The traditional method of radiographic inspection for weld of oil and gas pipeline is to use radiographic source and film for transmission. However, with the improvement of quality control efficiency by the construction party, the method of film imaging can not meet the requirements of customers for efficiency. In addition, the film also has some problems, such as image processing, poor preservation, environmental pollution and so on. Based on this situation, HATATEST independently developed the PT360 pipeline weld DR automatic detection system. HATATEST Automatic DR Detection System for Pipeline Weld-PT360 is a kind of Automatic DR Detection robot who is similar with Transcan system in Russia, But HATATEST Automatic DR Detection System for Pipeline Weld-PT360 as the following highlights comparing with Russian Transcan : -- Aluminum alloy chain spider, light and easy to carry -- 400-1219 mm, any caliber can be used -- Battery drive, maximum working time 12 hours -- Software control (start and stop can be controlled manually by software, or automatic start and stop can be set) -- Single-arm or double-wall transillumination -- The whole installation process only takes 2 minutes -- Real time imaging, greatly improved detection efficient -- Image quality ISO 17636-2 Class B -- Adjust the fixed device of the radiation source according to the customer's requirements, and match different radio sources
icon ZB045075085-00 side workbench 450*750*850 *1 set worktop 450*750*T *1 piece FSRA02-045083L single drawer single door floor cabinet 450*550*830 *1 pcs accessories ME01006ZE0 five-pin multifunctional power socket 86type 10A250V *2 pcs FXRB02-021010B steel single triangle tank 210*100*100 *1 pcs accessories installation at site FLRA01-0170830 steel side sealed plate 175*830*20 * 2piece
icon ZB100075085-00 side sink workbench 1000*750*850 *1set worktop 1000*750*T *1piece FGRA00-100781W C type side table steel frame 1000*725*810 *1set FSTC24-1000600 steel double door sink suspend cabinet 1000*500*600*1pcs accessories SAN-8101G PP drip rack 401*117*555 *1pcs SAN-21314A three way faucet *1pcs UF000000 water proof plate 1000*100*T *1pcs SAN-5101B PP sink 550*450*310 *1pcs SAN-5300 water drain *1pcs SAN-5301B bottle trap *1pcs SAN-7101 eye washer *1pcs FLRA01-0110750 steel side sealed plate 110*750*20 *2piece
desk type fume hood 1500*850*2330 *1 set desk type fume hood (top cabinet) 1500*850*1500 *1 set worktop 1258*705*20/25 *1 piece inner embedded door storage cabinet (bottom cabinet) 750*500*830 *2 pcs accessories wall type water supply faucet 1set wall type gas supply faucet 1 set five hole socket 220V 4 pcs cup sink 1 set inner embedded door bottom cabinet layer plate 745*440*18 2 piece fume hood bottom cabinet side sealed plate 285*830*18 2 piece
We supply a comprehensive range of sizes and types of Flip off caps and seals to suit the customers requirements. These flip off caps come pre-assembled, ready to crimp on serum vials. The plastic flip top vial caps are easily flipped off to expose the underlying aluminum seal and centre exposed rubber stopper. Available Sizes : 13mm, 20mm , 28mm ,32mm and 34mm with Printed/ Plain autoclave aluminum seal. We can also provide Flip top seals with clients Company Logo embossed on the plastic flip
The wide range of tear off seals has become the leading choice world wide as they are convenient and safe to use. We manufacture tear off seals as per customer specification and requirements, as it varies from customer to customer Available Sizes: 8mm, 13mm, 20mm, 32mm with Printed/ Plain/colored Embossed autoclave aluminum seal.
GPB has developed patented eco-friendly solutions for washing Fruits and Vegetables. When diluted in water, our product is used for the removal of harmful toxic chemicals, pesticides, fungicides, insecticides along with dirt, dust, mud, soils that are present on them in excessive amounts. Fruits and Vegetables are rich sources of nutrition having a host of micro-organisms including wide range pathogens, fungus, yeasts, and germs that thrive on their surface during transportation and storage. Our product acts as a strong anti-microbial and anti-fungal agent, completely eliminating micro-organisms and fungus from the Fruits, Vegetables, and Seedlings making it safe for processing and consumption. Volume:- 50 ml, 100 ml, 200 ml Certified and Approved:- For ORGANIC under NPOP (National Programme for Organic Production) by GreenCert APEDA FSSAI NABL Accredited International Laboratories NON-TOXIC Ingredients:- Biosurfactants, Herbal Oil, Organic Glycerol, Natural Salts, Purified Water How to Use:- Take 1liter tap water. Add 2 cap (10ml) of Evergreen in it Dip Fruits, Vegetables and mix for 1-2 minutes Drain and use directly!
