Rated Power : 100KW
Shaft Power : 120KW
Rated Wind Speed : 12m/s
Cut-in Wind speed : 3m/s
Cut-out Wind speed : 25m/s
Max Cp : 0.43
Rotor Diameter : 19.1m
Blade Length : 9.2m
Tip Chord : 120mm
Max Chord : 1070mm
Material : FRP
Weight(Kg/pcs) : 278
Direction : Clockwise
Orientation : Upwind
Configuration : Horizontal
Survival Speed : 52.5m/s
Standard : AWEA/IEC
Design Life : 20years
Bolt Circle Dia : 360mm.
Supplier: Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines
Buyer: Sunflower husk pellets
Aluminum blades are durable, strong and not afraid of any external influences. At the same time, they are heavier than plastic ones and require careful wheel balancing.
Rated Power : 30KW Shaft Power : 34.5KW Rated Wind Speed : 10m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.48 Rotor Diameter : 12m Blade Length : 5.58m Tip Chord : 230mm Max Chord : 783mm Material : FRP Weight(Kg/pcs) : 112 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 248mm
Rated Power : 50KW Shaft Power : 55KW Rated Wind Speed : 10.5m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.45. Rotor Diameter : 15.2m Blade Length : 7.2m Tip Chord : 289mm Max Chord : 979mm Material : FRP Weight(Kg/pcs) : 208. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 434mm.
Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Supplier: 1.hospital beds, 2. heavy machinery used : (turbines all kinds off, generators,feed pumps, compressors, power plants, sugar plants,paper plant,steamboiler) 3.leather products : leather belts mens and womens,leather bags (travel,laptop,office), footwear for mens and womens.4. food products : ( rice, pulses, vegetables, spices, frozen food)