYLOLOLOLOXMETYMETYYYMETMETHYLOLOLOLOXYMETYMETMETHOHOHODIDIDIDIHACRYLATE CAS No. 3290-92-4 EINECS No. 221-950-4 Molecular formula: C18H26O6 Molecular weight: 338 Appearance and Properties: This product is a low viscosity, low volatile monomer liquid, providing rapid curing reaction, weather resistance, chemistry. Specifications Colourless transparent liquid Ester content (> 95.5%) Color (APHA) = 40 Viscosity CPS/25 C < 50 The acid value (mgKOH/g) is less than 0.5 Moisture < 0.1% Inhibitors (MEHQppm) = 300 Scope of application: Used in glass, metal, wood, optics, paper. Plastics, PVC floor coatings and offset printing ink, pressure sensitive adhesives, etc. Stability and storage: It is not a flammable chemical, but should be stored in a well-ventilated warehouse to prevent direct sunlight and heat isolation, in order to prevent high temperature metamorphism from gathering. Packaging: 25kg/plastic drum Shelf life: 24 months
Non-polluting antioxidant TH1520 macromolecule material antioxidant Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol CAS No. 110553-27-0 Molecular formula: C25H44OS2 Molecular weight: 424.7 Physical property: Melting point: 20 C Appearance: White crystals or colorless to yellowish liquids Specific gravity: 0.975-0.979 (20 C) Viscosity: 80-90 mPa.s (20 C) Technical Indicators: Content (>98%) Transmittance: 425 nm 95% Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc. Purpose: This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance. Packing, storage, transportation and precautions: Galvanized drum packing, net weight 200 kg; The product should be stored in a clean and dry place to prevent rain. When handling this product, strong rubbing should be avoided.
Ultraviolet absorber UV-1577 [English Name] TINUVIN 1577 UV-1577 2-(4,6-DIPHENYL-1,3,5-TRIAZIN-2-YL) -5-ï¼?ï¼? Phenol, 2-(4,6-diphenyl-1,3,5-triazin-2-yl) -5-(hexyloxy)- 2-(4,6-Diphenyl-1,3,5-triazin-2-yl) -5-[(hexyl)oxy]-phenol Absorbent UV-1577 [CAS: 147315-50-2 Structural formula: [Chinese Name] 2-(4,6-diphenyl-1,3,5-triazine-2-yl) -5-hexyloxyphenol Ultraviolet absorber UV-1577 [EINECS Number] 411-380-6 [Molecular formula] C27H27N3O2 Purpose: Usage: Ultraviolet absorbent 1577 is a new type of ultraviolet absorbent with low volatility and good compatibility with various polymers, copolymers and synthetic resins. Compared with the usual ultraviolet absorbent, it has better effect on polycarbonate and polyester. Product characteristics: Owende 1577 has low volatility, good compatibility, suitable for various aging conditions. Dosage: 0.2-5.0% Appearance: Light yellow powder Content (HPLC): 99% min Melting point: 147-149 C Volatile component: 0.1 Max Transparency: @450 nm 87.0% min @500 nm 98.0% min Storage and transportation: Pay attention to rainproof, moisture-proof and store in dry and ventilated place. Packaging: 25kg net weight cardboard drum (lined with PE bags); can also be packed according to customer requirements
Extreme Pressure and Antiwear Additive ACTOR THX-512B Cas: 72676-55-2 Composition: Thiadiazole derivatives Appearance: Yellow powder Indicator Detection Method Fineness 200 Pass Rate (> 99%) Screening and Washing Elemental Analysis of 17.5-19.7% Nitrogen Content Elemental Analysis of Sulfur 63.0-67.0% Testing Indicators: Based on Enterprise Standards Ash content 0.4% Density 25 degrees C 2.09 Mg/m3 Drying weightlessness 2 hrs. at 60-65 degrees C 0.40% Melting point 153-160 degrees Soluble insoluble in water and benzene Purpose: Actor-512B can be used to produce extreme pressure and antiwear additives for lubricating oil (ester) Packing: 25kg/drum Shelf life: sealed at room temperature for one year