Walk-in Room Available Constant Temperature and Humidity Test chamber Applicable range Walk-in Room Available Constant Temperature and Humidity Test chamber are applicable for testing the performance indexes of aeronautic & astronautic products,ships,weapon, accdemies, motorcycle, information electronics,instruments & meters, materials, electronic engineering, electronic products, various electronic elements, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, materials, plastics, medical and so on in high-low temperature and humidity alternation environment. Features(Walk-in Room Available Constant Temperature and Humidity Test chamber)
Technical Specifications Capacity ------------------------2kg/Batch Batch site----------------------------------------------100gm to 2kg. Power-----------------3200Watt Power Source ---Electric connection 220v 1 phase.
Tray thermal extension test apparatus Aging Testing Instrument I. Product introduction: Test standard: It is in line with Standard GB/T2951-2008 and Standard GB5013-2008, and it shall be used together with aging test chamber. II. Key parameters: Maximum number of samples in a test:3 1, temperature setting: rubber products, 180 , crosslinked polyethylene products 200 . 2. When the temperature rises to the required temperature, clamp the dumbbell test piece onto the hot extension clamping device, and add the weight below. 3. Weight distribution calculation: 20.4 x specimen thickness * 4(including clamps, supporting rods and weights). 4, in the middle of the dumbbell specimens on the effective distance of 20 mm (the length of the small dumbbell specimen is 10 mm) tag line, the length of the dumbbell to take three, put hot stretch of a complete set of equipment in have ascended to the temperature of the central part of the aging box. Close the door of the aging chamber and read the elongation of the specimen after 15 minutes. We are Cable Detection Equipment Factory
30ml screw-thread storage vial, clear 27.5*75mm USP 1
40ml screw-thread storage vial, clear 27.5*95mm USP 1
Filter Membrane, 13mm, 0.22um, Nylon 400pcs/pack
IPX3 IPX4 Water spray ingress test chamber is installed with oscillating tubes to spray water onto products by following IEC60529 standard, it tests and evaluates the protection degree provided by the products outer shell, this identified protection level against water ingress is called IP code. .Interior chamber made by stainless steel sus#304 .Large observation window to monitor test status .180° Oscillating tube and 360° spinner handle as water spraying device .Rotating turntable
UV-Lamp Weathering Test Chamber takes fluorescent UV lamps as light source to simulate the UV irradiation in natural light and condensation to conduct accelerated weathering test on the materials, It simulates UV, rain, high temperature, humidity, condensation, darkness and other environmental conditions, combine them together, and carry them out automatically.
Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc. Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard. .Suit IP5X and IP6X test .Interior chamber made by SUS304 stainless steel. .Exterior material is steel plate with protective coating. .Dust re-cycle blowing by circulating pump. .Dust collection section is located on bottom of test chamber. .A heater fixed into test chamber to keep dust dry. .A viewing window with a manually controlled wiper. .Programmable color display touch screen controller which located on right side of chamber. .The air velocity for the blowing of dust is controlled by a dust blowing mechanism that includes a motor and blower combination. .A stainless steel shelf for placing test specimens. .Chamber inside equipped with power interface for test specimen .Lighting in test chamber .Vacuum system for specimen .Bottom install 4 castors for ease moving, and with brakes function .Safety protection Working principle
Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc. Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard.
IPX3 IPX4 Water spray ingress test chamber is installed with oscillating tubes to spray water onto products by following IEC60529 standard, it tests and evaluates the protection degree provided by the products outer shell, this identified protection level against water ingress is called IP code.
Water ingress protection test chambers test and evaluate the protection degree provided by a product enclosure. the protection level against water ingress is called IP code,IPX5 IPX6 Water Jetting test chamber adopts a nozzle spraying water (IPX5:Ф6.3mm, IPX6:Ф12.5mm) against enclosure from every direction which should have no harmful effects, Symor strictly follows IEC60529 standard.
Water ingress protection test chambers test and evaluate the protection degree provided by a product enclosure. the protection level against water ingress is called IP code,IPX5 IPX6 Water Jetting test chamber adopts a nozzle spraying water (IPX5:Ф6.3mm, IPX6:Ф12.5mm) against enclosure from every direction which should have no harmful effects, Symor strictly follows IEC60529 standard.V
