Rated Power : 30KW
Shaft Power : 34.5KW
Rated Wind Speed : 10m/s
Cut-in Wind speed : 3m/s
Cut-out Wind speed : 25m/s
Max Cp : 0.48
Rotor Diameter : 12m
Blade Length : 5.58m
Tip Chord : 230mm
Max Chord : 783mm
Material : FRP
Weight(Kg/pcs) : 112
Direction : Clockwise
Orientation : Upwind
Configuration : Horizontal
Survival Speed : 52.5m/s
Standard : AWEA/IEC
Design Life : 20years
Bolt Circle Dia : 248mm
Rotor diameter: 12.56m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output: 30KW Power supplied to Grid 32KW [in 5seconds] working voltage: DC500/600V,AC220V/380V Annual average energy production: 70MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.5m/s Nominal wind speed: 12.0m/s Storm-stand: up to 55m/s Max rotate speed: 100r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Electro-Yawing,Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Tower style and height Free-standing tower 15m, 18m up to 35m.
Supplier: Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines
Buyer: Sunflower husk pellets
Aluminum blades are durable, strong and not afraid of any external influences. At the same time, they are heavier than plastic ones and require careful wheel balancing.
Rated Power : 50KW Shaft Power : 55KW Rated Wind Speed : 10.5m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.45. Rotor Diameter : 15.2m Blade Length : 7.2m Tip Chord : 289mm Max Chord : 979mm Material : FRP Weight(Kg/pcs) : 208. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 434mm.
Rated Power : 100KW Shaft Power : 120KW Rated Wind Speed : 12m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.43 Rotor Diameter : 19.1m Blade Length : 9.2m Tip Chord : 120mm Max Chord : 1070mm Material : FRP Weight(Kg/pcs) : 278 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 360mm.
Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger