Differences between Spray Paint and Electrostatic Powder Coating:
1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes.
2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns.
3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health.
4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius.
5. The same grade of Powder is cheaper than lacquer.
6. The strength of the powder is better than the ordinary paint.
7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost. Hebei Hanna technology CO., LTD. 's Fast Automatic Powder Color Changing System can change color rapidly for 15 minutes. It saves manpower and time. This is really good for you if you have more color on your workpiece to change. And the Big Cyclone can achieve 99.2% recovery. It's economical and environmentally friendly.
Powder coating system transport component:According to its size to determine the length and width of the workpiece.Different lever powder coating system are avilable for you to choose according to your products and your budget.
Powder coating system transport component:According to its size to determine the length and width of the workpiece.Different lever powder coating system are avilable for you to choose according to your products and your budget.
The characteristics of curing heating systems:
(1) high running cost is the highest consumption in heating system.
(2) the heating element in the heating system occupies a larger space in the solidified oven, and the volume of the same size can be reduced, and the width becomes smaller.
(3) the workpiece must keep a certain distance from the electric heating element, otherwise the local temperature will cause the color difference too high, which further reduces the available space in the curing furnace.
Working principle: the powder center will transfer the powder from the hose to the spray gun and be sprayed onto the workpiece by electrostatic spraying in the air. The two - dimensional elevator controls the upper and lower parts of the spray gun to complete the powder spraying more efficiently. 30 to 40% of the powder in the spray chamber is ejected by the spray gun and is adsorbed on the surface of the workpiece surface for surface treatment under the action of static electricity. The remaining 60-70% fall into the lower grooves and are sucked into the wind by the fan and sent back through the hose to the powder center for reuse. A small fraction of the powder is absorbed by the powder recovery equipment and the ordinary powder falls into the powder keg and uses it to complete the secondary recovery. Tiny particles can be expelled in the wind.
Powder Coating Plant mainly includes:Pretreatment System,Powder Coating System,Drying Room,Heat Source System,Electric Control System,Suspended Conveyor Chain and The Large Cyclone.
Do you want to customize your own powder coating equipment? Still in the plant too big or too small to suit your own powder coating equipment and trouble? Look at me! We have the best tailor-made powder spraying equipment. We will design the most suitable powder coating equipment for your products and plant.
HeBei hanna powder coating equipment co.,LTD is a leading supplier in the area of electrostatic powder coating with a worldwide presence.Our company has been producing powder coating equipment since 1990.One of the china's largest powder coating equipment manufacturing plant.From simple hand coating through to fully automated powder coating, Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.Different level powder coating system are available for you to choose according to your product and you budget.
Compared with the traditional painting process, the electrostatic spraying process has a significant advantage. It does not require diluent. The coating has excellent appearance quality, strong adhesion and mechanical strength. Spraying construction curing time is short; The corrosion resistance of coating is much higher. No primer required; Simple construction, low technical requirements for workers; The cost is lower than the painting process; Some construction sites have made it clear that the electrostatic spraying process must be used. In the process of electrostatic powder spraying, there will be no common flowing phenomenon in the process of spray painting.
Powder Coating Plant Cost
Powder Coating Plant mainly includes:Electrostatic spraying machine,Electrostatic spraying gun,Automatic elevating equipment,Quick change of color powder room,Powder recovery equipment,Multi-function spray room,Spray paint room, Telescopic spray paint room,Pretreatment equipment, spray, Hot air furnace, Biological granule combustion machine, Gas burner, Electric heating oven, Curing oven, Chain suspension conveying equipment, etc .Different level Powder Coating System are available for you to choose according to you produces and your budget.
Do you want to customize your own powder coating equipment? Still in the plant too big or too small to suit your own powder coating equipment and trouble? Look at me! We have the best tailor-made powder spraying equipment. We will design the most suitable powder coating equipment for your products and plant.
HeBei hanna powder coating equipment co.,LTD is a leading supplier in the area of electrostatic powder coating with a worldwide presence.Our company has been producing powder coating equipment since 1990.One of the china's largest powder coating equipment manufacturing plant.From simple hand coating through to fully automated powder coating, Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.Different level powder coating system are available for you to choose according to your product and you budget.
