Glycol Ether EB is a colorless liquid that works as an excellent solvent used in wax strippers, cleaners, degreasers, inks, water based paints, coatings, varnishes, enamels, and lacquers. It is used as a solvent for coatings resins like alkyd, phenolic, maleic, epoxy, and nitrocellulose resins. It acts as an ingredient in antimicrobial agents, adhesives, stabilizers, defoamers, drilling stabilizers, oil slick dispersants, and water- and oil-based fracturing fluids. Glycol Ether EB is an important component in household and industrial cleaners, enhancing wetting and cleaning ability. It's used in a variety of , sunscreens, cosmetics, inks, dyes and household & industrial cleaners. Sales Specification Appearance: Clear liquid Purity: 99.50 % Color (APHA): 10 Moisture: 0.10 % Acidity as acetic acid: 0.01 % Packing 407.85 lb drum each, 4 drums per pallet. 1984.14 lb tote DOT Transportation UN Number: NA1993 Proper Shipping Name: Combustible liquid, n.o.s., (2-PROPANOL, 1-BUTOXY-) Hazard class: CBL Packaging Group:III
Glycol ether DB is a colorless liquid solvent known for its water solubility and slow evaporation. Glycol ether DB has primary uses in cleaning products and coatings. Glycol Ether DB is an outstanding solvent and coupling agent that acts by itself or in combination with surfactants to lower the surface tension of cleaning solutions in household and industrial cleaners. It has an alcohol component to dissolve water-soluble soils and an ether part to dissolve oil-soluble soils. It is used as a diluent and solvent in resins, polymers, paints, coatings, silk screen printing inks, pen inks, textile dyeing, printing, oils, nitrocellulose, gums, dyes, and soaps. It is used as a coalescing agent in latex paints and as a coupling agent in disinfectants, hard surface cleaners, rust removers, and water-based printing inks. It's also used as a metal cleaner and as a dye solvent in the textile industry. Specifications Appearance: Conforms Color pt co: 10 Max Butyl Carbitol Solvent wt%: 99.0 Min Acidity wt%: 0.010 Max Water wt%: 0.10 Max Specific Gravity at 20/20 C: 0.9515 -0.9555 Packing 441 lb drum, 4 drums per pallet 2116.42 lb tote
Glucono delta-Lactone, FCC is used as a sequestrant, a leavening agent, and an acidifier. It is also used as food additive and preservative in food production, beverage, pharmaceutical, cosmetics, and various other industries. The FCC grade meets the requirements of the Food Chemical Codex indicates and is suitable for all food, beverage and nutritional supplement applications. Specification Characteristics: White Granular Powder Indentification: Positive Lead (,1mg/kg): 10 PPM Heavy Metals (asPB
Gluconic Acid 50% FCC is mainly used as a chelating agent in foods, cleaning applications, electroplating, concrete admixtures and as an Acidulant in foods. It is used in food like dairy, flavors, instant meals, and sauces and dressings. It's used in personal care products like hair, oral and skin care. It is also used in industrial cleaners and surface care products. Gluconic Acid is also used in fine chemicals, agrochemicals, fertilizers, metal surface treatments and textile & leather. Specifications Appearance: Clear, Light Yellow Liquid Reducing Substances: 0 -2% Lead: 0 -1 PPM Chloride: 0 - 140 PPM pH (10% soln.): 2 - 3 Sulfate: 0 - 500 PPM Heavy Metals (as Pb): 20 PPM Max Arsenic: 0 - 3 PPM Gluconic Acid: 49.5- 50.5% Specific Gravity: 1.21 - 1.27 Acetic Acid: 0 - 0.4% Oxalates: 0 - 0.2% Yeast/Mold: None Residue on Ignition: 0 - 1% Mercury: 0 - 1 PPM Packing 2,500 LB tote
Fructose is a common sweetener in food manufacturing, and is also used in and as a renewable chemical building block. It has many applications in food and beverages, including in baked goods, carbonated beverages, dairy products, jams and jellies, and canned fruits. Specifications Appearance: White crystals, free flowing, no foreign matters Fructose content (on drying, HPLC method), %: 99 Loss on Drying, %: 0.5 PH: 4.0-7.0 5-Hydroxymethy furfural, %: 0.32 Chloride, %: 0.01 Sulphated Ash, %: 0.05 Heavy Metal, ppm: 5.0 Arsenic, ppm: 1.0 Lead, ppm: 0.5 Total Plate Count, cfu/g : 3000 Mold, cfu/g: 25 Yeast, cfu/g: 25 Coliforms, mpn/g: Negative Salmonella, 25g: Absent Conclusion: Conforms to the testing standard Packing 55.115 lb bag, 40 bags per pallet
Formic acid, the simple carboxylic acid is a colorless liquid. A major use of Formic Acid, is as a preservative and antibacterial agent in livestock feed. It is also used for decalcifier; reducer in dyeing for wool fast colours; dehairing and plumping hides; tanning; electroplating; coagulating rubber latex; silage and grain preservation; additive in regenerating old rubber; solvents of perfume; lacquers; alkylating agent for alcohols; carboxylating agent for tertiary compounds. Its used in water treatment and dyeing and finishing paper, also in the production of fumigants and refrigerants. It is also used as an intermediate for the production of a wide variety of products in the chemicals and pharmaceutical industries. Physical And Chemical Properties Physical State: Colorless liquid with a pungent odor Melting Point: 8.3 C Boiling Point: 100.7 C Specific Gravity: 1.21 Solubility in Water: Miscible Vapor Density: 1.6 NFPA Ratings: Health: 2; Flammability: 2; Reactivity: 1 Flash Point: 69C Stability: Stable under ordinary conditions Sales Specification Appearance: Clear Water: 10% Formic: 90% Color: 6PT-CO Typical Values Acetic Acid:
Ferrous Sulfate Monohydrate is an inorganic compound that serves a variety of functions and applications like, in agriculture, Ferrous sulfate monohydrate granular can be used as micro fertilizer to prevent crops from iron deficiency; used in crops and plants. Meantime, it is the catalyst making plants green and important for plant absorption. You can also use to reduce the alkalinity in soil on farms. In animal feeds, Ferrous Sulfate monohydrate granular can be used as feed additive to cure animal's ferrous deficiency. As a blood tonic substance to livestock, it can stimulate the growth of animal body. Ferrous sulfate monohydrate granular can also be used as a coagulant and flocculant. It can also be used to make pigment such as red ferric oxide and it serves as a dye fixative in the textile industry. It makes up the constituent of ink and can be used in leather blackening. It's used in cement chromate reduction as a reduction agent; it can also serve as a color pigment for concrete, limestone and sandstone. Sales Specs Appearance: Gray Solid Purity (%): 91 Min. Fe (%): 30 Min. Sulphur (%): 17 Min. Cd (ppm): 5 Max. Pb (ppm): 15 Max. As (ppm): 2 Max. Hg (ppm): 1 Max. Mesh size: 95% pass through 20-60 mesh Particle size: 0.1-1 MM Packing 50 lb paper bag/ 44 bags per pallet
Ferrous Sulfate Heptahydrate has applications in the agricultural industry due to its high iron solubility, and is widely used as a reagent in analytical chemistry for its resistance to oxidation. Ferrous Sulfate Heptahydrate can be used as moss control and micro-nutrients in the fertilizer industry. Uses of ferrous sulfate heptahydrate range from being mainly used in the manufacture of iron salt, ink, magnetic iron oxide, water purifying agent, paint pigment, iron catalyst, as coal dye, tanning agent, bleaching agent ,component in weed killers, wood preservative, compound fertilizer additive, feed , and processing of ferrous sulfate monohydrate. Ferrous sulfate heptahydrate is used as a reducing agent for decolorization and flocculation. Sales Specs Appearance: Bluish green crystals Purity (%): 98 Min. Iron (Fe) (%): 19.7 Min. Arsenic (As) (ppm): 10 Max. Heavy Metal (as Pb) (ppm): 20 Max. CD (ppm): 10 Max. Packing 50 lb bag, 44 bags per pallet
