Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc.
Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard.
IP5X IP6X Sand and Dust IP Test Chambers are capable of 800 liters,1000 liters, 1500 liters and 2000 liters. Considering that some specimens are smaller and less, so we designed and produced small dust chambers and larger dust ingress test chambers. Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seals. Dust ingress test methods included IEC60529, ISO20653, and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.
Sand and Dust chamber are designed to test the product resistance under extreme dust conditions. We are the supplier of custom build sand test chamber, JSS 55555, IEC 60529, SAE J575 and JIS 0207 dust models in the automotive & electronics industries
Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc. Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard. .Suit IP5X and IP6X test .Interior chamber made by SUS304 stainless steel. .Exterior material is steel plate with protective coating. .Dust re-cycle blowing by circulating pump. .Dust collection section is located on bottom of test chamber. .A heater fixed into test chamber to keep dust dry. .A viewing window with a manually controlled wiper. .Programmable color display touch screen controller which located on right side of chamber. .The air velocity for the blowing of dust is controlled by a dust blowing mechanism that includes a motor and blower combination. .A stainless steel shelf for placing test specimens. .Chamber inside equipped with power interface for test specimen .Lighting in test chamber .Vacuum system for specimen .Bottom install 4 castors for ease moving, and with brakes function .Safety protection Working principle
ASTM B117 chamber JOEO dust sand test chamber dust proof chamber is made for the simulation of dust and sand conditions. These sand and dust chamber used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control. Blowing sand and dust test chamber door attached to the window, the door to the lower part of the electrical control area,Simulated sand dust of talc in the lower hopper of the test chamber. Use the of circulating fan and automatic jar will be blown into the upper network studio talcum powder through a 75 micron square hole,The test space form high density dust shape, test specimen.
Larger series sand and dust test chambers allow for large and more quantity specimens, a capacity of 1500 liters and 2000 liters as standard. Great for laboratories and large industrial products. Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal. Dust ingress test methods included IEC60529, ISO20653, MIL-STD-810G, and many others. The airflow circulates upward from the bottom, blowing the dust circulation, forcing dust around the specimens. All models are upgraded to programmable controller and Ethernet access that provides simple operation and control.
I. Application 1.1 Dust-proof test box is designed and manufactured according to GB4208-93 (equivalent to IEC60529-2001) "Shell Protection Grade (IP Code)" and is suitable for sand and dust test of electrical products with the first characteristic digits of 5 and 6 (IPX5 and IPX6). 1.2 The test chamber can provide non-laminar vertical circulating airflow of dust, which can be controlled regularly. It is equipped with a vacuum pump to pump air into the outer shell of the tested product, and it can adjust the pumping volume and pressure difference.In addition,the air temperature control device is installed in the chamber to ensure that the test is carried out under the standard environmental conditions. 1.3 According to the standard requirements, this test chamber adopts the artificial analogy dust environment to test the dust-proof ability of the tested products, and its specific requirements and eligibility criteria should be in accordance with GB4208-93 (IEC60529-2001) or product-related standards. 2. Structure and Material Material: both inside and outside gallbladder adopt SUS high grade stainless steel plate door: tempered glass door. Sample outlet: dust-proof socket Controller: programmable controller (the controller has the following arbitrary setting control functions). A. Dust blowing time (stop and blow) h/m/s adjustable B. Cycle: arbitrary adjustable C. Preset test time: 0s to 999h99m99s arbitrary adjustable D. Power on: break through break Metal screen size: nominal diameter 50 um, nominal distance between lines 75 um Blower: all plastic centrifugal fan Vacuum system: equipped with pressure gauge, air filter, pressure regulating triple parts, connecting pipe (vacuum pump with another, when ordering instructions) Remarks: The test box can meet the requirements of protection grade test for household appliances, low-voltage appliances, automobile and motorcycle parts in GB2423, GB4706, GB4208, DIN. The device can not meet the sand and dust test in GJB150.
Model Number: L-BATH series Function: For testing small, middle, large sized battery Volume: 30L 1500L Temperature range:-70 180 C Humidity range: 20%RH~98%RH Hazard Level: Designed to meet the safety functions of EUCAR hazard level up to 6. Standards: Battery Test Chambers meet IEC, UL and a variety of other battery test specifications. Equipped with safety functions that protect again fire and bursting of the battery, including a Magnetic lock, pressure relief vent, forced exhaust and fire extinguisher.
Model Number: L-HH series Function: Temperature, High humidity Volume: 100L ~ 1500L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH Main test points: 85%RH @ 85 °C, 90%RH @ 60 °C
Model Number: L-BT series Function: Temperature, humidity Volume: 40L ~ 64L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH
