UV-Lamp Weathering Test Chamber takes fluorescent UV lamps as light source to simulate the UV irradiation in natural light and condensation to conduct accelerated weathering test on the materials, It simulates UV, rain, high temperature, humidity, condensation, darkness and other environmental conditions, combine them together, and carry them out automatically.
UV accelerated aging test chamber can simulate environmental conditions such as self-climate ultraviolet rays, rain, high temperature, high humidity, dew condensation, darkness, etc. By reproducing these conditions, it is merged into a cycle, and it automatically executes the number of cycles completed. In this process, the equipment can be used for automatic monitoring of blackboard temperature and water tank temperature; by configuring irradiance measurement and control device (optional), the irradiance can be measured and controlled, and the irradiance is stable at 0.76W/m2/340nm or specified setting. Fixed value, greatly extending the service life of lamps.
4. Performance specifications 1. Temperature range: RT+40 -70 2. Humidity range: 90% RH 3. Temperature control accuracy: ± 3 *Note: The performance guarantee of item # 5 above requires testing at a distance of 1/6 of each wall surface in the testing area, and must be measured after stabilizing with temperature and humidity for 30 minutes 4. Equipment placement space: at least 207 two hundred and seven 201cm (W H D) 5. Power supply: AC220V 50HZ 5 System structure 1. Heating system: Scaled stainless steel electric heating tube 2. Humidification system: glass nozzle 3. Temperature sensing system: Made of stainless steel SUR304Pt100 4. Control system: The control system adopts a P.I.D controller, which controls temperature and humidity simultaneously a. Controller specification: Accuracy: Temperature ± 2.0 +1 digit, with upper and lower limit standby and alarm functions 5. Box material Inner box material: SUS # 304 mirror stainless steel plate Outer box material: SUS # 304 stainless steel plate
Xenon Water-Cooling Aging Test Chamber UV Aging Test Chamber Ozone Aging Chamber Xenon Water-Cooling Aging Test Chamber,is designed to simulate full sunlight spectrum to produce destructive effect on material. The chamber cansimulates the light, temperature, rainfall (spray) and condensing (humidity), ismainly used to test aging resistance of products or spare parts affected by natural environment, it tests the material aging-resistant performance in sunlight, rain, temperature and humidity, you canknow the products quality at a very short time, such as the depigmentation, transmissivity, gloss, peeling, hard, softening. Specifications: Xenon arctest chamber 1. We are manufacturer, offer best price for you. 2. Major parts adopt imported brands. 3. LCD touch screen controller, easy operation. 4. Free parts warranty for 12 months. Features: 1. Equipped with black-board temperature meter to adjust temperature inside the chamber. 2. Xenon lighting time control. 3. Spraying period control. 4. Water recycling. 5. Automatic constancy of water temperature (cooling of recycling water) 6. Spraying, lighting, temperature, humidity and rotating platform can be controlled separately. 7. Equipped with viewing window. 8. Water shortage / over-temperature alarm. 9. Equipped with irradiance meter to show current light intensity inside the chamber. 10.LCD Touch Screen Controller, programmable of temperature, moisture, sun and rain 11.Humidity: 50-98%RH 12.Temperature: RT to 80C(-20 to 80C as option) 13.Blackboard Temperature: 55-100C 14.Light Source: Xenon Lamp 15.Spray Nozzle: 2mm
Walk in xenon lamp aging test chamber,xenon test chamber,xenon arc test chamber,Walk in xenon chamber,xenon light fastness tester adopts xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, which can provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control, xenon lamp test, also known as the "solar radiation protection test," is divided into three types based on test standards and methods. Air cooled xenon lamp (LP/SN-500), water cooled xenon lamp (LP/SN-500), and desk xenon lamp (TXE) are indispensable testing instruments in the aging test chamber series. JOEO xenon arc chamber,light fastness testing machine,xenon arc lamp aging test chamber is mainly used in automobiles, coatings, rubber, plastics, pigments, adhesives, fabrics, aerospace.
Product introduction: HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability of electronic components and other materials under high temperatures and humidity. A HAST test chamber is a device that provides controlled conditions of high temperature and humidity to simulate the effects of aging and degradation on materials over a shorter period of time than would occur in normal use. During testing, the sample to be evaluated is placed in the HAST chamber, which is then heated to a high temperature and subjected to a high-pressure steam environment. The temperature and humidity levels are carefully controlled to ensure that the sample is subjected to the appropriate conditions. The purpose of the HAST test is to identify any weaknesses or defects in the material that may cause it to fail prematurely in real-world use. By exposing the sample to accelerated aging conditions, engineers can evaluate the long-term reliability of the material and make any necessary improvements to its design. HAST test chambers are commonly used in the development and testing of electronic components, such as integrated circuits, printed circuit boards, and semiconductor devices. They are also used in other industries where materials must be able to withstand harsh environmental conditions, such as the aerospace, automotive, and medical device industries.
Model Number: L-BATH series Function: For testing small, middle, large sized battery Volume: 30L 1500L Temperature range:-70 180 C Humidity range: 20%RH~98%RH Hazard Level: Designed to meet the safety functions of EUCAR hazard level up to 6. Standards: Battery Test Chambers meet IEC, UL and a variety of other battery test specifications. Equipped with safety functions that protect again fire and bursting of the battery, including a Magnetic lock, pressure relief vent, forced exhaust and fire extinguisher.
Model Number: L-HH series Function: Temperature, High humidity Volume: 100L ~ 1500L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH Main test points: 85%RH @ 85 °C, 90%RH @ 60 °C
Model Number: L-BT series Function: Temperature, humidity Volume: 40L ~ 64L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH
Envisys Technologies are Environmental Test Chambers Manufacturers that are designed to simulate a wide range of temperature, relative humidity etc., and conditions without the added cost of expensive add-ons as options. The Environmental Test Chambers come with special features including multi-pane vacuumed glass view window, de-fog heaters, high grade SS interiors & CRCS powder coated panels and more.
