SECrosslink-5700 low-temperature rapid curing, printing lines with excellent flatness, no burrs, thin line width, thin thickness, very low volume resistivity, good adhesion to glass, PET and other materials, in line with the EU and other environmental requirements. Brand SECrosslink Type SECrosslink-5700 Curing temperature 100 appearance Silver gray Content of effective elements 90% Volume resistivity 0.0000©cm Shelf life 12 months Product grade Excellent Storage method -10-0 Adhesive force Excellent
SECrosslink-6260 high thermal conductivity, high electrical conductivity, low ion content, single component, high temperature resistance, high Tg, high hardness, used for standard LED devices. Brand SECrosslink Type SECrosslink-6260 Curing temperature 150 /1 h Resin types Epoxy Thermal conductivity 5 w/mK Tg 220 Feature high thermal conductivity, high electrical conductivity, low ion content, single component, high temperature resistance, high Tg, high hardness, used for standard LED devices Content of effective elements 90% Appearance Silver gray Usage temperature -30 - 260 Silver content 89% Viscosity 40000CPS Shearing strength 25MPa Storage T -10 - 0
SECrosslink-6261 high thermal conductivity, high electrical conductivity, low ion content, single component, high temperature resistance, shock resistance, used for chip bonding. Brand SECrosslink Type SECrosslink-6261 Curing condition 200 /40 min ECA types Nano-silver Silver content 92% Viscosity 32000CPS Thermal conductivity 150 w/mK Shearing strength 35MPa Silver content 91% Application Die attach Appearance Silver gray Usage temperature -30 - 400
SECrosslink-6061 is two-component, conductive adhesive cured at room temperature, high conductivity, high temperature resistance, impact resistance, high bonding strength, no solvent, etc. Brand SECrosslink Type SECrosslink-6061 Curing method Room Temperature Curing Adhesive types Epoxy Substrate NO Solvent Solvent-free Feature Quick curing conductive adhesive at room temperature (4 hours) Application Electronics and semiconductors Content of effective elements 100% Appearance A Metal colour B silver grey Viscosity 80000cPs Shearing strength 15MPa Volume resistivity 0.0001©cm Curing time 4h/25 Hardness Shore A 86 Storage T 0-10
SECrosslink-6063 is solvent-free and fast curing at low temperature. It is used for electronic components, ceramics, glass, silicon wafers, metals and other components that need to be bonded. It is suitable for FIP process. Brand SECrosslink Type SECrosslink-6063 Product Low temperature curing type conductive silver adhesive Curing temperature 100 Adhesive types Epoxy Application Electronics and semiconductors Appearance Silver gray Density 4.5g/cm3 Content of effective elements 87% Volume resistivity 0.00005©cm Curing time 0.5h Shelf life 6 months
SECrosslink-7503 fast curing, single component, weldability - meets weldability and weldability test, excellent contact resistance, high adhesion, suitable for screen printing process, used in photovoltaic solar energy and other electronic fields. (HJT solar battery) Brand SECrosslink Type SECrosslink-7503 Product name HJT silver paste Resin type epoxy Appearance Silver gray Application HJT solar paste Density 4.6g/cm3 Adhesive force excellent Silver content 91% Volume resistivity < 7 ©*cm Silver content Cured paste 99.5% Peeling strength 1.5 N Thermal conductivity 156 w/mK Usage T -30 - 300
SECrosslink-7800 low-temperature sintered type, weldable, suitable for glass electrode, ceramic thermal resistance and other areas requiring extreme temperature resistance. Brand SECrosslink-6 Type SECrosslink-7800 Sintering temperature 650 Resin epoxy Silver content 91% Viscosity 40000cPs Volume resistivity 9 ©*cm Usage temperature -30 - 800 Adhesive force excellent Feature Low temperature sintering, high adhesion, good electrical conductivity
At-701s is a kind of styrene acrylate synthetic latex, which has good bonding performance on the back of ceramic tile, vitreous brick and marble brick. AT the same time, the product has excellent bonding strength after immersion and fast drying speed, especially suitable for making ceramic tile back coating. Appearance milk white liquid Solid content:52-53% PH :7.0-9.0 Viscosity :500-1000 cps (3#60/25 Particle size :0.1-0.2 micron MFT: 0 Ion features: anion Use :At-701S is a water-based emulsion used for gluing the back of ceramic tiles. It has excellent adhesion properties for ceramic tiles, glass tiles and marble tiles.
Hightite® line of instant adhesives are available in a variety of viscosity, curing speed, gap-filling capability and substrate compatibility. Used for fast bonding many materials such as metal, rubber, plastic, glass, leather, wood, ceramic etc. W401 Colorless low viscosity, universal type,apply for wide range of materials surface, including electroplate or porous substrate surface. 90 10 20 -54~+121 20ml 500ml W403 Colorless to paste yellow liquid low albefaction,low odor,high viscosity, suitable for requiring high aesthetic appearance. 1200 40 20.3 -54~+93 20ml 500ml W406 Colorless lower viscoisity,used for plastic and rubble fast bonding, including EPDM or other elastomer. 17 15 15.5 -54~+121 20ml 500ml W460 Colorless to paste yellow liquid low viscosity, low albefaction and odor.suitable for requiring high aesthetic appearance. 40 50 30 -54~+93 20ml 500ml W495 Colorless to straw color universal type, wide range for various kinds plastic and metal bonding. 33 20 14.2 -54~+121 20ml 500ml W4204 Colorless to straw color resistance to high temperature and shock, used for loundspeaker assemble. 4000 60 19.3 -54~+121 20ml 500ml W480 Black black toughened adhesive, used for rubble materials bonding, slow curing. 150 90 30 -54~+121 20ml 500ml
Hightite HT8621 is a one component heat curing epoxy adhesive. Suitable for screen printing. This product has excellent heat resistance, excellent moisture resistance and adhesion strength, electrical properties, has good storage stability. 1. HT8621 is a one component heat curing epoxy adhesive. 2. This product has excellent heat resistance, excellent moisture resistance and adhesion strength, 3. Electrical properties, has good storage stability. 4. Mainly used for STM bonding components. 5. Before using the adhesive must be returned to room temperature,dont open the package to prevent adsorption of moisture in the air and affect the using. 6. .Recommendation printing speed 20-150mm/s; scraper force 3-4N/cm;Take off the plate speed is 0.1-3.0mm/s. 7. Factory directly, low price, OEM service. 8. Free sample.
poxy resin glue is epoxy fiber adhesive of high performance, can be used for the effective penetration bonding between many substrate materials, such as concrete, steel material, ceramic, stone, wood component and many fiber plate such as carbon fiber plate, basalt fiber plate, glass fiber plate etc. It is mainly used for the strengthening and reinforcement of buildings, bridge and civil construction. Classification: Double components adhesive Mixing Ratio: 2:1 (A:B) Viscosity: 4000-6000 Pa.s Appearance: Viscous Liquid Color: White & Black Uses: Construction, Fiber & Garment, Footwear & Leather, Packing, on concrete substance etc.
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized Cap option: small screw up, big screw up cap, flip top cap etc. Printing : 1, 6 color offset printing Sample time Samples can be finished around 15 days after payment and artwork's final approval. Payment term Magnetic T/t, 30% down payment, 70% before shpt. Quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state, of, the, art, high, speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation.
Technical specifications of conductive adhesive tape Shield efficiency,impedance of clip measurement are the best,it can be used for the high Radiation instruments of electronic industries,medical industres,electromagnetism,special shield cloth of shield room and special cloth of shield parts in IT industry.
Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc The introduction of adhesive CHMA805 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified polyester sheet, thermoplastic plastic, grp, aluminium alloy. Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc The feature Strong bond performance CHMA805 adhesive exhibits superior bond strength on acrylic solid surface. Faster cure at room-temperature It features a working time of 8-13minutes, cure time of 20-25 minutes and can Be sanded after 25minutes. Create seamless joints Advanced bonding strength and various surfacing colors assist the fabricators To produce virtuallly invisible joints on bonded surface. Custom colors available Extensive colors available and all brands of acrylic solid surfaces colors can be Designed and formulated. Excellent performance It is uv stable and enronmental friendly for all articles are comply with european Commission directive. It has excellent resistance to wear, impact, water, oil and High temperature. Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc Supplied in ready-to-dispense cartridges 50ml dual cartridge&two mixing tips /per set 75ml dual cartridge&two mixing tips/per set 250ml dual cartridge&two mixing tips/per set Reduce labor and time with dispensing accossies Manual applicator gun & motionless mixing tip Long shelf life : 24 MONTHS It can be stored for one year from shipment day. Provide adhesives for private label customers Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc Standard export package.50ml dual-cartridge , 75ml dual cartridge 250ml dual-cartridge
No Yellowing Acrylic Solid Surface eg: Corian,Staron Strong bond performance No Yellowing Acrylic Solid Surface eg: Corian,Staron exhibits superior bond strength on acrylic solid surface. Faster cure at room-temperature It features a working time of 8-13minutes, cure time of 20-25 minutes and can Be sanded after 25minutes. Create seamless joints Advanced bonding strength and various surfacing colors assist the fabricators To produce virtuallly invisible joints on bonded surface. Applicator guns Handguns are very convenient and are desired in most situations, these are high quality professional tools that will provide years of service Static mixer tips Static mixer tips are attached to the tip of the cartridge, and as the gun handle is depressed, glue and activator are extruded out of the 2-part cartridge, where they are mixed thoroughly in the static mixer tip as the two materials are driven through the tip. After passing through the static mixing tip, the fully mixed glue is dispensed at the tip of the static mixer tip. No Yellowing Acrylic Solid Surface eg: Corian,Staron The introduction of adhesive Chma600 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified polyester sheet, thermoplastic plastic, grp, aluminium alloy.
1.Jinhua clear and transparent epoxy resin ab glue made from basic pure resin and do well in adhesive. 2.Good at uv and yellow resistance, self leveling, without bubble, high brightness. 3.Can be cured at nomal temperature or by heating. 4.Clear, low viscosity, nature defoaming, super transprency and good performance after mixed. 5.Can get any color you want by add pigments. 6.Easy to clean and repair. 7.No ripple, bright in surface, odourless, eco-friendly, nontoxic, waterproof and so on. -
Low viscosity, with the mixing ratio of 100:33 by weight, will be cured at about 10hours in room temperature. 5kgs per bottle, 4bottles per carton
We are the biggest supplier of white fused alumina in china, we are also the standard setter of the white fused alumina in china.We have been in the industry since 1987. White corundum: fused alumina is widely used as a raw material in refractories, ceramics shapes, grinding wheels, sandpaper, blasting media, metal preparation, laminates, coatings, lapping, polishing, grinding and hundreds of other applications.Zhengzhou yufa, white fused alumina grains and powders are available in standard grit and powder sizes and they can also be made to individual specifications.
Description: - size: lxwxh=150x90x59mm - color: black and white color available. - n.W: 0.15kgs - led: 3pcs led - uv wavelength: 395-405nm - adapter in put: 110v-240v 50/60hz - adapter out put: dc 12v 0.5a - packing: 40pcs/ctn - ctn size: 64x34x34cm - g.W:13kgs Features: 1. Preset 45 second and 60 second timer. 2. Never need to replace led bulbs. 3. Ergonomic design for comfort 4. Compate design to save table space. 5. (3)2-watt led lights[=6watts] 6. Pro light has consistent power and performance from the first second out of the box through to the 50000 hours. 7. Limited warranty. Description: - size: lxwxh=150x90x59mm - color: black and white color available. - n.W: 0.15kgs - led: 3pcs led - uv wavelength: 395-405nm - adapter in put: 110v-240v 50/60hz - adapter out put: dc 12v 0.5a - packing: 40pcs/ctn - ctn size: 64x34x34cm - g.W:13kgs
en-free copper no less than 0.0165ohms mm2/m, t2 copper no less than 0.0172ohms mm2/m. 4. Solder tin component: 63%sn37%pb£¬60%sn40%pb(tm-a), 96.5%sn3.0%ag0.5%cu£¬99%sn1%ag(tm-b), 62%sn36%pb2%ag (tm-c) 5. Solder tin melting point: 179-217 6. Tensile strength: no less than 200n/mm2 7. Extensibility: no less than25% 8. According to customer requirements, we can provide different chemical coating and different sizes of products Normal packing
