MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of MicroF_W168 is between 5.5 and 6.0 microns, and the maximum particle size is 21 microns. Application: Top grade water-based ink, water-based wood coating, Waterborne coatings, etc; Addition quantity: about 1%, can be added directly in the water-based system; Advantage: can be directly dispersed in the water-based system; Characteristics: good storage stability, good smoothness and wear-resistant performance.
By coating a layer of metal powder on the ceramic surface and sintering at high temperature to form a solidified and dense metallized layer, so as to realize the welding of ceramic and metal.
cookware non stick coating , is a two-layer coating ,which has wide application fields ,high performance cost ratio and good comprehensive performance . It is suitable for mid-end products . With excellent LGA performance , substrate is not exposed for 45 mins with good non-stickness . It complies with the GB standard and has excellent non-stickiness after testing . This performance is signficantly better than similar products in the market . It has high gloss and high gloss and high solid content , excellent non-stickiness, abrasion resistance and good market competitiveness .
Silway 742 silicone water-proof agent is hydrogen silicone oil emulsion, used for roof coating& masonry coating& clay coating& timber coating& other construction material's surface coating. Silicone water-proof agent have high flexible and mobile siloxane backbone could enable the water repelling methyl groups toorient themselves toward the surface, creating a water-proof " umbrella", and the unique ability of this "umbrella" is excellent breathable. Silway 742 also have following typical features: * High spreading and wetting capabilities, this lead to easily thoroughly cover a surface or penetrate a porous substrate * Permeablity to gas and water vapor * Resistance to UV(ultraviolet light), heat, and oxidative degeneration * Durability and mechanical and chemical adhesion Silway 742 typical application: * Water-proof coatings for roofs, masonry,clay product, timber and other construction applications * Water-proof elastomeric coatings for industrial and fashion textiles * Additives to improve the wash-off resistance of beauty and personal care products
Advanced Reflective Insulating Coating Reflective insulating coating is made of imported and domestic reflection, insulation raw materials, TAO, etc., self-crosslinking polymer. After the film is formed into a film, it has the characteristics of high heat-reflecting heat insulation, weather resistance, and excellent stain resistance. It can effectively reduce the surface temperature of the wall and is suitable for all kinds of building energy-saving projects. It is a new energy-saving waterproof and heat-insulating material that integrates anti-heat, radiation and barrier functions. The coating can reflect more than 85% of solar radiation and near-infrared light in the range of 400-2500nm (the solar reflectivity is 0.85), effectively preventing the heat accumulation of sunlight. At the same time, a thermal resistance material with extremely low thermal conductivity is added to the coating to effectively block the transfer of thermal energy.
high elastic acrylic waterproof coating Acrylic waterproof coating is a one-component water-based waterproof coating made of pure acrylic polymer emulsion based on other additives. Product Features: 1. Wet surface construction; 2. With water as the dispersion medium, it is non-toxic, tasteless and does not pollute the environment. It is an environmentally friendly product; 3, single component, cold construction, can be applied by brushing, rolling, spraying, scraping, etc.; 4, has good resistance to aging, elongation, elasticity, cohesiveness and film formation; 5, the waterproof layer is a closed system, the overall waterproof effect is good, especially suitable for the construction of the special-shaped structure base layer; 6. It can be used as a colored beautification protective layer for rubber asphalt black waterproof layer.
Granite Coating is a new non stick coating which developed base on the real granite color and texture. It has the excellent feature of high hardness,wear resistance,and favorable non stick function. By simple spraying or batch spraying, coating with resembles natural granite stone texture can be formed on the surface, bring the aesthetic feeling of elegance,harmony,solemn, and achieve the vivid effect to the nature.
