We have stock of 400 MT Furnace Oil for sale
1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low equipment investment Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;
Electric Heating Conduction Oil Furnace Details Working Principle For Qilian electric heat conduction oil furnace (also known as heat conduction oil heater), the electric heater is directly inserted into the organic carrier (heat conduction oil) for direct heating. A circulating pump is used to create liquid-phase circulation of heat conduction oil, thus, to transfer the heat to one or several pieces of heat using equipment. After unloaded in the heat using equipment, the heat conduction oil will return to the heater via the circulating pump, again to absorb heat, and transfer the heat to the heat using equipment. This process is repeated again and again, realizing continuous transfer of heat. As a result, the temperature of objects being heated rises, and heating requirements are fulfilled. Composition Qilian electric heat conduction oil furnace system is composed of an explosion-proof electric heater, an organic heat carrier furnace, a heat exchanger (configurable), a control cabinet, a hot oil pump, and an expansion slot. The user only needs to connect the equipment to a power supply, and arrange medium inlet and outlet pipes and electrical interfaces before use. Application Scope Qilian electric heat conduction oil furnace adopts a digital display temperature controller, and has functions of over temperature alarm, low oil level alarm and over pressure alarm. This product is a type of high-efficiency energy-saving heating equipment for chemical, petroleum, machinery, printing and dyeing, foodstuff, marine, textile, and film industry, etc. Characteristics 1. Low Operating Pressure Liquid phase heat transfer can reach a higher operating temperature under lower operating pressure; saturated vapor pressure of heat carrier is 70 to 80 times lower than that of water; and its general operating pressure is 0.3mp 2. High Heating Temperature Heating temperature of the electric heat conduction oil furnace may reach 280heating-up temperature is automatically controlled, realizing high sensitivity and stable heat supply. 3. Safe and Reliable Our electric heat conduction oil furnace is equipped with a perfect operating control and safety monitoring device, so it is easy to operate, safe, and reliable. 4. Environmental Friendly Design The electric heat conduction oil furnace is a new type of electric heating system. Electricity is used instead of coal, which reduces investment outlay and is free from contamination; meanwhile, heat conduction oil furnace, with short heating time and high thermal efficiency, is more efficient and economical.
Supplier: Furnace Oil, and Other Industrial Materials.
Buyer: Furnace Oil.
Description The vacuum oil quenching furnace is suitable for vacuum oil quenching of materials like alloy steel, bearing steel, spring steel, die steel, high-speed steel, etc. Horizontal twin chamber oil quenching furnace can also applied to aging and gas cooling process for the above materials. Technical Features 1. Excellent temperature uniformity realized by octagon-shaped furnace hearth. 2. The heating elements adopt unique non-ceramic supporting technology. It can be used for five years without any insulation problem. 3. The inner trolley is overlap type stretchable structure with frequency converting function. It has a stable transportation speed with "full-fast-slow steps, which makes the transportation time very short. 4. Build-in heat exchanger and forced gas cooling type contribute to the uniformed and high-low-rating jet gas, which eventually makes the cooling speed very fast. 5. Auto load cart, remote control, loading and unloading need only one operator. 6. High volume oil tank and hot oil cooling by external circulation and heat exchanger, achieving has a better cooling effect. 7. Two cooling types -- oil stirring and oil injection cooling, are used for various kinds of products, which makes the product have less deformation. 8. The horizontal twin chamber heat treatment furnace features larger load capacity and higher efficiency comparing with other same specification products. Optional Configuration of Vacuum Oil Quenching Furnace 1. Furnace door: On-line/off-line, vertical up and down, rotating 2. Insulation gate in the middle: Mechanically-driven/pneumatically-driven 3. Quenching oil flow type: Paddle stirring/nozzle jetting/both of the two types 4. Furnace hearth: Graphite heating elements and graphite felt heat insulation/Nichrome heating elements and stainless steel heat insulation/Molybdenum heating elements and metal heat insulation ã?? 5. Gas cooling type: build-in heat exchanger/external heat exchanger/none 6. Vacuum pump and gauge: Foreign brand/high-quality Chinese brand 7. Vacuum degree: High vacuum/medium vacuum 8. PLC: OMRON/Siemens/Mitsubishi 9. Temperature controller: SHIMADEN/EUROTHERM/Honeywell 10. Thermocouple: S type, K type, N type 11. Recorder: Paperless recorder/paper recorder 12. HMI: Simulation screen/Touch screen 13. Electric components: High-quality domestic brand/Schneider/Siemens
Supplier: Iron Ore, Furnace Oil.
Services: Transportation, Exports And Imports.
Supplier: Furnace oil
Supplier: Furnace oil
Supplier: Furnace oil