When purchasing an electrostatic powder coating device, the following points should be considered:
1.the performance of the equipment, for the electrostatic dusting equipment is mainly the powder rate, powder capacity, the ability to process complex workpieces, this indicator is difficult to understand the first contact friends, we must carefully understand
2. The stability of equipment quality. The working environment of industrial processing equipment is not better than that of home appliances. Sometimes the environment is very poor, and often the work is continuous for a long time. The stability of the equipment is very important.
3.technical services and after-sales service, many customers need to have rich experience in the production of technical experts to guide the smooth mastery of electrostatic powder (electrostatic spray technology), and the general equipment sales clerk far can not meet such requirements , can only be taught to customers how to use.
Curing Heating System:heating fuel can be divided into coal,electricity,natual gas,diessl oil,biological particles and so on.After powder coating,the workpieceis heated into the curing heating system at 180-200 degree by the converying chain,and it is heated for the corresponding time about 15-20 minutes to melt.
Do you want to customize your own powder coating equipment? Still in the plant too big or too small to suit your own powder coating equipment and trouble? Look at me! We have the best tailor-made powder spraying equipment. We will design the most suitable powder coating equipment for your products and plant.
HeBei hanna powder coating equipment co.,LTD is a leading supplier in the area of electrostatic powder coating with a worldwide presence.Our company has been producing powder coating equipment since 1990.One of the china's largest powder coating equipment manufacturing plant.From simple hand coating through to fully automated powder coating, Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.Different level powder coating system are available for you to choose according to your product and you budget.
Spraying robot, also known as spray painting robot, is an industrial robot that can automatically spray paint or spray other coatings. General workpieces such as metal workpieces or plastic workpieces will be sprayed surface to finish the surface treatment. Common surface spraying methods include Spray Paint and Electrostatic Powder Coating. Do you know the difference between Spray Paint and Electrostatic Powder Coating?
Differences between Spray Paint and Electrostatic Powder Coating:
1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes.
2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns.
3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health.
4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius.
5. The same grade of Powder is cheaper than lacquer.
6. The strength of the powder is better than the ordinary paint.
7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost
HeBei Hanna Powder Coating Equipment co.,LTD is a leading supplier in the area of Electrostatic Powder Coating with a worldwide presence.Our company has been producing Powder Coating Equipment since 1990.One of the china's largest Powder Coating Equipment Manufacturing Plant.From simple hand coating through to Fully Automated Powder Coating. Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.
Automatic Powder Coating Plant include:Electrostatic spraying machine,Electrostatic spraying gun,Automatic elevating equipment,Quick change of color powder room,Powder recovery equipment,Multi-function spray room,Spray paint room, Telescopic spray paint room,Pretreatment equipment, spray, Hot air furnace, biological granule combustion machine, gas burner, electric heating oven, Curing oven, Chain suspension conveying equipment, etc .
HeBei hanna powder coating equipment co.,LTD is a leading supplier in the area of electrostatic powder coating with a worldwide presence.Our company has been producing powder coating equipment since 1990.One of the china's largest powder coating equipment manufacturing plant.From simple hand coating through to fully automated powder coating, Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.Different level powder coating system are available for you to choose according to your product and you budget.
Powder Coating Plant mainly includes:Electrostatic spraying machine,Electrostatic spraying gun,Automatic elevating equipment,Quick change of color powder room,Powder recovery equipment,Multi-function spray room,Spray paint room, Telescopic spray paint room,Pretreatment equipment, spray, Hot air furnace, Biological granule combustion machine, Gas burner, Electric heating oven, Curing oven, Chain suspension conveying equipment, etc .Different level Powder Coating System are available for you to choose according to you produces and your budget.
Powder Coating Plant mainly includes:Pretreatment System,Powder Coating System,Drying Room,Heat Source System,Electric Control System,Suspended Conveyor Chain and The Large Cyclone.
Do you want to customize your own powder coating equipment? Still in the plant too big or too small to suit your own powder coating equipment and trouble? Look at me! We have the best tailor-made powder spraying equipment. We will design the most suitable powder coating equipment for your products and plant.
HeBei hanna powder coating equipment co.,LTD is a leading supplier in the area of electrostatic powder coating with a worldwide presence.Our company has been producing powder coating equipment since 1990.One of the china's largest powder coating equipment manufacturing plant.From simple hand coating through to fully automated powder coating, Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.Different level powder coating system are available for you to choose according to your product and you budget.
Do you want to customize your own powder coating equipment? Still in the plant too big or too small to suit your own powder coating equipment and trouble? Look at me! We have the best tailor-made powder spraying equipment. We will design the most suitable powder coating equipment for your products and plant.
HeBei hanna powder coating equipment co.,LTD is a leading supplier in the area of electrostatic powder coating with a worldwide presence.Our company has been producing powder coating equipment since 1990.One of the china's largest powder coating equipment manufacturing plant.From simple hand coating through to fully automated powder coating, Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.Different level powder coating system are available for you to choose according to your product and you budget.
When purchasing an electrostatic powder coating device, the following points should be considered:
1.the performance of the equipment, for the electrostatic dusting equipment is mainly the powder rate, powder capacity, the ability to process complex workpieces, this indicator is difficult to understand the first contact friends, we must carefully understand
2. The stability of equipment quality. The working environment of industrial processing equipment is not better than that of home appliances. Sometimes the environment is very poor, and often the work is continuous for a long time. The stability of the equipment is very important.
3.technical services and after-sales service, many customers need to have rich experience in the production of technical experts to guide the smooth mastery of electrostatic powder (electrostatic spray technology), and the general equipment sales clerk far can not meet such requirements , can only be taught to customers how to use.
Spraying robot, also known as spray painting robot, is an industrial robot that can automatically spray paint or spray other coatings. General workpieces such as metal workpieces or plastic workpieces will be sprayed surface to finish the surface treatment. Common surface spraying methods include Spray Paint and Electrostatic Powder Coating. Do you know the difference between Spray Paint and Electrostatic Powder Coating?
Differences between Spray Paint and Electrostatic Powder Coating:
1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes.
2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns.
3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health.
4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius.
5. The same grade of Powder is cheaper than lacquer.
6. The strength of the powder is better than the ordinary paint.
7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost.
Do you want to customize your own powder coating equipment? Still in the plant too big or too small to suit your own powder coating equipment and trouble? Look at me! We have the best tailor-made powder spraying equipment. We will design the most suitable powder coating equipment for your products and plant.
HeBei hanna powder coating equipment co.,LTD is a leading supplier in the area of electrostatic powder coating with a worldwide presence.Our company has been producing powder coating equipment since 1990.One of the china's largest powder coating equipment manufacturing plant.From simple hand coating through to fully automated powder coating, Hanna Powder Coating Equipment Technology Co.,Ltd offers solutions that meet the high demands and requirements to meet the needs and requirements of customers around the world.Different level powder coating system are available for you to choose according to your product and you budget.
Curing Heating System:heating fuel can be divided into coal,electricity,natual gas,diessl oil,biological particles and so on.After powder coating,the workpieceis heated into the curing heating system at 180-200 degree by the converying chain,and it is heated for the corresponding time about 15-20 minutes to melt.Different fuels are used for curing furnace:
1.The advantage of the curing furnace to choose coal as fuel is low cost. But few countries use it because of the pollution.
2.The solidification furnace with electric power as fuel is relatively safe and environmentally friendly.But the cost and combustion costs are relatively high.
3.The curing furnace with diesel fuel is low cost.But burning costs and pollution levels are not optimistic.
4.As the most popular burning raw material in recent years, bioparticles are highly regarded by the public.Relatively low cost and high environmental protection.It is now the first choice for most spray factories.
Will your metal products rust because of ultraviolet radiation or temperature or wet air?Give the metal a layer of protection!Powder coating is the best protective film for metal products.
Does the powder on the surface of the iron door fall off easily?It may be that your iron door is the pretreatment is not clean enough or used with a bad powder or a bad powder coating device.
We are committed to manufacturing Aluminium Window Frames Powder Coating Line,Aluminium Powder Coating Machine,Metal Cabinets Powder Coated Line,Sheet Metal Powder Coating System,Steel Storage Rack Powder Coating Line,Vertical Powder Coating Line,Steel Screen Spray Powder Coating System,Metal Door Frame Powder Coating Booth Equipment,Heavy Painting Powder Coating Line,even Small Workpiece Powder Coating Line.You don't have to worry about the powder coating of your metal products if you use our powder spraying equipment and the powder is used in normal use.
So please contact me!