Dyflon ceramic coating is produced by Sol-Gel method,it is liquid Ceramic.Main ingredients of ceramic coating are SiO2,Al2O3,TiO2 etc,the coating is compounds of inorganic substance in combination with physical and chemical structure,it is harmless to human, with excellent heat resistance,superior abrasion resistance and good nonstick. Also, emits much far-infrared radiation at high temperature,thus can make the dishes more tasty and good for health. Dyflon ceramic not only can be applied to cookware, but also widely apply to various industrial products such as hair straightener and heater etc.
MegaStone PRIMIUM Coating This product is drastically improved the characteristics of salt water resistance by special synthesis techniques of polymer and also increase its hardness by adding zirconia extracted from granite and ceramic compositions. It is shown more than 2 times higher abrasion and corrosion resistance to the existing coatings. Megastone paint has also higher function of durability and surface hardness like stone. 1ï¼?Features: 1ï¼?Application and Storage of products are good. 2ï¼?The best product that has a good combination of fluorine resin properties and the composition of Ceramic which has good hardness and wear resistance. 3ï¼?This product has chemical resistance, heat resistance, lubricity, plus adding the inorganic pigments which has Ceramic advantages, so harmless to human body, also Easy to dye, with acid resistant, wear resistance, anti-bacterial, Smell removal, Prevent chloride, emit far Infrared radiation. 2ï¼?Composition: Primer, Mid, Mottle, Top Attï¼?Joe Xu Emailï¼?joe-dyflon@foxmail.com
A multifunctional material produced by in-situ recombination, weak bond suspension, active coating and particle size expansion technology, which comprises a plurality of functional groups, such as nano short fibers, nano vapor phase silicon oxides, and non-metal complexes. Performance characteristics 1.LG-1520 has the effect of improving the wear resistance of the formulation and reducing the porosity of the part, which can extend the service life of the tire. 2.LG-1520 has the function of reducing the heat generation of vulcanized rubber by 5%-10%, so that the anti-aging performance of the rubber compound is greatly improved. 3. LG-1520 has excellent processability, including interfacial active components, which can reduce the energy difference between the interfaces of various materials in the formulation. It is easy to eat in the rubber mixing process, and the tire tread is pressed out and filmed. When pressed out, the dimensional stability is good, and the surface is fresh, smooth and elegant.
Theaoson zinc coating spray is composed of aerosol can, aerosol valve, paint liquid and propellant. This product uses bright silver powder imported from Germany. The color of the paint film produced after use has the same high-gloss galvanized color as the galvanized parts, it has the same color as the galvanized color that fades with the exposure time, so that there is no color difference in the repaired part coated on the galvanized part.
Theaoson dashboard polish wax contains special molecules to form a protective film on the surface of the material, which can effectively prevent aging effects such as dashboard and car interior decoration, and has the effect of decontaminization, anti-static, anti-ultraviolet and so on.
This product has good rust resistance and decorative products, color appearance and corrosion resistance of hot dip galvanizing similar, far more than ordinary silver paint. Strong adhesion, good weather resistance, easy to use, is a new decorative material corrosion. Advantage: Good rust resistance/color appearance and corrosion resistance of hot dip galvanizing similar/far more than ordinary silver paint/ Strong adhesion/good weather resistance/easy to use/ is a new decorative material corrosion. Suitable Range: Steel and iron exposed to corrosive conditions.
