Rotor diameter:
3.2m
Blades quantity:
3pcs
Direction:
always upwind
Blades material:
Glass fiber reinforced plastic
Rated output Power:
1000W
Maximum output power:
1800W
working voltage:
DC24/36/48/96/120/240V,AC220V
Annual average energy production:
2450KWH (in rate 5m/s wind speed)
working wind speed:
3-25m/s
Initial wind speed:
2.5m/s
Nominal wind speed:
8.0m/s17.8mph
Storm-stand:
up to 50m/s
Max rotate speed:
400r/min
Wind turbine type:
Three-phase, PMG Alternator
Working temperature:
from -40 to +60 C
Blade Pitch Control
Fixed Pitch
Over Speed Protection
Auto-furl
Speed regulation methods:
Yawing and electrical magnet switch
Stop Methods
Manual Brake + Hydraulic Brake
Gearbox:
None, Direct Drive
Batttery full charge time:
about 8 hours
Model Fzy1kw, Rotor diameter: 2.8m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 360r/min, Rated output power: 1kw, Max output power: 1500w, Output voltage: dc24v 48v/ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 2500kwh, Recommended accumulators: 12v150ah4pcs( 600ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 45kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box
The 1kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type). It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for lighting, tv, telecommunication equipment and so on. The 1kw wind turbine is mainly composed of generator, blade, tail, hub, controller, dump loader, inverter, tower, tower base, cable , accessories . Main technical performances Rotor diameter (m): 2.8 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 1000/1500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-20 Survived wind speed: 35 Start torque (n/m): 1.5 Rated rotate speed(r/min): 500 Working voltage : dc24v /dc48v Generator style : three phase, permanent magnet, ac Charging method: constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 6/7/8/9/10 Life time: 15years Generator/blade/tail /hub 142*61*31cm 120kg Controller 49*45*31cm 16kg
Blade diameter 2.5m Rated Rotated speed 50 Rated wind speed 10m/s Rated power 1000W Max voltage 1500w Output voltage 24V/48v Start up wind speed 2.5(m/s) Operating wind speed 3-30(m/s) Security wind speed 50(m/s) Height of tower 8m Weight of top section 170/160kg Output controller system charger and inverter Capacity and quantity of battery(reference) 12V100AH 4pcs can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger. wooden case packing.
1kw wind turbine is a device that converts wind energy into electrical energy to charge the battery pack or interface with the public grid. It can be widely used in windy areas. Now we have a 24v/48v off-grid working system and wind and solar hybrid system. It can provide power for lighting, televisions, washing machines, refrigerators, telecommunications equipment, etc. Grid-connected working system: the wind generator outputs a three-phase alternating current, and the grid-connected controller PWM converts the alternating current into direct current, providing a stable direct current voltage for the grid-connected inverter. The power supply can be used for household appliances to interface with the additional power supply of the public grid.
Power: 1KW Rotor diameter: 2.8m Blades quantity: 3 pcs Blades material: FRP (composite material) Rated speed: 360r/min Rated output power: 1000W Max output power: 1500W Output voltage: DC48V/AC220V Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Speed regulation: yaw& magnetic resistance Charge control: AIC (automatic intelligent control) Windturbinetype: PMG (onconstantmagnets) Working temperature: from -40 to +60 C Annual average energy production: 2500kWh Recommended accumulators: 600Ah Accumulators full charge time: about 8 hours Tower type: pull wire tubular tower or cone tower(optinal) Tower height:6m (optional) Weight: 45kgs (without tower) Can Supply Power For: water pump, TV, Washer, Illumine, Fanner, Charge. Packing is by plywood box.
1kw wind turbine YW series is with a good apearance. It's widely used for government project, such as street light. It's usually be used together with solar panel to build the hybrid system. It's used in the 2008 Olympic games and also will be probably used in the coming 2010 world cup.
Main Parameter: Model: TR3.2-1000W Rated Power: 1000W Max Power: 1500W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 48V Start Wind Speed: 2m/s Rated Wind Speed: 8m/s Maximum Wind Speed: 35m/s Rotor Diameter: 3.2m Rated Rotor Speed: 400r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 6m ,9m or 12m
Rotor diameter: 18.0m Blades quantity: 3pcs Direction: always upwind Blades material: Carbon fiber reinforced plastic Rated output: 50KW Power supplied to Grid 60KW [in 5seconds] working voltage: DC500-800V,AC380-400V Annual average energy production: 110MWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 3.0m/s Nominal wind speed: 10.0m/sï¼?33.6mphï¼? Storm-stand: up to 55m/s Max rotate speed: 60r/min Wind turbine type: PM 40 poles synchronous generator, Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch setting Over-speed Protection -Aerodynamic braking system+ -hydraulic rotor brake Speed Regulate and Shut Down Methods -Electro-Yawing, Positive Pitch and -Electric Magnet dumping brake Gearbox: None, Direct Drive Hub height (m) 18-20-24-35 (free-standing or hydraulic tower)
Rotor diameter: 12.56m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output: 30KW Power supplied to Grid 32KW [in 5seconds] working voltage: DC500/600V,AC220V/380V Annual average energy production: 70MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.5m/s Nominal wind speed: 12.0m/s Storm-stand: up to 55m/s Max rotate speed: 100r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Electro-Yawing,Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Tower style and height Free-standing tower 15m, 18m up to 35m.