Caustic soda flakes 99.50% (naoh)
Features
High purity caustic soda
Free flowing white deliquescent pieces
Specifications
Sr. Characteristics specification
1. Sodium hydroxide (as naoh)
Dry basis % 99.50 min
2. Sodium carbonate (as na2co3)____%____00.40 max
3. Chloride (nacl) % 00.10 max
4. Iron (as fe+++) ppm 20.00 max
Caustic soda prills / pearls 99.3% (naoh)
Features
Ultra high purity caustic soda
Free flowing milky white granules
Specially packed under completely dry and air conditioned climate
Specifications
Sr. Characteristic specifications
1. Sodium hydroxide (as naoh)
On dry basis % 99.30 min
2.Sodium carbonate (as na2co3)_% 00.60 max
3.Chloride (as nacl)%00.10 max
4.Irons (as fe+++) ppm 10.00 max
5.Nickle (as ni) ppm__05.00 max
6.Particle size (nominal) mm__0.7 to 1.1
Caustic soda lye 47% (naoh)
Features
Mercury free
Specifications
Sr. Characteristic specifications
1. Sodium hydroxide (as naoh)____%__47.00 min
2. Sodium carbonate (as na2co3)__%__00.40 max
3. Sodium chlorides (nacl) %__00.10 max
100% basis
4.___iron(as fe+++)on 100% basis____ppm_20.00 max
Applications
Major consuming industries :
* pulp & paper
* textiles
* soaps and detergents
* petroleum products
* aluminum metal
* chemical process
* bleach manufacturing.
Sr. No.Characteristics Assured Values
1.Appearance Colourless crystals or White Powder, Odorless
2.Solubility100 mg soluble in 1 ml of water
3.Alkalinity No Colour is produced on addition of a drop of phenolphthalein solution.
4.Arsenic 0.0001% max
5.Heavy Metals 0.0002 % max
6.Barium 0.001 % max
7.Chloride & Bromide 0.001 % max
8.Iodate 0.0002 % max
9.Sulphate 0.0025 % max
10Loss on drying1.0% w/w max. at 105º C for 3hrs
11Assay99.0% w/w min. of KI on dried basis
Product Name : Calcium Hydroxide (Hydrated Lime)
Chemical Name : Ca(OH)2
Purity : 90.0% Min.
Specifications
Sr._____Characteristics___________Specifications
1.___Calcium Hydroxide -Ca(OH)2_________90 % min
2.___Calcium Oxide –CaO_________________+68%
3.___Calcium Carbonate – CaCO3__________2%
4.___Magnesium Oxide - MgO______________0.4%
5.___Acid Insoluble - SiO2______________0.4%
6.___Alumina, Iron, Chlorides___________Traces
7.___Moisture___________________________0.5%
8.___Mesh_______________________________250
9.___Colour_____________________________Snow white.
Uses
A flocculant, in water and sewage treatment and improvement of acid soils
An ingredient in whitewash, mortar, and plaster
An alkali used as a lye substitute in no-lye hair relaxers
A chemical depilatory agent found in Nair
A calcium supplement in mineral fortified baby formulas.
Packing : 30kg / 35 kg / 40 kg Laminated HDPE bags.
Stuffing : 18 - 19 mt per 20’ FCL.