Introduction Pure Zinc & Zn/5Al are excellent material choices for corrosion protection in both atmospheric and marine environments. Using either the electric arc spray or combustion wire process, wire coatings of these materials act as sacrificial anodes, galvanically protecting iron or steel substrates.Decades of field work using these coatings has clearly demonstrated that they are far more effective and longerlasting than hot dip galvanizing. Coatings of ZnAl often have better corrosion resistance than either pure zinc or aluminum, by combining the advantages of both materials. This is particularly true in areas where crevices exist and residual moisture and contamination is present, and in areas where the coating has been scratched or scraped, resulting in coating voids and exposed substrate. Using the electric arc spray process, coatings of these materials are often used in the electronics industry for EMI and RF shielding, or as conductive coatings on capacitors. Typical Uses and Applications Atmospheric and immersion corrosion protection on large steel or iron structures such as bridges, roadway barriers, posts and poles, offshore structures and marine structures. Atmospheric corrosion protection on steel or iron components such as tanks and gas bottles EMI and RF shielding on plastic components (electric arc spray only) Electrical conductance on components such as the Conductive areas on insulators and capacitor end caps Product Details Chemical composition: Type Chemical composition Zn Al Others Zn 99.9+ Balance 0.1 Zn 15Al Balance 15 Specifications Grade AWS Zn C2.25/C2.25M W-Zn-1 Physical Properties Grade Density Rockwell Hardness Zn 7.14 g/cm3 ZnAl 7.18 g/cm3 Typical Deposit Characteristics: Grade Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab Zn HRB 20 - 30 6.9 - 15.0 Mpa 24 lbs /hr/100A 0.7 Good Zn 5Al HRB 40 -45 20.7 - 24.1 Mpa / / Good Standard Sizes & Packing: Diameter Packing Wire Weight 1/16 (1.6mm) D 300 Spool 15kg((33 lb)/spool Other sizes can produced based on customers' requirement.
Material : S/S with coating 2.5mm + S/S lid SS304 0.4mm body+1.7mm aluminum+0.4mm copper Packaging: Color Box MOQ: 1500pcs per each item 7.09 Sauce Pan with Lid: $21.09 7.87 Sauce Pan with Lid: $23.92 7.87 Casserole with Lid: $24.98 9.45 Casserole with Lid: $31.9 9.45 Fry Pan with Lid: $26.49 10.24 Fry Pan with Lid: $28.57
Coatings Optical Filter Optical Window Whenever light passes from one medium into another medium with different optical properties, most notably refractive index, part of the light is reflected and part of the light is transmitted. The intensity ratio of the reflected and refracted components is a function mainly of the difference in refractive index among the materials, the polarization of the incident light and the angle incidence. Whenever light passes from one medium into another medium with different optical properties, most notably refractive index, part of the light is reflected and part of the light is transmitted. The intensity ratio of the reflected and refracted components is a function mainly of the difference in refractive index among the materials, the polarization of the incident light and the angle incidence. As light passes through an uncoated glass substrate, approximately 4% will be reflected at each surface, this result in a total transmission of only 92% of the incident light. Coating each component will increase the throughput of the system and reduce hazards caused by reflections traveling backwards through the system (ghost images). Optical coatings are often used to alter the reflectance, transmittance, absorbance, or polarization properties of optical components. The components being coated are usually called the substrates. The coating layer is deposited in high vacuum using the process of evaporation by either e-beam, or IAD(Ion Assisted Deposition). Coating materials include metal such as Au, Ai, Ag, Cr, etc. And semiconductors such as Si, Ge.
Differences between Spray Paint and Electrostatic Powder Coating: 1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes. 2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns. 3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health. 4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius. 5. The same grade of Powder is cheaper than lacquer. 6. The strength of the powder is better than the ordinary paint. 7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost. Hebei Hanna technology CO., LTD. 's Fast Automatic Powder Color Changing System can change color rapidly for 15 minutes. It saves manpower and time. This is really good for you if you have more color on your workpiece to change. And the Big Cyclone can achieve 99.2% recovery. It's economical and environmentally friendly.
The series of products are made of saturated carboxylpolyester resin, TGIC or HAA, rutile titanium dioxide ,which are the main raw materials.They have good UV resistance and play a good protection and decorative properties for the application of outdoor metal workpiece surface.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Type:UV Gel Brand Name:LADISGEL Model Number:rubber top coat Place of Origin:Guangdong, China Certificate:SGS GMPC ISO MSDS Color:Clear MOQ:12pcs Volume:10 ml/bottle Smell:Odorless Soak off:EasilyLasting time: 3-4 weeksService:Sample+OEM Application:Lady's Nail Beauty Cure time:LED Lamp 30s UVLamp 2mins