Ferrous Gluconate Dihydrate USP also know as Iron(II) Gluconate Hydrate is a compound that has acidic properties. It is produced by the dehydration of iron gluconate and is used in many different applications, such as photoelectron spectroscopy, magnetometry, and dispersive analysis. Ferrous Gluconate Dihydrate USP can also be used to produce coagulated blood samples, which are then analyzed using infrared spectrometry or microscopy. Ferrous Gluconate Dihydrate USP is also used as an iron supplement and food additive in the food and pharmaceutical industries. It is also used as a nutrient source for microorganisms in fermentation processes and as a laboratory chemical for research and development. Specifications Assay: 97.00% -102.00% Identification: Conforms Reducing Sugars: Conforms Oxalic Acid: Conforms Loss on Drying: 6.5-10.0% Chloride: 0.07% Sulfate: 0.1% Lead: 0.001% Mercury: 3ppm Arsenic: 3 ppm Ferric Iron: 2.0% Packing 55.12 LB Drum
Ferrous chloride, solution is the greenish-white crystalline solid dissolved in water. It is used in pharmaceutical preparations, for sewage treatment, and as a mordant (which fixes dyes so that they will not run) in textiles. It serves as a coagulation and flocculation agent in waste water treatment as well as odor control. It is also used as a precursor to make various grades of hematite that can be used in a variety of pigments. It is the precursor to hydrated iron (III) oxides that are magnetic pigments. Sales Specification Appearance: Green to Dark Color Liquid Ferrous Chloride(FeCl2): 18% -32% Fe(II): 8%-14% Typical Analysis Ferrous chloride as FeCI2: 28.0%-30.0% Specific Gravity @ 68 F: 1.312 g/ml Free Acid: 0.50%Max Ferric Chloride as FeCI3: 3300 ppm Max Packing In 2995 LB Tote DOT Transportation Information: UN No.:UN1760 Proper Shipping Name: Ferrous Chloride, Solution Hazard Class: 8 Packing Group: II RQ The Reportable Quantity (RQ) under CERCLA is 100 lbs
Ferrocene 98% is used as a fuel additive for petrol engines and catalyst in rocket fuel. It acts as a photosensitive catalyst and promotes the photochemical degradation of plastic films. It is also used as laboratory chemical. Specifications Appearance: Orange-yellow Powder Purity (%): 98.5 Melting Point (oC): 172 ~ 174 Free Fe Content (PPm): 300 Insoluble Matter in benzene (%): 0.50 Packing 25 KG drum, 12 drums per pallet DOT Transportation UN: 1325 Proper shipping name: Flammable solids, Organic N.O.S (Ferrocene) Hazard class: 4.1 Packing Group: II
Ferric Chloride 38-42% Solution is a light brown aqueous solution with a slight hydrochloric acid odor. It is highly corrosive to most metals and noncombustible. It is primarily used in water and waste water treatment as a flocculant, but it's also used as a chemical intermediate in metal treating, as an etching agent in printed circuit boards and electronics and odor control. Functions Flocculant Etching Agent Chemical Intermediate Sales Specification Appearance: Dark Brown Liquid FeCl3: 38-42% Fe(III): 13.1-14.5% Fe(II):
Ferric chloride hexahydrate is used in applications such as a flocculant in water and waste water treatment industry, as a chemical intermediate in metal surface treatment for the Metal Finishing and Painting Compounds Industry; it's also used as a component in soil remediation for the agricultural industry. Functions Flocculant Chemical Intermediate Agrochemical Component Sales Specification Appearance: Yellow Crystals Assay: 99.0% Min Lead (Pb) content: 2.5PPM Max Insoluble in water: 0.1% Max Free Acid (HCl): 0.1% Max Sulfate (SO4): 0.01% Max NO3: 0.01% Max PO4: 0.01% Max Mn: 0.02% Max Ferrous: 0.002% Max Cu (Copper): 0.005% Max Zn (Zinc): 0.003% Max As (Arsenic): 0.005% Max (SO4 2-) Unprecipitate by NH3: 0.1% Max Packing 25 KG drum, 27 drums per pallet DOT Transportation UN No.: 3260 Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. Ferric Chloride Hazard Class: 8 Packing Group: III
