TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place.
4. Advantages/features
1. Simple structure and easy installation
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
7. left and right fans run alternately in cycles to ensure even heating
8. Automatically replenish fresh air
TL-1 burning furnace is consists of 5 parts: natural gas burner + inner tank + insulation box + fan + control system. The burner forms a high-temperature flame after full combustion in the high-temperature resistant inner tank, these flame mixes with the cold or recirculated air to produce a new and high-temperature air. Under the action of the fan, it is discharged to provide heating for drying machines or places.
Advantages/features
1. Simple structure and low cost
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
The bell-type sintering furnace is a high-temperature sintering furnace for cyclic operation, with a shear screw lifting system for the lifting of the firing table. It can be used for intermittent production sintering process of ceramic products such as zirconia, alumina and dielectric ceramics.
Features
1. maximum temperature of 1500C and 1650C (two models of temperature are available);
2. Special riveted structure is chosen for the furnace chamber fixing, no cracking and collapse of the top for long-term use.
3. Linear guide design, smooth movement without jitter, loading and unloading products is extremely convenient and safe.
4. Pre-embedded corundum mullite at the bottom of the bearing plate to enhance support, to prevent the bearing plate from sinking and sinking.
5. Multi-stage programmed temperature control, PID adjustment, to meet the sintering requirements of multiple multi-stage process curve storage
6. Over-temperature protection function, over-temperature automatic power off.
7. High precision B-type thermocouple, accurate temperature measurement
8. Heating element is U-type silicon molybdenum rod MOSI2
9. Additional option: tail gas treatment combustion cracking device
FMJ series high temperature chamber furnace adopts vacuum adsorption ceramic fiber chamber, multi-layer insulation material heat insulation, fast temperature rise, strong resistance to thermal shock, extremely low surface temperature, MOSI2 heating element, long service life, professional fixture to fix the heating element, easy disassembly. There are desktop and floor structure for different applications in ultra-high temperature, stable control, uniform temperature difference, good repeatability, very suitable for ultra-high temperature use environment of universities, research units laboratory.
Features
1. Working temperature 1000 1600 and 1000 1700
2. Intelligent programmable temperature control instrument can edit, store and call multi-segment program.
3. Over-temperature protection function, when the temperature exceeds the allowable setting value automatically power off.
4. Safety protection when the furnace body leakage automatic power off.
In the manufacturing of micro dual-port polyimide heaters, polyimide is a lightweight and thin organic polymer film that exhibits excellent tensile strength, tear resistance, and stability. Thin film heaters made of polyimide possess the characteristic of micro dual ports. They demonstrate outstanding flexibility, bending capability, solvent resistance, and durability during usage. As a result, they are highly suitable for applications in low-outgassing or vacuum environments that require resistance to radiation, fungi, and chemicals.
Polyimide can adhere to various complex surfaces to achieve uniform heat distribution on the heating surface. They can be designed to heat specific regions with different power densities from the main area. This selective heating in the desired region further reduces energy consumption, making it cost-effective. Danyu can mass-produce polyimide heating elements and provide customized polyimide flexible heaters.
Applications:
Polyimide heaters are well-suited for extreme temperature applications. They can maintain a temperature range of -40�°C to 200�°C during operation. They also feature temperature control devices that enable them to retain their original shape regardless of the exposed temperature. Polyimide heaters are particularly suitable for aerospace and satellite equipment, extreme temperature environments, and situations that require rapid or surface heating.
Rotary tilting refining furnace
The rotary tilting refining furnace is mainly used for the pyrometallurgical refining of recycled metals (mostly used for impure copper). In order to improve the technical and economic comprehensive indicators of the tilting refining furnace, it is best to have a copper grade higher than 90% when entering the furnace. For raw materials with lower copper grades, it is best to first undergo pre-treatment in the blast furnace and blowing furnace before entering the tilting furnace.
The furnace body of the rotary furnace is installed on a rotating frame, which, under the action of a hydraulic cylinder, can tilt the furnace body within a certain angle range to achieve process actions such as feeding, melting, and dumping slag. At the same time, the furnace body can rotate around its axis under the action of the transmission mechanism; The rotary motion improves the heating efficiency of the furnace and is of great significance for the overheating of the molten metal.
When melting metal in this furnace, a certain amount of slag forming agent needs to be added. The molten slag forming agent and slag liquid have a protective effect on solid and liquid metals, which can prevent metal oxidation
The burning loss rate of elements such as silicon and manganese in a rotary cupola is equivalent to that of a coke burning cupola. The content of carbon elements in the rotary furnace is decreasing, so it is necessary to add a certain amount of carburizing agent ( graphite) to the furnace material.
Main features:
1)Can control the two heating zones individually with two instrument
2)Chamber veined with 12 sets of resistance wire, achieve uniform tem. field and longer constance zone.
3 Equipped with support frame for flange, reduce the load of tube body
4 Pneumatic spring for opening, which is safer for the operator.
5 Open type makes convenient for operation
Technical Parameters
Power
Power rated: 5KW (208-240V)
Voltage
Voltage rated: AC208-240V 50/60HZ
Working Temperature Max. Temperature: 1200 °C
Continuous working temperature: 1100
Heating Rate: °C /min
Temperature Controller
PID automatic control and auto-tune function.
30 programmable segments for precise thermal processing.
Built-in protection for the over-heated and broken thermocouple.Â
Length of heating zone
200+200mm
Length of constant zone
100+100mm
Heating Elements
Resistance wire, Fe-Cr-Al Alloy doped by Mo
Temperature Accuracy
+/- 1 °C
Processing tube
High quartz tube:25/50/60/80/100*1000mm(optional)
Tube blocks are included for blocking heat radiation generated from tube center. Must be fully inserted into the furnace chamber before heating at the correct position. ceramic or quartz blocks are optional
Net Weight 40kg
Dimensions
590*380*500mm(L*W*H without tube & flange)
Vacuum Flange KF25 quick clamp flange
Vacuum Pressure
10-1pa can be achieved by a mechanical pump
10-3 pa can be reached by molecular pump
