Rated Power : 30KW Shaft Power : 34.5KW Rated Wind Speed : 10m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.48 Rotor Diameter : 12m Blade Length : 5.58m Tip Chord : 230mm Max Chord : 783mm Material : FRP Weight(Kg/pcs) : 112 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 248mm
Rated Power : 50KW Shaft Power : 55KW Rated Wind Speed : 10.5m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.45. Rotor Diameter : 15.2m Blade Length : 7.2m Tip Chord : 289mm Max Chord : 979mm Material : FRP Weight(Kg/pcs) : 208. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 434mm.
Rated Power : 100KW Shaft Power : 120KW Rated Wind Speed : 12m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.43 Rotor Diameter : 19.1m Blade Length : 9.2m Tip Chord : 120mm Max Chord : 1070mm Material : FRP Weight(Kg/pcs) : 278 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 360mm.
Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Rotor diameter: 3.2m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output Power: 1000W Maximum output power: 1800W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 2450KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 8.0m/s17.8mph Storm-stand: up to 50m/s Max rotate speed: 400r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Model Fzy1kw, Rotor diameter: 2.8m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 360r/min, Rated output power: 1kw, Max output power: 1500w, Output voltage: dc24v 48v/ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 2500kwh, Recommended accumulators: 12v150ah4pcs( 600ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 45kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box
The 1kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type). It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for lighting, tv, telecommunication equipment and so on. The 1kw wind turbine is mainly composed of generator, blade, tail, hub, controller, dump loader, inverter, tower, tower base, cable , accessories . Main technical performances Rotor diameter (m): 2.8 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 1000/1500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-20 Survived wind speed: 35 Start torque (n/m): 1.5 Rated rotate speed(r/min): 500 Working voltage : dc24v /dc48v Generator style : three phase, permanent magnet, ac Charging method: constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 6/7/8/9/10 Life time: 15years Generator/blade/tail /hub 142*61*31cm 120kg Controller 49*45*31cm 16kg