Ferric Ammonium Oxolate is used in the preparation of Langmuir-Blodgett magnetic thin films. It is also involved in the production of blueprint paper. Its also used As a precipitant of calcium and magnesium. Ferric Ammonium Oxalate is used in the electroplating industry for the chemical absorption on anodized aluminum, producing a range of gold colors from light champagne hues to dark gold finishes. Specifications Appearance: Light Yellowish Green Crystal Content: 99.0% Fe: 12.65~13.30% PH 4.2-5.5 Packing 55.12 KB Bag, 40 bags per pallet DOT Transportation Information: UN/NA: 3077 Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (Triammonium Iron (3+) trioxalate trihydrate) Reportable Quantity (RQ): 1000 lb Poison Inhalation Hazard: No Hazard Class: 9 Packing Group: III
The major use of ethylene glycol is as an antifreeze agent in the coolant in for example, automobiles and air-conditioning systems that either place the chiller or air handlers outside or must cool below the freezing temperature of water. In the plastic industry, ethylene glycol is an important precursor to polyester fibers and resins. Ethylene glycol is used in the natural gas industry to remove water vapor from natural gas before further processing. Minor uses of ethylene glycol include the manufacture of capacitors, as a chemical intermediate in the manufacture of 1,4-dioxane, as an additive to prevent corrosion in liquid cooling systems for personal computers, and inside the lens devices of cathode-ray tube type of rear projection televisions. Sales Specs Appearance: Colourless Liquid Purity: 99.1% Min Diethylene Glycol: 0.6% Max Acidity: 20 PPM Max Water: 0.3% Max Color (Pt-Co): 10 Max Iron: 1 PPM Max Packing 507.80 LB drum, 4 drums per pallet 2204.60 LB tote
Ethylenediaminetetraacetic Acid (EDTA) is mainly used as a chelating agent and in the paper industry, home industrial and institutional care industry and agriculture industry . Specifications Appearance: White Crystalline Powder Assay (as C10H16N2O8) %: 99.00 Chlorides %: 0.05 Sulfate (as SO4 2-) %: 0.02 Heavy Metal(as Pb) ppm: 10 Ferrum ppm: 10 PH Value (50g/L:2C): 2.8-3.0 Chelation Value mg (CaCO3)/g: 339 Loss on Drying %: 0.20 Packing 55.12lb paper bag, 40 bags per pallet 2204.6 LB Supersacks
Ethyl Vanillin FCC is used as a flavoring agent that is a synthetic vanilla flavor. It is used in ice cream, beverages, and baked goods. It's also used as a Flavoring & Nutritional ingredient in animal feed. It is also used in Odor masking for perfumes and pharmaceuticals. Ethyl Vanillin FCC is used as chemical intermediate Personal Care, Cosmetics & Fine Chemicals. Specifications Appearance: Fine white to slightly yellow crystals Identification: Pass Assay: 99.0% Min Melting Range:76 - 78oC Loss on Drying: 0.5% Max Residue on Ignition: 0.05% Max Solubility: 1 g dissolves in 100 ml of water (50oC) or 5 ml in 95% Ethanol Packing 55.12 LB Carton, 40 Carton per pallet
EDTA Zinc is a powerful chelating agent and acts as a micro-nutrient in agriculture and horticulture. It is used as a fertilizer to overcome Zinc deficiency in plants, as well as a source of Zinc for those plants which require Zinc for their normal growth and higher yields. It also forms stable complexes with metal ions. Specifications Appearance: White Powder Chelate Zn?%: 14.5 - 15.5 % Water Insoluble: 0.1% Max ph (1% Water Solution): 6.0 - 7.0 Packing 55.115 lb paper bag, 40 bags per pallet
EDTA Manganese is mainly used as a chelating agent and plant nutrient in the agriculture industry. EDTA Manganese is widely used as an element required in foliar fertilization of soil application in the field of agricultural horticulture. EDTA manganese is also a trace element required in aquaculture and is a stable water-soluble metal chelator. Specifications Appearance: Light Pink Powder Chelate Mn (%): 12.5-13.5 % Water Insoluble: 0.1% Max ph (1% Water Solution): 6.0 - 7.0 Packing 55.115 lb paper bag, 40 bags per pallet
EDTA Iron is used as complexing agent, oxidizing agent, it is used in photographic materials developed spray and as a bleaching agent and plant nutrient for fertilizers. Specifications Appearance: Yellow Powder Chelate Fe %: 12.5 - 13.5 % Water Insoluble: 0.1% Max Ph (1 % Water Solution): 3.8 -6.0 EDTA Value: 65.5 - 70.5 % Packing 55.115 lb paper bag, 40 bags per pallet