Product Name : Poly Aluminium Chloride
Chemical Name : (Aln(OH)mCl3m-n)x
Specifications
Sr._________Characteristics__________specifications
_______________________________MB__________HB
1.___Appearance_________Pale yellow Powder_Pale yellow Powder
2.___Aluminium as Al2O3___29.0% ± 1.0%_____29.0% ± 1.0%
3.___Basicity_____________40.00% ± 5.0%___64% (Min)4.___Chloride as Cl________31.00% ± 2.0%___29.00% ± 2.0%
5.___Sulphate as SO4 (Max)_10%___________10%
6.___Bulk Density__________0.65Gm/ml Min___0.65Gm/ml Min
7.___Insolubles (Max)_______1.5%__________1.5%
8.___pH of 5% Solution______2.5 - 4.5w/v____2.5 - 4.5w/v
USES :
• Municipal & Industrial Potable Water treatments
• Municipal & Industrial Waste Water treatments
• Sewage Water treatments
• Separation of slurry in Industrial processes
• Sizing in Paper & Pulp Industry
• Decolorisation & Decontamination of dyes in Textile Industry
Name of Product - Ammonium Para Molybdate
Synonyms - Ammonium Molybdate, Ammonium Hepta Molybdate
Molecular Formula - (NH4)6 Mo7 O24. 4H2O
Assay - 98 to 101 %
Mo Content - 53.5 to 55 %
MoO3 Content – 80 to 82.5 %
_______CHARACTERISTICS__________________SPECIFICATIONS
Status______________________________Crystalline
Colour_______________________________White
Solubility_____________________________Water Soluble
pH of 5 % soln________________________7 to 7.5
Water insolubles_______________________0.05 % max.
Phosphates___________________________0.005 % max.
Arsanates____________________________0.005 % max.
Lead________________________________0.005 % max.
Loss on drying________________________NA
Product Name :Dextrose Monohydrate
Sr. Characteristics Specifications
1.___Physical Appearance__________White Crystalline Powder, free from visible specks, added colours ; odourless.
2.___Identification test__________Reduces Fehling solution on boiling
3.___Solubility___________________Freely soluble in water, easily soluble in boiling water & alcohol.
4.___Clarity 50% w/v Solution_____Clear
5.___Loss on drying (% w/w)_______7.00 - 9.00 %
6.___Sulphated Ash (% on DB )_____0.1 % Max.
7.___Specific Volume(packed)______135 - 155 ml/100gm
8.___Acidity (ml of 0.02N NaoH / 5gms)_1.25 ml Max
9.___Specific optical Rotation at 20oC ( 10% w/v Solution )_______+52.5o û +53.5o
10.__Sulphur Dioxide ppm._________70.0 Max.
11.__Dextrin & less soluble sugars_Absent. A clear solution is obtained which does not produce any deposition on cooling.
12.__Chlorides ppm________________100.0 Max.
13.__Sieve Analysis retention %
( 30# )_10 % Max.
Uses : Baking Industry , beverage industry & food items etc.
Packing : Packing : Normal HDPE Bags with Liner Inside at Ambient Temp.
Stuffing : 18 mt per 20ÆFCLS.
Product name : chlorinated paraffin wax (cpw)
Chemical name : cpw
Specifications
Sr.__characteristics_specifications
1.Grade_cp - 50
2.Chlorine__50%
3appearance__white to pale yellow viscous liquid
4.Ph6.0 to 6.5
5.Sp. Gravity at 25.5° c__1.280 ± 0.01
6.Heat stability at 180° c for 1 hour_colour turns to dark yellow / dark brown
7.Colour (hu)__80 max
8.Volatile loss 180° c/4 hrs__2.2% max
9.Viscocity at 27° c (poise)__18 ± 6
10.__refractive index at 27° c__1.506 ± 0.002
11.__free mineral acidity_0.001% max
12.__paraffin range__c14 - c17
Uses :
Secondary plasticiser in pvc compounding, pipes & hoses, cable compound, footwear, leather cloth
Additive in lubricating oils
Additive in special grades of paints.
Packing :
250 kgs un approved hdpe barrels.
Tanker load
Stuffing : 20 mt per 20'fcl.
Product Name : Hydrochloric Acid
Chemical Name : HCL
Purity : 1.145.
Specifications
Sr.________CHARACTERISTICS__________SPEICIFICATIONS
1.___Sp. Gravity (at 27¦C)________________1.145
2.___Hydrochloric Acid (as HCL)____________30.00% min
3.___Iron (as Fe+++)_____________________1.00 ppm max
4.___Free Chlorine & Bromine_______________0.002% max.
Uses:
Steel pickling and scale removal
Ore refining
Hydrolyzing agent
Food processing
Activation of Petroleum wells
Catalyst in Organic process
Removal of heavy metal from Carbon Black and Activated Carbon
Leaching Alumina from Crystalline Zeolities
Manufacture of Chlorine Dioxide
Water treatment.
Name of Product – Sodium Molybdate
Synonyms - Natrium Molybdate
Molecular Formula - Na2MoO4. 2H2O
Assay – 99 - 100 % min.
Mo Content – 39 to 39.7 %
MoO3 Content – 59 to 59.5 %.
CHARACTERISTICS_________________________SPECIFICATIONS
1.__Status_______________________________Crystalline
2.__Colour_______________________________White
3.__Solubility_____________________________Water Soluble
4.__pH of 5 % solution_____________________7.5 to 9
5.__Water insolubles_______________________0.05 % max.
6.__Loss on drying_________________________14.8 to 15.2 %.
Product Name : Sorbitol 70% Solution
Characteristics Specifications
Description A clean colourless viscous liquid
Taste Mild sweet
Specific gravity at 25 0 C 1.285 Min
Refractive Index at 20 0 C 1.455 to 1.465
Acidity Or *NMT 0.2 ml of 0.01 M Naoh or NMT 0.3 ml of 0.01M HCL Solution as per specified test in I.P
Reducing Sugar *NLT 12.8ml of 0.05M Sodium thiosulphate solution should be consumed as per specified test in I.P.
Optical Rotation +1.5 0 to +3.5 0
(as per specified test in I.P.)
Clarity & Colour Clear and colourless
Arsenic NMT 2 ppm
Heavy Metals NMT 10 ppm
Chloride NMT 50 ppm
Sulphate NMT 125 ppm
Nickel NMT 1 ppm
Sulphated Ash NMT 0.1% W/W
Solid Matter 68% to 72% W/W
Polyols NLT 62% W/W As D-Sorbitol
*NMT = NOT MORE THAN
Uses :
• Frozen Desserts, Soups, Suces & Gravies
• Infant Food, Salads & Food Dressing, Dairy Products, Meat Products
• Fermentation Industry, Textile Industry, Adhesive Industry, Paper Industry
• Building Industry, Leather Industry, Dyestuff Industry,
• Printing Industry, Packaging Industry, Cigarettes, Crayons, Dry Cell Batteries
Packing : 300 kgs HM HDPE Drums
Stuffing : 20±2 mt/20’ FCL
SODIUM BI SULPHITE 91.5%
SPECIFICATIONS
Sr._____CHARACTERISTICS____________SPECIFICATIONS
1___ Physical Appearance___________Creamish Crystalline Powder
2___ Assay as NaHSO3 %__________91.5%
3___ Assay as SO2% by mass_______60-62% Min.
4___ PH of 10% Solution___________3.9 to 5.0
5___ Iron Content ppm____________150 Max.
6___ Chloride content_____________600 PPM Max.
7___ Sodium Sulphate %__________7.8 Max.
8___ Heavy Metals (as pb)_________50 PPM Max.
9___ Thio Sulphate S2O3__________0.05%
10__ Sodium Sulphite_____________5% Max.
11__ Arsenic, ppm max____________NIL
12__ Selenium, ppm max.__________NIL
13__ Water insoluble______________0.05% Max.
Uses :
• Leather
• Dye intermediates
• Pollution Control
• Metal Cleaning
Packing : 25 / 50 kg HDPE Bags with liner
Stuffing : 20 mt per 20’ FCL.
Product name : Glycerin
Grade : USP
Speicifications
Sr.__________Parameter___________Speicifications (AS PER USP-24)
1.___Colour________________________To comply
2.___Identification__________________As per USP 24
3.___Specific gravity at 25/25 æc______Not less than 1.249
4.___Residue on ignition %___________Not more than 0.01
5.___Water % _____________________Not more than 0.35
6.___Chloride %___________________Not more than 0.001
7.___Sulphate %__________________Not more than 0.002
8.___Heavy metals (ppm)____________Not more than 5.0
9.___Chlorinated Compound %of Cl___Not more than 0.003
10.__Organic volatile impurities_______To comply
11.__Fatty acid & Ester____________Not more than 1.0 ml of 0.5N NaOH is consumed for 50g sample
12.__Chromatographic purity %_______Impurities are not more than 1.0
13.__Assay ( % )__________________99.50 min of C3H8O3 calculated on anhydrous basis.
Uses: cosmetics, foods, toothpaste, lubricate food handling machinery, soaps.
Specifications
Name of Product - Molybdic Anhydride
Synonyms - Molybdenum Trioxide
Molecular Formula - MoO3
Assay - 99.95 % min.
Mo Content - 66.6 % min.
MoO3 Content- 99.95 % min.
Sr. No.-Characteristics------------------Specifications
1__Status______________________Amorphous
2__Colour______________________Yellowish
3__Solubility____________________Alkali Soluble
4__pH of 5 % suspension__________7.5 - 8.5
5__Alkali insolubles_______________0.02 % max.
6__Phosphate___________________0.005 % max.
7__Arsenate____________________0.005 % max.
8__Lead________________________0.005 % max.
9__Loss on drying________________NA
Usual Packings –
• 50 kgs HDPE drum
• 25 kgs HDPE drum
Specifications
Sr. Characteristics specifications
1. Potassium Hydroxide (as KOH) dry basis_%_90.00 min
2. Potassium Carbonate (as K2CO3) % 00.50 max
3. Chlorides (as KCL) ppm 105.00 max
4. Iron (as F+++) ppm 10.00 max
Applications
• Potassium Carbonate manufacture
• Dye Stuff Industry
• Rubber Chemicals
• Potassium Permanganate manufacture
• Acid Neutralization
• Other Potassium based chemicals
• Pharmaceutical industry.
Coriander Seeds - 10 MT
Coriander Seeds Eagle
Coriander Seeds Bold Eagle 5%
Coriander Seeds Bold Eagle 2-3%
Coriander Seeds Super XO 5%
Coriander Seeds Super XO 2-3%
Coriander Seeds Double Super Xo
Coriander Seeds 100% Splits
Coriander seed-Eagle-Whole Coriander seed-Badami-Whole
Coriander seed - Split.
Product name : liquid glucose
Specification
Sr. Characteristics standards
1. Description_Colourless to Yellowish tinge, clear, thick Viscous Syrup
2. Dry Solids % at 20°C___85.00 – 86.50 (Regular Grade)
80.00 – 84.50 (As per Party requirement)
3. Sulphated ASH (% on D.B.)_0.25% max
4. Dextrose Equivalent (% on D.B.) (i) 40.00 – 45.00% (R.C.)
(ii) 31.00 – 34.00% (L.C.)
5. pH (50% Aqueous sol. w/v)_4.50 to 5.50
6. Sulpher Dioxide ppm (Conf)_400 Max.
(S.F.G.) 40 Max.
7.Acidity
(ml of 0.1 N NaOH / 5 gm)__0.6 ml max
8. Starch Test Absent (No blue colour produced with Iodine Solution)
Uses :
• Frozen Desserts, Soups, Sauces & Gravies
• Canning Industry, Beverage Industry, Infant Food
• Salads and Dressings, Dairy Products
• Fermentation Industry
• Building Industry, Surfactant, Polymers
• Cosmetics, Paint Industry, Packaging Industry, Cigarettes, Crayons
• Dry Cell Battries
• Toothpastes
Packing : 300 Kg HM HDPE Drums
Or MS Barrels
Stuffing : 24 mt (1 X 20' FCL).
Product Name : Table salt
Speicifications
Sr._______CHARACTERISTICS____________SPECIFICATIONS
1.___NaCl_________________________________99%
2.___Moisture______________________________0.25%
3.___Iodine________________________________30 PPM
4.___Particle Size___________________________150 to 850 Micron
USES :
• Diary Industry
• Food Industry
Product Name : INDUSTRIAL SALT
SPECIFICATIONS
Sr.______CHARACTERISTICS_____________SPECIFICATIONS
1.___Sodium Chloride as NaCl______________96.00% Min
2.___Moisture as H2O_____________________4.00% Max
3.___Water Soluble + Insoluble______________0.50% Max
4.___Water Insoluble______________________0.20% Max
5.___Calcium_____________________________0.15% Max
6.___Magnesium__________________________0.10% Max
USES : Industrial use.
Product name : sodium carbonate (soda ash dense)
Chemical name: na2co3
Specifications
Sr.__________characteristics_________specifications
1.___total alkalinity as na2co3_____________99.20% min
2.___chloride as nacl_____________________00.50% max
3.___matter insoluble in water______________00.01% max
4.___sulphates as na2so4_________________00.01% max
5.___iron as fe2o3_______________________0.002% max
6.___bulk density_________________________950 - 1100gpl
7.___volatile matter_______________________0.8% max
8.___particle size
______________+1.40mm__________________2.0% max
______________-0.150mm_________________2.0% max
Uses :
• Glass
• Silicate
• Ultramarine
• Bichromates
• Other industries
Packing: 50kg hdpe bag with inner liner.
Stuffing : 21mt per 20’ fcl
Product name : sodium carbonate (soda ash light)
Specifications
Sr.__________characteristics_________specifications
1.___total alkalinity as na2co3_____________99.00% min
2.___chloride as nacl_____________________00.80% max
3.___matter insoluble in water______________00.01% max
4.___sulphates as na2so4_________________00.01% max
5.___iron as fe2o3_______________________0.002% max
6.___bulk density_________________________600 - 700 gpl
7.___volatile matter_______________________1.0% max
Uses : Manufacturing of :
• Detergents
• Sodium silicates
• Bicarbonates
• Bichromates
• Pulp & paper
• Cellulose and rayon
• Iron and steel
• Aluminium
• Cleaning compounds
• Water softening chemicals
• Textiles and dyestuffs
• Drugs, etc.
Packing : 50 kg hdpe bag with inner liner.
Product name : maize starch (food grade)
Specifications
Sr.________characteristics___________standards
1.___solubility_______________________practically insoluble in cold water.
2.___moisture (% w/w)_______________11.00 % max.
3.___protein (% on d.B.)______________0.50 % max
4.___hydrolysable (% on db)___________98.0 % min.
5.___petroleum hydrocarbons
_____extractable matter (% on db)_____0.25 % max.
6.___sulphated ash__________________0.25 % max
7.___free acidity
_____(ml of 0.1 n naoh /100 gm)_______40 ml max.
8.___cold water soluble(% on db)_______1.00 max
9.___ph (10 % aqueous sol.)___________4.50 to 7.00
10.__oxidizing substance______________no distinct brown or blue colour is observed.
11.__visible foreign & black particles.____10 max.
12.__sulpher dioxide (ppm)____________80 ppm max.
13.__fluorescence test_______________no fluorescence should be under uv. Light.
14.__%sieve retention on 100 # (mesh)_1.00 % max
15.__description_____________________fine white powder, odourless, free from adulterants, fermented smell, musty dirt & extraneous matter.
Uses
• Salads and dressings, meat products
• Fermentation industry
• Surfactant, tobacco industry, leather industry
• Paint industry, dyestuff industry, printing industry
• Toothpastes, packaging industry, cigarettes, crayons
